Bobber Bobber Motorcycles, page #6

          MALIBU MOTORCYCLE WORKS 818-300-4299 ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 70 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS 1977-2003 SPORTY , OR 1990-2002 BUELL ( NOT BLAST MODELS )  2015  SUPER FUNK   250 SPORTSTER / BUELL BOBBER   RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 40 DEGREE RAKE   ,4  INCH BACK BONE STRETCH, 0 UP STRETCH ,, 250 RIGHT  SIDE DRIVE, ,, , OIL TANK UNDER MOTOR   ,SPRINGER   FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   18X8.5,26X3.5  FAT SPOKES  WHEELS WITH BILLET HUBS    . AVON    FRONT AND REAR TIRE  , REAR FENDER (REAR FENDER SUPPORT ALSO INCLUDED ,)     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,   RAPED APES  BARS,NECK CUPS , RACES , WHEEL SPACERS      NOTE :THE SHEET METAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW HOT ROD LEAF SPRING , 200 TIRE BOARDTRACK RACER , WHITEWALLS    HOT ROD BOARDTRACK RACER   2015 MMW  HOT ROD  BOARDTRACK  RACER  200 REAR , 21 FRONT  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 36 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  LEAF SPRING      FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)18X5.5 , 21X 2.15 RED WIRE WHEELS    WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

2015 CUSTOM BOBBER Top Line Information Year: 2015 VIN: MVIN357797IND Make: CUSTOM Stock: A1206 Model/Trim: BOBBER Condition: Pre-Owned Engine: 95 cc HARLEY DAVIDSON Exterior: Black Transmission: 6-SPEED Mileage: 500 Additional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * * Phone: (630)425-3237 Alt: (630)624-8303 DescriptionCUSTOM SHOVELHEAD BOBBER!!! 2015 CUSTOM BOBBER FRESH 79 SHOVELHEAD MOTOR 95CI: S&S 4 5/8 FLYWHEEL, RODS, FORGED PISTONS(9:5:1) ANDREWS C CAM MANLEY STAINLESS VALVES, HIGH LIFT SPRINGS W/ TITANIUM COLLARS SOLID LIFTERS ROWE CAST IRON GUIDES COLONY ALUMINUM PUSH RODS STEEL BREATHER GEAR MILD HEAD PORTING STEEL BREATHER GEAR REBUILT STOCK OIL PUMP CRAFTTECH SOFTAIL FRAME ULTIMA 6 SPEED TRANSMISSION HYDRAULIC CLUTCH CHROME SPOKE WHEELS SPRINGER FRONT END CUSTOM LEATHER SEAT 2 SETS OF EXHAUST   At our dealership we work very hard to accurately describe our vehicles through text descriptions and elaborate photos. When you purchase a pre-owned vehicle it is not a new vehicle.

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW SCHWINN STYLE 23,23     BOARDTRACK RACER WITH HOOP  SPRINGER    SCHWINN STYLE    2016 MMW  SCHWINN  STYLE BOARDTRACK   23'S  FRONT AND BACK  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 35 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  SPRINGER     FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)23X3.75 , 23X3.75 WIRE   WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS ,SPECIAL SHOCK    SPRING SEAT , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

THIS IS A 2016 CUSTOM BOBBER THAT I BUILT THIS YEAR FOR MYRTLE BEACH BIKE WEEK. IT IS A 240 REAR TIRE RIGID FRAME THAT IS 4 UP 2 OUT AND 38 ON THE NECK. THE FRONTEND IS A STOCK CHROME THAT IS 4" OVER AND A 5 DEGREE TREE.

Fresh build. Donor bike was a 94 XL 1200 with 3943 original miles. Have built a few of these over the years, mainly for the therapeutic garage time.

    MALIBU MOTORCYCLE WORKS CALL US 7 DAYS A WEEK 818-300-4299 MIKE SIMS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE     PLEASE CALL ME  818-300-4299 OR E-MAIL ME   FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO 2016 OG DRAG STYLE TRIKE , SOFTAIL , 23 FRONT    2016 MMW  OG DRAG   STYLE  TRIKE ROLLING CHASSIS  , , SET UP FOR EVOLUTION MOTORS, SHOVEL HEAD , PAN HEAD ECT ECT  UP TO 127 INCH AND TWIN CAM A  ( USES A TWIN CAM REAR ADAPTER BRACKET) , SOFTAIL  ,30 DEGREE RAKE  ,0 INCH BACK BONE STRETCH ,0  UP   STRETCH  , LEFT SIDE DRIVE,  , ,, ROUND  OIL TANK  ,BLACK   FRONT FORKS (  OTHER FRONT FORKS AVAILABLE 41MM , INVERTED ECT ECT )     15X10 CORVETTE   WHEELS BLACK  POWDER COATED ( OUTSIDE BEAUTY RINGS AVAILABLE),  ,  TIRES   ,23 FRONT WIRE WHEEL   (WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BILLET BLACK ,POLISHED OR CHROME FINISH ,WIRE WHEELS.) .   ,   ,CAN BE SET UP FOR PASSENGERS, , NEW BEARINGS AND WHEEL SPACERS,REAR ROTORS AND CALIPERS INCLUDED , SET UP FOR CHAIN OR BELT WITH DIFFERENTIAL , CUSTOM     GAS TANK  ,CUSTOM HAND MADE BARS , RISERS , CHROME ADJUSTABLE SHOCKS REAR SLIPPERY DIFFERENTIAL     THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     . LOCATED IN SOUTHERN CALIFORNIA FOR INSPECTION AND PICK UP OR I WILL SHIP WORLD WIDE On Aug-30-07 at 08:22:39 PDT, seller added the following information:

Custom built bicycle with a 48 cc engine. One of a kind frame with 3 year warranty.  Max speed of 55 MPH.- Front and rear fenders- 7/8 Gallon gas tank- LED Headlight- Springler suspension- 4 Stroke automatic motor- 2 HP - Ignition by pull starter - Mechanical disc brakes 

 RODS & RIDES MOTORCYCLE COMPANY SAINT LOUIS, MISSOURI USA SPECIAL ORDER, PLEASE ALLOW 8-10 WEEKS FOR COMPLETION RODS & RIDES 330 TRIKE CHASSIS SPRINGER FRONT END BLACK OR CHROME SPOKE WHEELS FAT BOB SPLIT TANKS TWO TONE PAINT OR MONO WITH PIN STRIPES EL BRUTO EVO ENGINE 6 SPEED TRANSMISSION DUAL 4 PISTON BRAKES 3.35" OPEN BELT DRIVE TOLL FREE: 855-ROD-RIDE

 RODS & RIDES DROPSEAT BOBBER The Dropseat Bobber is our #1 Selling Motorcycle for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The seat sits twenty inches off the ground and allows the rider the true dropseat feel.

 RODS & RIDES DROPSEAT BOBBER The Dropseat Bobber is our #1 Selling Motorcycle for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The seat sits twenty inches off the ground and allows the rider the true dropseat feel.

A beautiful machine you will get the looks and the questions where ever you ride to.Way to many extras to list must see to appreciate 

Custom built bobber, 96 inch shovel with 6 speed trans. Too much to list , please call or text Scott for all info. 317-395-4011Delivery is available Built by capones street rod motorcycles

            MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   2016 MMW FATSO ROLLING CHASSIS, EXILE STYLE FAT FRONT TIRE BOBBER ,  RIGID ROLLING CHASSIS  SET UP FOR EVO OR TWIN CAM A  , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,,  LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX  ,  BLACK    SPRINGER FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16 FRONT WITH 150 TIRE  ,16 REAR WITH 200  TIRE, WIRE WHEELS WITH BILLET HUBS AND STAINLESS   SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE  AVAILABLE ).  AVON TIRES   , REAR FENDER     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, SUPER MX BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION) NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL   . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .

BUILT BY RODS AND RIDES BY TD  ST LOUIS, MO.    Rods & Rides is not just a brand name, it's a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA.  The brand is a very well known name in the national motorcycle shows,  magazines, and several TV channels but that's not where is stops.

Up for sale is a freshly built Kraft Tech Rigid. I purchased the bike nearly completed and did the entire build all over again ensuring everything was done the correct way with the appropriate parts. The bike has never been titled because the previous ownership never had completed it.

Custom build by Dos Homdres Cycles. Paint by Viking Cycle Art. Inc.

MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 50 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS EVO , SHOVELHEAD  , PANHEAD MOTORS  2016 MMW OG OLD SCHOOL STOCK TIRE WHITEWALL     RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0 UP STRETCH ,,LEFT   SIDE DRIVE, ,, ,BARREL OIL TANK  ,SPRINGER    FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16X3.5   ,21X2.15   CHROME   WIRE WHEELS (CHROME ,BLACK , RED AND ORANGE ALSO AVAILABLE).  TIRES  ,  CUSTOM REAR FENDER      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM    STYLE GAS TANK  (SEVERAL TO CHOOSE FROM) ,    CUSTOM  BARS WITH  RISER , WE ALSO HAVE CHROME APES, KICK STAND    NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       .

Toll Free Number: (855)-ROD RIDE Rods & Rides is not just a brand name, its a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA.  The brand is a very well known name in the national motorcycle shows,  magazines, and several TV channels but that's not where is stops. The brand can be found in many value guides as well, one of which is KBB (Kelly Blue Book).

 RODS & RIDES BT RACER The BT Racer is one of our #1 Selling Motorcycles for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The motorcycle is also not a little bike like so many others, it measures an whopping eight foot long and riders that are six foot plus look more fitted than any other bike in the market place.

Toll Free Number: (855)-ROD RIDE Rods & Rides is not just a brand name, its a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA.  The brand is a very well known name in the national motorcycle shows,  magazines, and several TV channels but that's not where is stops. The brand can be found in many value guides as well, one of which is KBB (Kelly Blue Book).