Bobber Bobber Motorcycles, page #4

2012 custom bobber S&S 88ci motor completely rebuilt from bottom to top. Ultima 6speed tranny new . Has a new ultima 3 in open belt primary .

You can not pass up owning this one of a kind motorcycle built by Russell Mitchell @ Exile Motorcycles. This is a beast of a bike !! $ 15,000 OBO willing to deal and all reasonable offers will be considered.  114 cubic inch TP Engineering Engine Jims Transmission with open belt primary Front and rear brakes operated by foot control Twist Clutch designed by Exile All fluids and gaskets have recently been replaced Carburetor cleaned and rebuilt New Battery

Brand New, recently finished Custom Digger bobber. Built by award winning Brass Balls Cycles. Featuring an S&S V-111 motor, Rivera 6 speed transmission and BDL primary belt drive. The chassis is 0" up and 0" out with 34 degree rake.

CUSTOM BOBBER, HIGH END BUILD, THE BADDEST BIKE AROUND. 30" CUSTOM WHEEL, AIR RIDE, CUSTOM LEATHER AND PAINT, 5 SPEED, RUNS GREAT, VERY FAST, SERIOUS BUYERS ONLY 29,900 WILL GO UP IN THE SPRING. THIS IS DIRT CHEAP AND ONLY FOR SALE BECAUSE OF MOVE.

Up for sale is this beauty! Owned for approx 3yrs now, title in hand. I just don't have time to ride  due to summer being my very busy season.

Motorcycle made in 2006. In 2016 the bike was rebuilt in the custom shop. Shipping cost included in the price.

This bike is ready to ride, it was built and test riden but never titled. Some Options: 6-speed Left side drive Tranny 200 back tire Great Stance Custom Paint Job Too much to list: Please call Kevin at 270-210-6448 for more info I am listing for him, so if you email questions I will respond with his number. Thanks for looking, happy bidding!!!

New build by Lock Jaw Customs with HAMMER Performance motor.  VERY fast VROD destroyer.  These guys only build one to two bikes a year so the attention to detail is incredible.

2006 Harley Davidson Sporster 'Bobber' Motorcycle. 1200V Twin with BUELL HEADS, Front dual disc brakes, Custom Solo Leather seat, and Satin black paint. Runs and drives great.

This bike was built before the start of the entire cookie cutter custom bikes you see out there, built by some company and they all look the same. It has an Atlas Pro Magnum Frame, to hold the horsepower this motor makes. The motor is a combo S & S and Harley motor, with all of the good stuff mixed in.

custom bobber.reproducation 1947 motorclear titlemouse trap clutchruns95% complete

1981 sportster custom 45 springer front endweld on hard tail

The RODS AND RIDES BT RACER is a machine inspired from the days of actual Boardtrack Racing. This machine was built for not only speed and function but for the flowing lines as you can see. The massive 23" front and rear tires gives this machine the ability to not only have a different stance than most motorcycles but offers a ride that is unreal.

 Whole shot. This is a full custom one of a kind bike built in 2013. This bike was built by KAELINS custom cycles. New S&S 89ci motor built by custom design studios in Novato CA.

This is a 2005 springer bobber. The actual name of the bike is a lil bruiser. Its made by the company Revolution.

I am selling my Old School Cool Sucker Punch Sally Shovelhead Bobber.   It is a Bar Burner with small peanut tank that has around 2 gallons capacity.    She originally sold for around $ 24,500.00 when new.

  2006 Covington Classic Custom Bobber - 88ci Evo Motor - Chrome Springer Goose Neck Front End (cost $2000) - NEWER Avon & Dunlop Wide White Wall Tires Front & Rear (cost $400) - Classic 2-Tone Green Body w/ Yellow Pinstripe (cost $1000) - RPM Forward Controls (cost $400) - BDL 3 Open Primary (cost $1000) - Baker 5 Speed Transmission (cost $800) - Chrome Front & Rear Brake Calipers (cost $400) - Green w/ White Trim Springer Solo Seat (cost $300) - Front (21) Rear (16) 80 Spoke Wheels (cost $600) - Covington Custom Exhaust (cost $500) - Old School Grips (cost $50) - Fork Bag (cost $75) - Curved Tag Bracket (cost $150) - Bullet Turn Signals (cost $50) - Stainless Steel Brake Lines (cost $100) - The bike is in great running condition, and rides well. It has been through our service department, and has been serviced and inspected. In-House Buy Here, Pay Here Financing offered & Trades Accepted.

2006 Santee Custom 110, 2006 Clean title in hand! Santee straightleg Frame features stock stretch w/ 30 degrees of rake. Crate 96" S&S motor.

Re-listed due to a non paying bidder. This in a near show quality build in showroom condition. Ridden only a few times since completion in 2014. Not ridden since.

       2012 CUSTOM BUILT BOBBER * S&S 110' MOTOR* 5 SPEED TRANSMISSION* 60 SPOKE FRONT WHEEL* SOLID ALUMINUM RER WHEEL* RIVERA OPEN BELT PRIMARY* FLAT BLACK PAINT* REAR SPROTOR* ONE OFF MEXICAN BLANKET SEAT* BUILT WITH THE BEST OF EVERYTHING LOW RESERVE

 Custom 96 Honda VLX 600 Bobber  Took no shortcuts on this build! Bid with confidence knowing you are not only getting a "badass" bike, but also a reliable one! Extremely LOW miles for the year!

This bike is simply awesome to ride. Recent service done on this bad boy.  Details are a hand tooled leather seat, Harley Davidson Controls, Harley Fatboy front end, 220 rear tire, custom metal, Ultima 6 speed, 4 inch open primary belt drive, HUUUUGE 130 inch Ultima engine that purs like a kitten.

SPORTSTER WITH WIDEGLIDE FRONT END, FAT BOY RIMS, GROUND POUNDER STRAIGHT PIPES, CARBERATOR, PEANUT FLAT BOTTOM 1970's ,MODEL GAS TANK. BLACK 16" 1.25" APE HANGERS.

2005 SURGICAL STEED BRONCO I NAMED "MOTO" WHICH IS AFRICAN FOR FIRE. BUILT BY JOHN COVINGTON WHO USED TO BE IN MAGAZINES ALOT AND OWNED THE ORIGINAL SURGICAL STEEDS. LOW MILES.

2008 Leroy Thompson Bobber named "Trendkill". This is a one of a kind, custom motorcycle. 23" front wheel with dual perimeter rotors.

Up for auction is my custom built 2009 Bobber. I purchased all of the parts during a long deployment to Iraq and assembled the bike upon my return in 2009. I live in Ohio and the bike is located at my fathers in Colorado so I have not had time to ride it and it is a shame for it to sit, hopefully someone will win and it can finally be used the way in which it was intended.

Up for sale is a freshly built Kraft Tech Rigid. I purchased the bike nearly completed and did the entire build all over again ensuring everything was done the correct way with the appropriate parts. The bike has never been titled because the previous ownership never had completed it.

2012 COMPLETE CUSTOM BOBBER 113 S&S MOTOR MOTOR IS BUILT WITH ALL S&S PARTS. S&S SUPER G CARBURETOR ULTIMA 6 SPEED TRANS ULTIMA IGNITION SYSTEM. THE BIKE WAS JUST COMPLETED IN OCTOBER 2012.

 Pro-built custom 48 Bobber

 New Harley Dealership Trade-in, No previous owner records of rebuild or maintenance. What you See is What you Get ! 2001 Harley Davidson 1200 Sportster Bobber Style  1200cc Harley Davidson carburated engine, stock Harley frame .

Selling my sweet 2006 custom victory Vegas. The back end has been cut off and a hammer backend put on to hold a 260 rear tire also have aftermarket exhaust and air breather. Bike runs super strong loud and fast.

Custom Built Bobber Motorcycle Made From A 1981 Yamaha XS 650. This Is A Brand New Build With Around 100 Miles. This Bike Is Turn Key And Ready To Ride.

One of a kind Special Construction Hardtail Old School Bobber - completed 2011. Have tons more pictures here:https://plus.google.com/photos/110483167355382798606/albums/5815749539318629361 Freddies Frames custom frame and springer front end, one off unique design. Paint by Hellbound Custom, Reno Air Race themed bike, with airspeed indicator for speedo.

CHASSIS DESIGN COMPANY 100 IN ULTIMA MOTOR 6 SPEED TRANS 200 REAR 21 IN FRONT BIKE IS FAST AND HANDLES REALLY GOOD RUNS GREAT 3 IN BDL BIKE HAS REALLY LOW MILES BEEN GARAGED FOR YEARS  

2013 just built never titled  have all mso to register at dmv   all new components  turn key //113 polished ultima engine with matching  ultima drive line // ready for spring season //only ridden locally to shows have all mso  papers to register at dmv  //6 speed  rsd // //call 585 544 9924 mike for more info //drives ez set up to ride n show too   started as a complete roller from chassis designs same guy who builds them for rooke from what im told  ///has no paint all powdercoat not one scratch or blemish on complete bike // has fancy arlen ness dual caliper rear brake set up 13in rotor special dual rotor with ultima 4 piston calipers works great you still have foot and hand brake as normal for regular two brake set ups  //so front end  is so clean //with 2 brakes still //hardluck seat// spitfire mid controls //one off exh //240 rear 21 front //harley oem battery gel //billet batterybox and kickstand  //just got back from bike there was only a few bikes w/ this detail ////starts drives like it should //have 3 mso needed to register //new components ///none used pm copy hand controls //has basic chopper wiring  with  ignition switch //on off// has button on starter to start has headlight tailight brake lites no turn signals but theres tabs onframe if desired i was riding today ez to drive about as long as my crossbones im 5ft /11 300lbs fits me well //the powder is silver w lotta flake really pops //nice clean as you can see i will help with shipping best i can local pick up ok too .//has famous nana rooke frt end //rides as nice as my crossbones //look at pics about same size //gas tank under seat has cool gas guage //oil tank under trans very clean design from chassis s designs  

Dream Machines Indian Motorcycle Visit Store 1401 N. Interstate 35 Round Rock, TX 78664 Contact: Our Sales Team! Phone: (512) 309-7503 ext.5 Email: sales@dreammachinesofaustin.com Vehicle Information VIN FLA63818 Condition Used Odometer 1 Stock No A63818 Warranty Unspecified Engine Buell Thunder Storm Transmission 5-SPEED Exterior Color Black Interior Color Flat Black Loan Calculator 2010 Custom Buell Bobber Description *AS COOL AS IT GETS* YOU ARE LOOKING AT A 2010 CUSTOM BOBBER (BIKE DOES NOT HAVE ODO OR SPEEDO SO IT WILL BE TITLED AS NOT ACTUAL MILEAGE).

I'm selling this bike for my next door neighbor, who rarely rides it since he has too many toys to play with.  I can attest to the quality of the bike and the condition and that the bike has been professionally maintained by a local shop.   Here are the specs.

you looking at a 750cc suz,bobber custom built  it has new white wall tires it starts right up and runs and drives great it is really for the road,thanks for looking and good luck bidding,,,

2011 Custom Bobber 117 Mile Gray Powder Coat 200 Wide Tire Chromoly Frame ALL TIG Welded and USA Made 34 Degrees of Rake & 4" DT Stretch 107" SMW, Inc Nat Panhead 5 Speed Nat "Kicker" RevTech Transmission 60 Spoke Chrome Wheels or optional SMW, Inc. Billet Wheels SMW, Inc. Knuckler 3 3/8" Open Belt w/ Outer Bearing Support Custom Bobber Gas Tank, 9" High-Grade Steel Rigid Rear Fender Santee Chrome Shorty Pipes Black Leather Solo Seat 16' Chrome Ape Hangers Thunder Heart Wiring Harness and Electrical Chrome Front Headlight and Tail Light assemblies SMW, Inc.

 RODS & RIDES 330 DROPSEAT BOBBER     The Dropseat Bobber is what put Rods & Rides on the map. This machine was built for not only speed and function but for the flowing lines as you can see. The massive 23" front tire and the outrageous 330mm rear gives this machine the ability to not only have a different stance than most motorcycles but offers a ride that is unreal.

 RODS & RIDES BT RACER The BT Racer is one of our #1 Selling Motorcycles for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The motorcycle is also not a little bike like so many others, it measures an whopping eight foot long and riders that are six foot plus look more fitted than any other bike in the market place.

Toll Free Number: (855)-ROD RIDE Rods & Rides is not just a brand name, its a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA.  The brand is a very well known name in the national motorcycle shows,  magazines, and several TV channels but that's not where is stops. The brand can be found in many value guides as well, one of which is KBB (Kelly Blue Book).

 RODS & RIDES MOTORCYCLE COMPANY SAINT LOUIS, MISSOURI USA SPECIAL ORDER, PLEASE ALLOW 8-10 WEEKS FOR COMPLETION RODS & RIDES 330 TRIKE CHASSIS SPRINGER FRONT END BLACK OR CHROME SPOKE WHEELS FAT BOB SPLIT TANKS TWO TONE PAINT OR MONO WITH PIN STRIPES EL BRUTO EVO ENGINE 6 SPEED TRANSMISSION DUAL 4 PISTON BRAKES 3.35" OPEN BELT DRIVE TOLL FREE: 855-ROD-RIDE

 RODS & RIDES DROPSEAT BOBBER The Dropseat Bobber is our #1 Selling Motorcycle for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The seat sits twenty inches off the ground and allows the rider the true dropseat feel.

 RODS & RIDES DROPSEAT BOBBER The Dropseat Bobber is our #1 Selling Motorcycle for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The seat sits twenty inches off the ground and allows the rider the true dropseat feel.

selling a custom bobber from billy the kid customcycles, has a 2010 missouri spec contruction title (clear) bike has maybe 2000 miles on it, transmision is out and needs repaired or relaced. has a 110 revtec exotic motor to look like a knuckle head. has a 3 inch open beltdrive that will come with it.

Toll Free Number: (855)-ROD RIDE Rods & Rides is not just a brand name, its a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA.  The brand is a very well known name in the national motorcycle shows,  magazines, and several TV channels but that's not where is stops. The brand can be found in many value guides as well, one of which is KBB (Kelly Blue Book).

  RODS & RIDES MOTORCYCLE COMPANY Saint Louis, MO USA   2014  200mm DROPSEAT  BOBBER      MSRP $29,995     TERMS OF SALE: This machine is ready to go and can be headed your way today, shipping is included or you can pick it up in person.   -200mm Paint: House Of Kolor Paint with Old School Pinstriping -Springer Front End   -Fat Spoke Wheels STD Frt. 26â€� Front W/ Whitewall and 18" Rear W/ 200mm Tire   -28 Ford LED Taillight    -Leather Seat Hand Made By World Famous Rich Phillips   -Murdered Package (Includes, Rocker Boxes, Headlight, Taillight, and primary drive)   -2 1/2" RR Exhaust W/ Black Wrap   -Engine: Ultima El Bruto Compition 140â€� 2305cc 175HP   -6 Speed LSD Transmission Black W/ Hydraulic Clutch - 12â€� Ape Hanger Style Bars Color Matching   -Primary 2â€� BDL With Outer Cover Contrast Cut -JB Quad Front Brake System All motorcycles carry a 1 year/unlimited millage parts warranty.

       Rods & Rides Motorcycle Company This sale is for a new 23" Boardtrack Racer Motorcycle order. The order will be ready for delivery within 6-8 weeks.  The motorcycle can be either delivered at our facility or shipped anywhere within the United States for $595.00 We are the only Drop Seat Bobber manufacturer licensed in all 50 states including New Jersey. We are also able to export to Canada and we are on the Australian registry.

       Rods & Rides Motorcycle Company This sale is for a new 300mm Drop Seat Bobber Motorcycle rolling chassis.  The frame can be either delivered at our facility or shipped anywhere.  (Wheels in pictures are available at extra cost) " SALE INCLUDES " - 300mm Dropseat Frame - Oil Tank W/ Cap - Rear Axle - Battery Box - Seat Mount - Rear Fender (Mounted) - Chrome or Black Springer Front End - Mini Ape Hanger Handlebars - Handlebar Risors - Traditional 60 Spoke Wheels (Chrome)  - 90/90-21 Avon Tire & 300/35-18 Avon Tires - Peanut Fuel Tank (Mounted) - License Plate / Taillight Mount - Forward Control Foot Mounts - Certificate Of Origin & 17 Digit VIN Stamped  **Please Read**Don't be fooled by other frames & chassis online, this is a complete chassis ready to go the the painter with no additional welding or fabrication needed.  VISA / MC  ACCEPTED To discuss details please call Rods & Rides By TD, LLC.   (855) ROD-RIDE T.D. Ward (314)-393-2123 Cell Picture of completed bike with this frame.

RODS & RIDES MOTORCYCLE COMPANY The FuKentrike is one of the wildest creations from Rods & Rides Motorcycle Company. The trike features the same performance and the same quality as the rest of the line up we build. As always the Ultima Performance El Bruto series engine is what the trike is built around. This engine produces 110 HP at the rear wheels.

 RODS & RIDES MOTORCYCLE COMPANY - R O L L I N G  C H A S S I S - This auction / sale is for a complete bike minus Engine, Exhaust, Transmission, and Primary. That means, everything else is ready to go... Painted, Lights, Foot & Hand Controls, Bars, Brakes, ETC SALE DOES NOT INCLUDE DRIVETRAIN CAN BE SOLD COMPLETE, CALL FOR DETAILS The "Anarchy Bobber" is a newest model and features some of the most advanced technology we have offered in the Drop Seat Bobber line up.

  RODS & RIDES MOTORCYCLE COMPANY Saint Louis, MO USA   2014  DROPSEAT  BOBBER      ~SPOOKY HALLOWEEN SALE, ONE WEEK ONLY~ Oct 9th - Oct 16th   MSRP $24,995  SALE $19,995 SHIPPED TO YOUR DOOR  S a v e   $ 5 , 0 0 0. 0 0   TERMS OF SALE: This sale is for an order, please allow 6-8 weeks for complete build time.  The choices are yours for the following equipment options.   -300mm Paint: Mono Color Choice (Add $495 for Candy Colors, $995 for flames, and $195 for Pinstriping)   -Springer Frt End: Satin Black or Chrome (Add $495 for gloss or any other color)   -Chrome Spoke Wheels STD Frt.

       Rods & Rides Motorcycle Company This sale is for a new 330mm Drop Seat Bobber Motorcycle order. The order will be ready for delivery within 4-6 weeks.  The motorcycle can be either delivered at our facility or shipped anywhere within the United States for $725.00 We are the only Drop Seat Bobber manufacturer licensed in all 50 states including New Jersey. We are also able to export to Canada and we are on the Australian registry.

Weldritecustoms.com  built ..It has custom drag style bars with built in tach ,setting on a 2011 wide glide front end  It has beeen lowered 2 inches...The lower legs are powder coated .Paucho style gas tank with satin black powder coating..The frame is a ridged  with built in oil tank thats welded in the frame Frame is powder coated as well.. Ostrich skin seat sitting on a mono shock thats adjustable .The wireing is completely new  under the seat pan lid  witch oil tank fill cap is mounted into with temp gauge  One off tail light mount  engine is fresh This bike is Fast and fun to ride  very well built bike..Will be in common trends magazine in the near furture and another larger name mag ..Custom exhaust  its a 2n1 madfe out of 2.1/4 16 gauge pipe thats ceramic coated inside and out ..someone is going to get a real nice head turning bike that can be rode like they are ment to be!!!    Tanks and good luck!!

 2010 Indian Larry Tribute Bobber: PYROMANIAC Hand built custom which took over 820 man hours. Built on frame #17 of the legendary “twisted down tubeâ€� frames built by Indian Larry. Only 1 mile!

Covington’s Cycle City 2008 Covington Custom Bobber 1st Titled in Texas 10/20/2014 Built by the legendary Jerry Covington! This is one of the most beautiful and detailed motorcycle I have ever seen, let alone owned. The history as best I can, and based on conversations with Jeff Covington himself is as follows: • Sold in 2011 at Daytona Bike Week to local TX collector.

DYNO TUNED (WITH DYNO SHEET) ULTIMA EL BRUTO ENGINE I JUST GOT IT OUT OF THE SHOP A FEW DAYS AGO 2500$ WORTH OF WORK DONE IT IS AN ABSOLUTE MONSTER NEW TIRES NEW FORWARD CONTROLS NEW NEW LITHIUM ION BATT AND BATT BOX CARB JUST CLEANED NEW OIL NEW FRONT AND REAR ROTORS NEW CHAIN THIS BIKE HAS NOT EVEN BEEN RIDDEN YET ON THE STREET SINCE BEING BUILT ITS BASICALLY BRAND NEW

I am a private builder from Sarasota FL. I have 5 class wins at Thunder on the Bay Sarasota FL,5 class wins at The Boardwalk show Daytona FL, 3 class wins at Florida Bike Builder's Expo,3 class wins at the Rat's hole, 6 Bike's in Barnett's online magazine and have a bike on the cover of April's 2016 of Easyrider's & V-Twin Magazine, The reason I say these thing's is to let you know this is not my first rodeo.Now about the bike.This bike is all ready a proven winner and is very rideable it was a 1993 883 that has a 1200 kit in it.It is a ground up split case build 1200 kit,valve job,S&S Super B,Points. All the outer case,s are powder coated as well is the frame and front end.

Just completed 1993 89c.i. EVO sporty.89 inch S&S Big bore kit (flywheels,rod's,piston's,cylinders,adjustable pushrod's).Andrew's cam's,Crane Ing,S&S E carb.Motor is set in a candy red powder coated Krafttech frame with a DNA springer ,Invader wheels(These wheels are not Knock off's) with new Avon Cobra tires. The rear has a DNA sprotor set up the front is a spool.(N0 front brake) Cole Foster Salinas Boyz Fuel tank,Krafttech oil tank.The pipe's are Bassani sweeper's.The bike has a new H-D stator,CCI regulator and a new sealed H-D battery.The title match's motor with m.s.o. for the frame.This was a split case build from the ground up with nothing left untouched.