Bobber Bobber Motorcycles, page #3

You are bidding on a very complete rolling chassis in excellent condition. I am the original owner, and primary builder. It has very low mileage because it was constructed to showcase the Keck 120 billet motors (which I also built), and was used at trade shows and events.

I have too may bikes and toys so its time to let this one go.  Its a rigid bobber with a Pughco frame.  I made custom air bags under the seat so you get the look and ride of a rigid but it cruises and goes down the road soft and smooth. Has a 88 cu in revtech, its the updated one so no problems there.  Just had the paint done with a pearl green metallic over 20 coats of paint, the pics don't do it justice. The shifter is custom made and is out of 316 polished stainless,  also custom made clutch pedal.  Has a Jaybrake billet master and Brembo brakes.

Up for sale is my custom 2009 bobber.  This is a kit bike by Southern Motorcycle Works which sells for $11k new. It's a hardtail with a 100" ultima v twin, ultima 6 speed transmission with a BDL 3" open belt drive.  Springer front end, disk brakes front and rear, no gauges.

2002 custom bobber / chopper/softail cruiser.5500 miles- ** 80 evo engine, 5 spd rev tech tranny ( kick start ), velocity stack on carb / pipes wrapped in black pipe cloth.new oil change, ** Amazing ghosted silver flames on paint job. ** new battery, runs great, sounds great and its CHEAP! Michigan assembled title.  **cheap insurance because of what i valued it at. kicks over on the first kick.everything works.

Selling my Harley Davidson Sportser 1200 bobber bike runs and looks great. 1200ccsportster motor with points conversion "cleaner wiring" Bike has hardtail Paughco 0x30 frame. Have salvage title for motor as well as the bill of sale for Paughco frame"numbers stamped in frame by Paughco" owner will need to have bike inspected to be registered have all necessary paperwork.

Runs and sounds amazing This is one of a kind motorcycle 

2008 custom built bobber based on a kicker 5150 kit bike. 250cc vtwin, custom airbrushing and pin striping. Hand fabricated side air draft intake/bug eye air filter, hand fabricated horse shoe shaped faux oil tank.

2005 PROPER CHOPPER, 357 BOBBER 107ci S&S ENGINE  5 TRANSMISSION  130/90/16 FRONT TIRE  140/90/16 REAR TIRE  12' CUSTOM APE HANGERS  NEW BATTERY  FRESHLY WRAPPED EXHAUST PIPES  IT COMES WITH THE FRONT FENDER AND MOUNTING HARDWARE , BUT I LIKE HOW IT LOOKS WITHOUT IT ON. THIS BIKE IS A MONSTER TO RIDE , SUPER QUICK AND TON'S OF TORQUE  I WOULD NOT RECOMMEND THIS BIKE FOR A BEGINNER STARTS GREAT AND RIDES GREAT  TEXAS RESIDENTS ARE RESPONSIBLE FOR ALL LOCAL STATE LICENSING FEE'S PLEASE EMAIL, CALL OR TEXT WITH ANY QUESTIONS  THIS BIKE IS FOR SALE LOCALLY SO AUCTION MAY END EARLY 

Penn Jersey Cycles bobber...I had the bike built and had a baby soon after. Now I have 0 time for the bike. It's a rigid with a springer fron end, 80' evo motor or 1340cc...its a bad a** bike

THIS IS A SWEET CUSTOM BOBBER WITH AN 80 CUBE EVO ENGINE SLIGHTLY WARMED OVER WITH A CAM AND A SUPER E CARB, RUNS LIKE A TOP AND RIDES GREAT! FRAME IS POWDERCOATED IN HAMMERTONE CHARCOAL AND THE TANK AND FENDER ARE WRINKLE FINISH BLACK. THIS BIKE GETS THUMBS UP AND COMMENTS EVERYWHERE IT GOES AND JUST HAS A BAD ASS COOL LOOK TO IT!

2012 Sucker Punch Sally 66 Bobber Original owner and purchased from a Sucker Punch Sally Dealer Mileage - 254 Engine - S&S Harley Davidson Evolution Type ohv 45 Degree V-Twin Carburetor - S&S Super E Displacement - 81.6 Cubic Inch 1340cc Bore & Stroke - 3.498 x 4.250 Compression Ratio - 8.5 to 1 Fuel Capacity - 2.25 Gallons Oil Capacity - 3 Quarts Transmission - 6 Speed RevTech Primary Drive - Belt Final Drive - Chain Dry Weight - 495 Lbs. Frame - 30 Degrees No-Stretch Rigid Frame Front Suspension - 41 mm Telescopic with Pro-One lowers Seat Height - 24 Inches Ground Clearance - 4 Inches Wheelbase - 65 Inches Front Brake - Four Piston Rear Brake - Four Piston Front Tire - 16 inch Rear Tire - 180/60vb-16 Ignition  - Dual Fire Electronic Message or email for any further details

custom bobber built to cruise and look cool major head turner. many hiding detailed touches. the frame is backhalfed professional done including paint and powder coat.

Up for grabs is a 1973 ironhead chopper. Over 8.5K Invested in it.  1973 1000/Bored to 1100 Ironhead motor in a 2003 Harley sportster hard tail frame and a springer front end. This is a bad ass one of a kind bike.

 Exile fatbob harley night train Real exile bike brand new build using a Harley 2001 Night train. has a Harley title so no issue on registering. Brand new bike has less than 700 miles on it since new build.

Selling a one of a kind custom built Bobber. It was built using a 2007 Flyrite Bobber frame. It is a hard tail with a springer front end.

SRK Cycles  |  155 E. Sun Hill Rd. Manheim, PA 17545   |   (717) 395-8892   |   www.srkcycles.com Detailed Walk-Around Video Commentated Test Drive Video 2007 Custom built Bobber   Who We Are Not computer savvy?

STANDARD 88 PAN HEAD REPLICA MOTOR.  REV TECH 4 SPEED REPLICA.  BELT DRIVE PERFORMANCE CLUTCH.

complete bike, needs to be assembled and painted, all brand new parts, ultima evo motor 120 in 140 hp, exterior belt drive, have all MSO and receipts, motorcyle brand new and not titled yet

Custom 2010 bobber built by Design Worx. Frame is by paucho engine is s&s generator style 93" panhead, baker 4spd trans kick start only. Frame, bars,rims and alot of parts copper plated then antiqued.

2005 Honda shadow that has been professionally built.. Frame has been stretched widened and lowered. 1930s ford taillight powder coated Springer white leather Seat Custom Dual pinstriped Headlights custom exhaust with Flame thrower Kit!

I'm selling my 2013 bobber built by Revolutions Speed & Customs Inc.  This bike still has the original builder title and has never been titled in anyone's name.  I honestly purchased the bike to flip. I'm getting married in October and I'm using the money to help pay for that.  When I purchased the bike, it wasn't in running condition.  The gas smelled like paint thinner.  The bike had been sitting for a long while and I bought it without being able to hear it run.  The previous owner just let it sit in his garage, it never even had a license plate mounted to it. I got it running after a gas tank flush and going through the carb.

 This Custom Bobber I am listing for a friend. He is building a couple motorcycles and needs some extra cash to finish them. This is one awesome motorcycle with an awesome paint job.  It's a 2000 Harley Davidson Sportster 883 with a 1200 kit installed.

Custom Bobber by Chop Machine Custom Motorcycles. We use only quality parts on all of our builds. We also put the original VIN number back in the neck so all of our bikes retain the original Harley Davidson title.

Used Motorcycle Store 1903 IL Route 120, Mchenry, IL 60051 2235 South Eastwood Drive, Woodstock, IL 60098 EBizAutos  2000 CONFEDERATE CONFEDERADO CONFEDERADO 2000 CONFEDERATE CONFEDERADO PHOTOS PHOTOS REQUEST MORE INFO VIN: 1C9SB2753YB071008 Stock #: U2325M Condition: Used Clear Title Mileage: 12,401 Engine: V-TWIN 1666cc 102ci Exterior Color: Black PHOTO VIEWER VIEW OTHER AUCTIONS EMAIL A FRIEND MORE DETAILS Vehicle Overview 2000 CONFEDERATE CONFEDERADO  BLACK  FEATURES AND ACCESSORIES:  102ci ENGINE SUPERTRAPP EXHAUST INVERTED FRONT FORKS 12,401 MILES  888-933-7674 Used Motorcycle Store 888-933-7674 - We sell motorcycles, arrange motorcycle financing, perform world class motorcycle service, accept trade-in vehicles, purchase vehicles outright, and have arranged delivery for hundreds of vehicles all over the world. We offer motorcycle rentals and arrange fantastic motorcycle tours from both locations during the riding season. Our showroom is open Monday - Thursday 10:00A.M.

Harley Davidson 103" Twin Cam Motor Baker 6 Speed RSD Transmission Rolling Thunder Frame (Heavy Duty Great Frame) ! Springer Front End- Works Awesome !     Rides Great for a Rigid with spring seat and big tire ! 300 Rear Tire Ride Wright Custom Wheels (Black w/ Gold Spokes)   No Paint !   It looks so cool like this I never took it apart to paint it !    No turn signals !

AZautorv.com 320 S El Dorado Suite 4, Mesa, AZ 85202 888-621-8889 2014 Johnny Pag Ventura VINL8YPDRLG7EY000118 ConditionUsed Mileage4 Fuel TypeGasoline TransmissionManual 5-Speed Exterior ColorRed Stock Number000118-1 Address: 320 S El Dorado Suite 4 Mesa, AZ 85202 View Map Phone888-621-8889 This eBay Listing Template is created by Carsforsale.com. Call 1-866-388-9778 to find out how Carsforsale.com can service your dealership.

Custom built bicycle with a 48 cc engine. One of a kind frame with 3 year warranty.  Max speed of 55 MPH.- Front and rear fenders- 7/8 Gallon gas tank- LED Headlight- Springler suspension- 4 Stroke automatic motor- 2 HP - Ignition by pull starter - Mechanical disc brakes 

2009 Chopper stripped down bobber with less than 3k miles. This bike is light, fast and fun as hell to ride. Comes with: Ultima Wolfdaddy Frame Harley 80 Evo Motor CV Carb recently rebuilt with sportster needle Arlen Ness Big Sucker Ultima Open Belt Primary WCC Villan Tank LA Chopper Risers w/ Flanders Bars PM Hand Controls New All Ballz Starter Push Button Starter New front tire No turn signals, no fancy wiring, low miles and strong running Harley crate motor.

If your looking for an attention getter.....This is it! Custom built motorcycle Bobber style Mat Black paint unique solid chrome wheel in the rear, and wire wheel in the front. mechanically the bike is in excellent condition.

Rolling frame with motor. 1973 Honda cb350 K scrambler that has had a TC Bros weld on hard tail added. Build your own bike from this solid powerplant!Comes with all new wiring harness and electronics in tact. Ran until stripped. 

Fall Special. Custom, Bobber. Honda CFMT.

BUILT BY RODS AND RIDES BY TD  ST LOUIS, MO.    Rods & Rides is not just a brand name, it's a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA.  The brand is a very well known name in the national motorcycle shows,  magazines, and several TV channels but that's not where is stops.

2012 Bobber bobber, Just built. 113ci S&S motor and much more!

I have here a suzuki s50 that I bought new in 2007 and am the origional owner of. Theese bikes make awesome bobbers! look at the internet and you will see great examples.

Custom Harley-Davidson Evo Motor Bobber by Stevensons Cycles,(Steve Broyles -Owner/Builder: 734 641-2200 any questions, contact Steve, he is more than happy to answer all questions about this custom build he created! Motor: Evo 80 CI/With custom Cam/Trans-6 speed/Chrome Springer Front End! Custom seat/ Bobbed rear fender/Chrome Sissy Bar/Tear drop Gas Tank....SEE PICTURES FOR FULL VALUE

2006 CUSTOM PRO STREET. RIGID FRAME 250 REAR TIRE. 21 INCH FRONT WHEEL.

For sale is a 2009 Hardknock Kikker 5150 bobber style 3/4 size chopper with a 125cc gas engine that runs great. These motorcycles are bought in kit form from: kikker5150.com. You pick the rolling chassis than add the options you want to complete it.

1 UP CUSTOM MOTORCYCLE JUST BUILT 2014 121' total performance moter 135 horse power less then 1500 miles on moter baker 6 speed transition chain drive 1 of a kind springier front end 23"frount tire custom spoke wheels custom seat custom paint MUST SEE TO APPRECIATE

A beautiful machine you will get the looks and the questions where ever you ride to.Way to many extras to list must see to appreciate 

A completely rebuilt 74 cubic inch iron head sportster. Motorcycle runs great. I purchased this bike as a basket case in 2002 and spent 2 years putting it together.

Custom 2007 Bobber. Six speed 100 inch Revtech. 6,900 miles.

Custom Old Skool Bobber 2008 Up for sale is a 2008 Bobber Hard Tail Kraftech Frame with a 34 degree on the neck 2" stretch on the back bone, with Black Powder Coat. Power is delivered by a Rev Tech 110" backed by a Baker 5 Speed Trans, Left side Chain Drive PM Sprocket, Brakes Calipers, Foot and hand controls are also PM products. Custom Mikuni Carburetor and a Hooker Header with Titanium heat wrap.

BIG RED Harley Davidson late model Springer front endHarley Davidson 80 cubic inch evolution motor Harley Davidson 5 speed gear setHarley Davidson hand controlsCV carbK&N air filter Perf-form oil cooler & filter Vance & Hines Pro Pipe modified and ceramic coated JIMS transmission polished aluminum case5 speed kicker conversionBDL 3" belt driveAir Ride seat with on board compressorHarley Davidson police seat 23"x3.75" 60 spoke front wheel Avon Venom-R 130/60R23 tire18"x8.5" 60 spoke rear wheel Avon Venom-R 250/40R18Performance Machine chrome 4 piston rear brake caliper Harley Davidson Springer front brake 12" custom Stainless Steel Apes 250 series frame powdered coated gloss black 5 plus gallon fat bob gas tanks Paint candy red with underlying ghost flames on tank and rear fender Springer painted to match Dyna S electronic ignition Dyna S matching coilBike has title  Bike will come with complete wiring diagram along with starting instructions  Fast and Fun riding rigid, the air ride makes for a smooth ride, have other bikes that need finishing, has been my primary bike for the past 8 years, turns heads everywhere I go. Stand out and have something a bit different from the rest.Everything used to build this bike was and is qualityIf you are still reading then well you know.Happy bidding and please tell your friends Thanks and keep the shiny side up  Built and fabricated in the USA Will help with shipping arrangements 

Custom Harley Rigid Bobber- Professionally built- Kraftech frame, 80'' Evo style motor with a mild cam,Built on S@S cases and every thing else Harley OEM parts. Super E polished carb. 5 speed tranny linked to a BDL 3'' open belt.

This bike could be close to one of a kind. Want to turn some heads in the streets this is the bike for you. Want to enter it into a show this is the bike for you.

2009 custom bobber,this bike has a 96 Harley ,1200 Evo motor with Buell generation 1 heads.Harley 5 speed tranny.she's mounted on a 09 fly rite bobber frame.s&s shorty carb,mini apes,with Bidwell grips.custom 105mm anti aircraft shell for a oil tank!oil cooler, new tires.beautiful root beer paint by house of colors.fast,fun bike,call with any questions, thanks 941-380-1793

Vintage Style Modern Bobber. Street legal I am original builder/owner. This is a new build 2007.

This is a award winning bobber built by Mike Bauer and painted by Viking Cycle Art Inc.  It is Featured in the November 2011 issue of V-Twin Magazine ( No. 127) and the March 2012 Issue of Easyriders Magazine ( No.

Custom build by Dos Homdres Cycles. Paint by Viking Cycle Art. Inc.

2012 custom bobber has a S&S motor 88 ci completely rebuilt. 6 speed ultima tranny new and a ultima 3 in open belt primary new. New paint and new tires and new set of hooker pipes nice and loud.

2012 custom bobber S&S 88ci motor completely rebuilt from bottom to top. Ultima 6speed tranny new . Has a new ultima 3 in open belt primary .

You can not pass up owning this one of a kind motorcycle built by Russell Mitchell @ Exile Motorcycles. This is a beast of a bike !! $ 15,000 OBO willing to deal and all reasonable offers will be considered.  114 cubic inch TP Engineering Engine Jims Transmission with open belt primary Front and rear brakes operated by foot control Twist Clutch designed by Exile All fluids and gaskets have recently been replaced Carburetor cleaned and rebuilt New Battery

Brand New, recently finished Custom Digger bobber. Built by award winning Brass Balls Cycles. Featuring an S&S V-111 motor, Rivera 6 speed transmission and BDL primary belt drive. The chassis is 0" up and 0" out with 34 degree rake.

CUSTOM BOBBER, HIGH END BUILD, THE BADDEST BIKE AROUND. 30" CUSTOM WHEEL, AIR RIDE, CUSTOM LEATHER AND PAINT, 5 SPEED, RUNS GREAT, VERY FAST, SERIOUS BUYERS ONLY 29,900 WILL GO UP IN THE SPRING. THIS IS DIRT CHEAP AND ONLY FOR SALE BECAUSE OF MOVE.

Up for sale is this beauty! Owned for approx 3yrs now, title in hand. I just don't have time to ride  due to summer being my very busy season.

Motorcycle made in 2006. In 2016 the bike was rebuilt in the custom shop. Shipping cost included in the price.

This bike is ready to ride, it was built and test riden but never titled. Some Options: 6-speed Left side drive Tranny 200 back tire Great Stance Custom Paint Job Too much to list: Please call Kevin at 270-210-6448 for more info I am listing for him, so if you email questions I will respond with his number. Thanks for looking, happy bidding!!!

New build by Lock Jaw Customs with HAMMER Performance motor.  VERY fast VROD destroyer.  These guys only build one to two bikes a year so the attention to detail is incredible.

2006 Harley Davidson Sporster 'Bobber' Motorcycle. 1200V Twin with BUELL HEADS, Front dual disc brakes, Custom Solo Leather seat, and Satin black paint. Runs and drives great.

This bike was built before the start of the entire cookie cutter custom bikes you see out there, built by some company and they all look the same. It has an Atlas Pro Magnum Frame, to hold the horsepower this motor makes. The motor is a combo S & S and Harley motor, with all of the good stuff mixed in.