Bobber Bobber Motorcycles, page #4

I'm selling this bike for my next door neighbor, who rarely rides it since he has too many toys to play with.  I can attest to the quality of the bike and the condition and that the bike has been professionally maintained by a local shop.   Here are the specs.

Built in 2009, only about 2000 miles on it.  Runs and rides great.  The bike is very cool and gains attention where ever you take it.  Has twisted Spokes, 1340 HD EVO, Powder coated frame and tins, front and rear brakes, springer front forks, wife white walls, custom exhaust.  I will deliver it anywhere in south Florida.  Buyer must make arrangements for transportation outside of Florida.  

To my memory, this is the first time in years that a custom Zero Engineering bike has been listed on Ebay (and not via private sale or brokerage). I purchased this bike in 2009 and placed it in the front lobby of my family-owned company office. It lived there for 3 years as decoration, and I took it out to ride around the parking lot occasionally on the weekends, or to get it serviced.

This is a South Florida Choppers built custom Springer ridged with a Harley Davidson 1340cc EVO.  It has a new fat bob 4 gallon tank and all tins were recently powder coated satin black.  The bike only has about 1000 miles on it and runs great.  Only selling because I need the cash.  Very light weight and fast bike. I am the original owner. Buyer will pay shipping.

Up for auction is my custom built 2009 Bobber. I purchased all of the parts during a long deployment to Iraq and assembled the bike upon my return in 2009. I live in Ohio and the bike is located at my fathers in Colorado so I have not had time to ride it and it is a shame for it to sit, hopefully someone will win and it can finally be used the way in which it was intended.

You can not pass up owning this one of a kind motorcycle built by Russell Mitchell @ Exile Motorcycles. This is a beast of a bike !! $ 15,000 OBO willing to deal and all reasonable offers will be considered.  114 cubic inch TP Engineering Engine Jims Transmission with open belt primary Front and rear brakes operated by foot control Twist Clutch designed by Exile All fluids and gaskets have recently been replaced Carburetor cleaned and rebuilt New Battery

DYNO TUNED (WITH DYNO SHEET) ULTIMA EL BRUTO ENGINE I JUST GOT IT OUT OF THE SHOP A FEW DAYS AGO 2500$ WORTH OF WORK DONE IT IS AN ABSOLUTE MONSTER NEW TIRES NEW FORWARD CONTROLS NEW NEW LITHIUM ION BATT AND BATT BOX CARB JUST CLEANED NEW OIL NEW FRONT AND REAR ROTORS NEW CHAIN THIS BIKE HAS NOT EVEN BEEN RIDDEN YET ON THE STREET SINCE BEING BUILT ITS BASICALLY BRAND NEW

Custom 2010 bobber built by Design Worx. Frame is by paucho engine is s&s generator style 93" panhead, baker 4spd trans kick start only. Frame, bars,rims and alot of parts copper plated then antiqued.

selling a custom bobber from billy the kid customcycles, has a 2010 missouri spec contruction title (clear) bike has maybe 2000 miles on it, transmision is out and needs repaired or relaced. has a 110 revtec exotic motor to look like a knuckle head. has a 3 inch open beltdrive that will come with it.

THIS IS A SWEET CUSTOM BOBBER WITH AN 80 CUBE EVO ENGINE SLIGHTLY WARMED OVER WITH A CAM AND A SUPER E CARB, RUNS LIKE A TOP AND RIDES GREAT! FRAME IS POWDERCOATED IN HAMMERTONE CHARCOAL AND THE TANK AND FENDER ARE WRINKLE FINISH BLACK. THIS BIKE GETS THUMBS UP AND COMMENTS EVERYWHERE IT GOES AND JUST HAS A BAD ASS COOL LOOK TO IT!

2010 Custom built Bobber, never used, show room condition from private collection. Great show bike, real head turner, loud and fast Video of bike available upon request. Shipping, Not included in price.

Dream Machines Indian Motorcycle Visit Store 1401 N. Interstate 35 Round Rock, TX 78664 Contact: Our Sales Team! Phone: (512) 309-7503 ext.5 Email: sales@dreammachinesofaustin.com Vehicle Information VIN FLA63818 Condition Used Odometer 1 Stock No A63818 Warranty Unspecified Engine Buell Thunder Storm Transmission 5-SPEED Exterior Color Black Interior Color Flat Black Loan Calculator 2010 Custom Buell Bobber Description *AS COOL AS IT GETS* YOU ARE LOOKING AT A 2010 CUSTOM BOBBER (BIKE DOES NOT HAVE ODO OR SPEEDO SO IT WILL BE TITLED AS NOT ACTUAL MILEAGE).

If you are wanting a custom built motorcycle this Old School Bobber built by C&S Cycles and dubbed the “Black Widow” is one BAD ASS BIKE! Featured on the cover of Full Throttle Magazine with a 2 page center story, this is a one of a kind chance of a lifetime for a real old school biker that’s crazy enough to ride a bike like this!  I really don't even know where to begin describing this one-of-a-kind scooter. To start, I will say that I have never ridden or seen anything like this in my 59 year old life!

This is a award winning bobber built by Mike Bauer and painted by Viking Cycle Art Inc.  It is Featured in the November 2011 issue of V-Twin Magazine ( No. 127) and the March 2012 Issue of Easyriders Magazine ( No.

 Pro-built custom 48 Bobber

Custom Bobber -- This is one sexy bike!! Excellent condition! NEAR NEW!

This is a custom built bike, S&S lower end on the V-Twin motor, 97" axtell jugs are bored out and 10:1 pistons with a hopped up cam.  This bike moves quickly, lots of torque and well balanced.  Breaks have been gone through and stops on a dime.

 2010 Indian Larry Tribute Bobber: PYROMANIAC Hand built custom which took over 820 man hours. Built on frame #17 of the legendary “twisted down tubeâ€� frames built by Indian Larry. Only 1 mile!

Photo Viewer 2010 Custom Built Motorcycles American Steel 1914 Harley Davidson Knucklehead Easyrider Feature AMERICAN STEEL REPLICA 1914 HARLEY DAVIDSON KNUCKLEHEAD EASYRIDER FEATURE VIEW OTHER AUCTIONS ASK SELLER QUESTION Vital Information Year Make ModelMileage Engine Exterior Interior Stock# VIN 2010 Custom Built Motorcycles American Steel 1914 Harley Davidson Knucklehead Easyrider Feature 0 V-Twin Mfg S&S 87ci Knuckle HeadBlack Tan #513011 1A9HS2551AP513011 View All Photos Description 2010 Custom Built Motorcycles American Steel 1914 Harley Davidson Knucklehead Easyrider Feature STELLAR AUTOPLEX IS PLEASED TO BRING YOU THIS ONE OF A KIND FULL CUSTOM 2010 AMERICAN STEEL V-TWIN REPLICA 1914 HARLEY DAVIDSON TO MARKET. THIS BIKE IS STUNNING AND WHEN YOU SEE THIS BIKE IN PERSON YOU WILL NOT BELIEVE HOW BEAUTIFUL IT IS. THIS IS A GENTLEMAN'S BIKE THAT WAS BUILT USING QUALITY PARTS. THIS IS A GREAT OPPORTUNITY TO OWN A FULL CUSTOM BIKE THAT WOULD COST OVER $30,000 TO DUPLICATE TODAY.

If your looking for an attention getter.....This is it! Custom built motorcycle Bobber style Mat Black paint unique solid chrome wheel in the rear, and wire wheel in the front. mechanically the bike is in excellent condition.

2010 Custom, Harley, Bobber, Chopper, with a stock 2001 Harley B motor with Harley 5 speed transmission and a S & S super E carb, Paughco straight leg frame with 30 degree rake and 2�1/4 stretch in down tubes, DNA springer, Rev-Tec wheels, and new Dunlop tires. The front tire is a 21 x 3.5 and the rear is an 18 x 9" (200mm). The bike runs and rides perfectly and has air bags under the seat that you can pump up with a hand held pump.

The RODS AND RIDES BT RACER is a machine inspired from the days of actual Boardtrack Racing. This machine was built for not only speed and function but for the flowing lines as you can see. The massive 23" front and rear tires gives this machine the ability to not only have a different stance than most motorcycles but offers a ride that is unreal.

Up for Sale is a 2011 Sally Sucker Punch Roller. I removed: Wiring Harness Engine/Trans/Chain/Sprocket Battery Forward and Hand Controls Brakes Any Questions Call or Text 717-736-9984

Bike is titled as a special construction. The frame is a harley hard tail frame with a bit of rake in the neck. The engine is a 96 cu inch generator shovel with std cases and s and s flywheels.

2011 Ultima Bobber Ultima 120 motor Ultima 6 speed Ultima starter Mikuni 48 carb Springer front end Springer seat Dual disc brakes Brass forward controls 10" ape hanger bars Short heat wrapped exhausts Headwinds headlight Rear foot pegs mounted into frame ( screw in and out if you want removed ) Suction cup rear seat included 2" open belt primary Chain drive Ridewright wheels 1st. service just completed ( oil change and bike thoroughly checked over ) *** CLEAR FLORIDA TITLE  *** This bobber was built by a licensed Florida State motorcycle builder... Title make: ACYL This bobber can be registered and insured in all states and is a blast to ride...

  Hi there, This bike was only driven approximatly 45 miles.  Its brand new.  There are still stubbs on the tires.  Its a wicked looking bike that runs great.  Fast as heck, loud as heck, and it turns every head on the road.  You will be the talk of any bike rally guarenteed.  It was built by TD Ward out of Missouri and shipped up to me.   He's a great bike builder that took second at the Sturgis bike build off and there are some pretty big names there.  Arlen Ness, Jessy James, etc.... and he took second!!!   And  I know for sure this build was one of his favorites!!! I'm sure it will be worth a ton in no time.  This bike will not let you down.  If I didn't need the money I wouldn't sell it.   I also have no time to ride.  Well, good luck bidding and Thank You, Shan.

2011 Custom Bobber 117 Mile Gray Powder Coat 200 Wide Tire Chromoly Frame ALL TIG Welded and USA Made 34 Degrees of Rake & 4" DT Stretch 107" SMW, Inc Nat Panhead 5 Speed Nat "Kicker" RevTech Transmission 60 Spoke Chrome Wheels or optional SMW, Inc. Billet Wheels SMW, Inc. Knuckler 3 3/8" Open Belt w/ Outer Bearing Support Custom Bobber Gas Tank, 9" High-Grade Steel Rigid Rear Fender Santee Chrome Shorty Pipes Black Leather Solo Seat 16' Chrome Ape Hangers Thunder Heart Wiring Harness and Electrical Chrome Front Headlight and Tail Light assemblies SMW, Inc.

  2011 Custom Rat Bobber 93" S & S Shovel Head, Super E Carb, Ultima 5 Speed, 3" BDL Primary, Suicide Shift, Foot Clutch, No Front Brake Paughco Frame and Chrome Springer, 21" Front Wheel and 16" Rear, Avon Venom White Walls, 11" Rear Brake, Sporty Tank, 18" Bars, Gator Seat Title is Clear Florida ASPT Bike has About 500 Miles Since Build Two Years Ago. No Odometer or Speedometer Very Fast and Fun to Ride. Please see pictures for details.

RODS & RIDES MOTORCYCLE COMPANY The FuKentrike is one of the wildest creations from Rods & Rides Motorcycle Company. The trike features the same performance and the same quality as the rest of the line up we build. As always the Ultima Performance El Bruto series engine is what the trike is built around. This engine produces 110 HP at the rear wheels.

One of a kind Special Construction Hardtail Old School Bobber - completed 2011. Have tons more pictures here:https://plus.google.com/photos/110483167355382798606/albums/5815749539318629361 Freddies Frames custom frame and springer front end, one off unique design. Paint by Hellbound Custom, Reno Air Race themed bike, with airspeed indicator for speedo.

This is a no reserve auction for our Hot Rod Bobber Chassis.  This package includes a Polished 113" Ultima motor, polished 6 speed tranny, polished 3.35" open belt drive, Frame (30 degree neck and 0 stretch), Chrome Springer, 40 spoke powder coated wheels, tires, fuel tank, round oil tank with battery box, handlebars (pictured with 16" apes or drag bars your choice), risers, axles, spacers and neck bearings, The frame is completely tig welded and made in the USA. This set-up is a great start for a cool old school bobber that will eat crotch rockets for a snack.

Up for Auction an awesome built 2011 Custom Show Motorcycle Bobber style motorcycle built on a Kraft Tech soft tail frame 113 cubic inch motor, 6 speed tranny, open belt primary- all by Ultima 5 spoke wheels, discs, pulley - all by RC Components LePera seat Wild Ones Outlaw handlebars Metzler tires Indian Larry gas tank Performance Machine brakes Vance and Hines Big Shot Shorts exhaust Front fender(not shown in photo's) Custom paint by Mike Meyers This bike is for sale or trade. Will listen to any to your offers. Contact Jack 515-577-8291 Buyer responsible for shipping or will deliver to lower 48 for $500.00 Good Luck Bidding    

The bike will be sold to the high bidder in this No Reserve auction. Custom built by Three Two Choppers in Fort Worth, TXTitles and registers as a Three Two Choppers S&S 111 engine Baker Powerbox 6 speed transmission Rivera Primo Slimline Belt Drive Brembo Brake Calipers Rampage Carson City wheels PM Hand Controls Jaybrake Foot Controls Jeri's Springer Front End chopper bobber custom motor cycle motorcycle one off

complete bike, needs to be assembled and painted, all brand new parts, ultima evo motor 120 in 140 hp, exterior belt drive, have all MSO and receipts, motorcyle brand new and not titled yet

HERES ONE YOU DONT SEE EVERYDAY..... CUSTOM BUILT LEROY THOMPSON CUSTOM HARDTAIL DROP SEAT CHOPPER BOBBER!! BUILT IN 2011 CUSTOMER PAID 22000.00 FOR HER, PRETTY MUCH A HANDBUILT CUSTOM....

Penn Jersey Cycles bobber...I had the bike built and had a baby soon after. Now I have 0 time for the bike. It's a rigid with a springer fron end, 80' evo motor or 1340cc...its a bad a** bike

 RODS & RIDES 330 DROPSEAT BOBBER     The Dropseat Bobber is what put Rods & Rides on the map. This machine was built for not only speed and function but for the flowing lines as you can see. The massive 23" front tire and the outrageous 330mm rear gives this machine the ability to not only have a different stance than most motorcycles but offers a ride that is unreal.

       2012 CUSTOM BUILT BOBBER * S&S 110' MOTOR* 5 SPEED TRANSMISSION* 60 SPOKE FRONT WHEEL* SOLID ALUMINUM RER WHEEL* RIVERA OPEN BELT PRIMARY* FLAT BLACK PAINT* REAR SPROTOR* ONE OFF MEXICAN BLANKET SEAT* BUILT WITH THE BEST OF EVERYTHING LOW RESERVE

2012 South Side Kustom Bobber (includes everything but ENGINE)normal nicks and scratches, needs some wiring help but a new in box ultama wiring harness is includedTHIS BIKE HAS NO ENGINE!! I REMOVED A 96CI S&S, IT INCLUDES EVERYTHING SEEN IN PICTURES EXCEPT THE MOCK UP ENGINE USED TO SHOW THE COPPER !!!V-TWIN SPRINGER FRONT END - NEW THIS SPRINGCOMPUFIRE HIGH TORQUE STARTER- NEW THIS SPRINGULTAMA WIRING HARNESS - NEW IN BOXULTAMA 6 SPEED ULTAMA 2" OPEN PRIMARYDYNA ADJ IGNTION S&S SUPER E WITH INTAKEBATTERYNOTE: THIS WAS A RIDING BIKE 3 WEEKS AGO, I DONT TRUST THE WIRING AS STATED ABOVE, THE PICTURES SHOW AN ENGINE THAT IS NOT INCLUDED THIS IS LOCAL PICK-UP ONLY

NO RESERVE Info: This is a practically new Custom Bobber built at Southern Motorcycle, Inc with a CLEAR State Title.   Not a garage built or personal built custom, we built it here in our facility by certified technicians, and titled in the state of Oklahoma.   The parts used to make this bike are 90% USA made from Leading Manufactures, and we listed the major parts below.    We used this motorcycle mainly as a advertisement and display bike for our wheels, rotors, forward controls, and engine.   It has less than 500 miles on the bike.  We are putting it up for auction because we have new projects and advertisements we are doing.     The value of the bike is estimated at above $20,000, but we are auctioning it off with NO RESERVE Here is a parts list: Kraft-Tech Frame 28 degrees with FXR swingarm (USA) 127ci Southern Proof Engine with S&S Carb (USA) 3" BDL Open Belt Drive (USA) Terry Components starter (USA) 6-speed AU Transmission (Korea) Progressive Rear Shocks (USA) GMA Controls (USA) HHI Brake Calipers, brackets, and HW (USA) Goodrich lines and cables (USA) USA made leather seat, dash cover, and grips (USA) Southern Black Contrast Octane Wheels, rotor, and sprocket (USA) Southern Black Contrast Forward Foot Controls (USA) Midwest Front End forks and trees (Taiwan) Avon Tires 150/18 front and 200/18 rear (USA) Dakota Digital Speedo and pick-up (USA) USA made wiring harness (USA) Two tone Black Paint (gloss on the bottom and matte black on top and sides)  How it Rides: The motorcycle rides great (probably the best custom we have rode).   It sits low to the ground, but handles good on corners, but does not lean like a Softail or Sporster.  It has beyond enough power, maybe too much.     Condition of Motorcycle: We guarantee everything is in good working order at the time of purchase with NO DAMAGE.   As with any custom bike, it is like owning a race car, just requires more maintenance and up keep.   The motorcycle is sold as is only.   If you ever need parts, they are easy to find or you can get them through Southern Motorcycle, Inc.

I have a 2012 bobber for sale that was built by Capones Customs out of  Shelbyville Indiana. Has a 107 ultima motor with 6 speed ultima tranny. Very low hours!!

 Whole shot. This is a full custom one of a kind bike built in 2013. This bike was built by KAELINS custom cycles. New S&S 89ci motor built by custom design studios in Novato CA.

2012 custom bobber has a S&S motor 88 ci completely rebuilt. 6 speed ultima tranny new and a ultima 3 in open belt primary new. New paint and new tires and new set of hooker pipes nice and loud.

2012 custom bobber S&S 88ci motor completely rebuilt from bottom to top. Ultima 6speed tranny new . Has a new ultima 3 in open belt primary .

2012 rooke style bobber 113 Midwest ultima 6 spd ultima 2" ol school belt 250 rear This bike was finished mid summer 2012 and has estimated 500 miles on it , runs and drives perfect ,  The orange chopper in the last picture could also be had for $14,000.00

Custom Harley Rigid Bobber- Professionally built- Kraftech frame, 80'' Evo style motor with a mild cam,Built on S@S cases and every thing else Harley OEM parts. Super E polished carb. 5 speed tranny linked to a BDL 3'' open belt.

2012 COMPLETE CUSTOM BOBBER 113 S&S MOTOR MOTOR IS BUILT WITH ALL S&S PARTS. S&S SUPER G CARBURETOR ULTIMA 6 SPEED TRANS ULTIMA IGNITION SYSTEM. THE BIKE WAS JUST COMPLETED IN OCTOBER 2012.

2012 Bobber bobber, Just built. 113ci S&S motor and much more!

Bad Azz custom build!  I call this bike "Twisted Medal".  It is a ONE OF A KIND! Comes with certificate of origin This bike is begging for a shovelhead or an Evo motor and kick start transmission.  Fenders are custom with twisted struts and twisted front fork brace/fender mount. 2012 Kraft/Tech Rigid Frame quality manufactured in the USA 30 degree rake 0 down tube stretch colors are red and black wide glide front end painted black lowers  painted aluminum triple trees 1-1/2" chrome handlebar risers spring solo saddle with tank, pegs, bars, wheels, tires, and kick stand headlight is old school 1955 Chevy pick up tail light is altered for LED  low slung solo seat with brass plated hairpin springs 15", 1-1/2" custom made fatty ape hangers - drilled and dimpled will accept Harley controlls painted triple trees and lowers - gives the bike that bad boy look paint that is on bike for display purposes, can be repainted comes with new rear wheel and old school back tire/new comes with used front wheel and tire with old school tire comes with used brake rotors minor rusting on front spokes that will clean up with steel wool oil tank/battery box custom made with twisted metal trim new gas tank with custom twisted metal trim custom made twisted pegs custom made twisted fender struts custom made twisted metal on fuel tank custom made twisted metal on oil tank trimmed in brass hardware All twisted metal parts were custom made by me (metal blacksmith) Add motor, transmission, turn signals, wiring and it's ready to go.

Selling my custom built bobber. Hardtail with springer front. Satin black and red paint.

2012 Sucker Punch Sally 66 Bobber Original owner and purchased from a Sucker Punch Sally Dealer Mileage - 254 Engine - S&S Harley Davidson Evolution Type ohv 45 Degree V-Twin Carburetor - S&S Super E Displacement - 81.6 Cubic Inch 1340cc Bore & Stroke - 3.498 x 4.250 Compression Ratio - 8.5 to 1 Fuel Capacity - 2.25 Gallons Oil Capacity - 3 Quarts Transmission - 6 Speed RevTech Primary Drive - Belt Final Drive - Chain Dry Weight - 495 Lbs. Frame - 30 Degrees No-Stretch Rigid Frame Front Suspension - 41 mm Telescopic with Pro-One lowers Seat Height - 24 Inches Ground Clearance - 4 Inches Wheelbase - 65 Inches Front Brake - Four Piston Rear Brake - Four Piston Front Tire - 16 inch Rear Tire - 180/60vb-16 Ignition  - Dual Fire Electronic Message or email for any further details

 THIS Bobber built for advertisment and promotion af a famous clothing company. " TRUE RELIGION SPRING 2012 - THE REBEL " Check this web site ! http://www.youtube.com/watch?v=kkXdqguDYxU AND IT IS LOUD, FAST, AND FUN TO RIDE.

Harley Davidson 103" Twin Cam Motor Baker 6 Speed RSD Transmission Rolling Thunder Frame (Heavy Duty Great Frame) ! Springer Front End- Works Awesome !     Rides Great for a Rigid with spring seat and big tire ! 300 Rear Tire Ride Wright Custom Wheels (Black w/ Gold Spokes)   No Paint !   It looks so cool like this I never took it apart to paint it !    No turn signals !

Smooth, low and fast... this is a custom build 2013 Harley Soft Tail Bobber, 4.5 stretch mono shock has a 1978 xs650 Yamaha engine that is completely redone top and bottom with 277 rephrase crank and cam. 38 carbs with air pods, electric and kick start.

Photo Viewer 2013 Custom Built Motorcycles Bobber Custom 330 Chassis RODS & RIDES BY TD 330 CHASSIS - DROPSEAT BOBBER CUSTOM GRAY PAINT - LOW MILES VIEW OTHER AUCTIONS ASK SELLER QUESTION Vital Information Year Make Model Mileage 2013 Custom Built Motorcycles Bobber Custom 330 Chas... 100 Exterior Interior Stock # VIN GRAY/BLACK/SILVER BLACK F7847 1R92H2A19DS699302 Engine view window sticker view new window sticker Photos TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 Description 2013 Custom Built Motorcycles Bobber Custom 330 Chassis RODS & RIDES BY TD, LLC. 330 CHASSIS - DROPSEAT BOBBER WORLD FAMOUS MACHINES BUILT BY HAND, ONE AT A TIME .

I'm selling my 2013 bobber built by Revolutions Speed & Customs Inc.  This bike still has the original builder title and has never been titled in anyone's name.  I honestly purchased the bike to flip. I'm getting married in October and I'm using the money to help pay for that.  When I purchased the bike, it wasn't in running condition.  The gas smelled like paint thinner.  The bike had been sitting for a long while and I bought it without being able to hear it run.  The previous owner just let it sit in his garage, it never even had a license plate mounted to it. I got it running after a gas tank flush and going through the carb.

Any question feel free to call/text 713-859-1987.  2013 Bobber, Pro Built, Redneck EngineeringFrame: Redneck Engineering Mutant Name: Bob This Engine: Buell S1 White Lighting 1203 cc Engine Color: OD green and Gloss Black Paint (military style).  Check out redneckengineering.com and you will see the base price on this bike is $22,995.00 with no options or upgrades like I have below. Many custom parts on the bike were built only for this bike. This is a very cool bike and gets attention every time it hits the street. 105 hp and light weight for a chopper so its fun to ride.

CUSTOM BOBBER, HIGH END BUILD, THE BADDEST BIKE AROUND. 30" CUSTOM WHEEL, AIR RIDE, CUSTOM LEATHER AND PAINT, 5 SPEED, RUNS GREAT, VERY FAST, SERIOUS BUYERS ONLY 29,900 WILL GO UP IN THE SPRING. THIS IS DIRT CHEAP AND ONLY FOR SALE BECAUSE OF MOVE.

This is a professionally built, old school, rigid frame big twin bobber. It was built in 2013 and has a clean Colorado title. This wicked machine is loaded with power!

 Exile fatbob harley night train Real exile bike brand new build using a Harley 2001 Night train. has a Harley title so no issue on registering. Brand new bike has less than 700 miles on it since new build.