Find or Sell Motorcycles & Scooters in USA
  • 1978 Suzuki PE1751978 Suzuki PE175 (1978)
    1978 Suzuki PE175(C).This PE is 100 % stock and original with the exception of a couple of small things that being (the Pro Taper grips,Uni Air Filter and Tusk hand guards)Bike had been sitting in the cellar for a while so I decided to get it running for my son to ride who is 18.The bike has had many parts changed with ALL FACTORY oem Suzuki parts.Fresh gas and carb cleaning with a new plug and she fired right up.I went a little beyond that.I put fresh gas with Golden Spectro,new NGK plug,Suzuki 10W40 oil,Suzuki Tank Stickers,New UNI air filter(along with PJ1 Foam Filter oil),Front & Rear brake shoes,Front & Rear Tires(Keep in mind rear tire has been changed since picture) and Tubes(IRC),Swingarm bearings and spacers-with new grease fitting and grease,Chain & Sprockets,Front sprocket spacer,oring,seal,washer,Tusk hand Guards,Headlight bulb,Magneto cover gasket,Clutch drive plates,Clutch driven plates,Clutch cover gasket(again all OEM Suzuki),Gas tank strap,Fuel-pet cock,Carb float bowl gasket,Float,Needle & seat Assembly,Pilot jet,Main jet,Front Wheel bearings,Rear Wheel bearings,I will add more as soon as I remember.The bike is at a point where you can ride it,which it is being ridden easily right now or take it to the next point and make it just a piece in your collection.Doesnt need much to get there.I mean isnt mint but it`s probably one of the nicest PE`S out there.This bike still has the ORIGINAL spark plug tool that comes with the bike and is held on with the Black rubber band to the triple clamp(how many times have you seen that),Exhaust pipe and Spark arrestor are dent free,trip meter,high/low beam switch and kill switch all work fine.Im 51 and grew up riding on PE`s.Great machines.Front fender it faded(rear fender still looks nice),Fork boots have a couple of little-nothing slices,side covers OEM believe it or not are still available,seat cover.      Break it completely down,wash and paint whats needed-which is not much,re-assemble-park it and look at it.Those are the things I would finish this bike off with if I wasnt going to ride it anymore.But fork boots and seat cover arent to bad after 40 years.I DO HAVE PAPERWORK WITH THE BIKE. 
    2016-12-04 04:38:50
    Coventry, Rhode Island, United States

Suzuki PE175 Price Analytics

Moto blog

Suzuki has prepared a touring version of the V-Strom, the 1050XT Tour

Fri, 11 Dec 2020

Suzuki has expanded its lineup by simply adding three black-painted aluminum panniers to the older V-Strom. The resulting "V-Strom" package has acquired its own name: Suzuki V-Strom 1050XT Tour. The total volume of the top and both side cases is 112 liters.

Suzuki GSX-R1000 Sportbike Gets New VVT System

Tue, 29 Jan 2019

Suzuki has adopted the SR-VVT (Suzuki Racing Variable Valve Timing) system on the 2017 GSX-R1000. A centrifugal drive system is integrated into the intake gear and adjacent guide plate. It features 12 steel balls and slant grooves to rotate and synchronize the intake valve at a predetermined RPM for increased power at high RPMs.

Goodbye Hyperbike: Suzuki Ends Hayabusa Production

Thu, 27 Dec 2018

The legendary beast goes down in history after twenty years of dominating the highways, dragstrips and the earth's surface in general. The hyperbike is being discontinued due to non-compliance with the Euro-4 environmental standard, but its story does not end there. The company is clearly preparing its successor, as indicated by the renewal of the Hayabusa trademarks.

Suzuki unveils long-range V-Strom 1000XT Adventure

Sun, 21 Oct 2018

Adventure is based on the 1000XT, a top-of-the-range 1037cc V-twin with 99 hp. and spoked wheels and differs from it in additional equipment. The set includes 37-litre aluminum saddlebags, a center stand, heated grips, roll bars and a distinctive blue-silver-white paint job.

Turbobike Suzuki: Details!

Sun, 03 Jun 2018

A new patent image reveals something new about the serialization of the Recursion concept. As we already know, the Hamamatsu company is preparing a commercial version of the Recursion show bike and its main feature will be a 700cc turbocharged inline two-cylinder engine, which is distinguished by powerful traction in a wide rev range. But on the way to the assembly line, the device will noticeably change, as hinted at by patent images.

Suzuki has updated the GSX-S1000 and GSX-S1000F

Sun, 19 Feb 2017

The GSX-S1000 street fighter, based on the 2005 Suzuki GSX-R1000 K5 sportbike engine, and its faired F-version came out two years ago. This spectacular couple began the new year of 2017 with updates. The rider will certainly notice the presence of a new clutch with reverse slip, providing smoother downshifts!

Suzuki announces new Hayabusa hyperbike generation

Wed, 09 Nov 2016

The "supersonic" Hayabusa is one of the eternal values ​​​​of the Suzuki brand. The bike has been produced since 1999 and is clearly not going to rest - the new "Busa" will take into account the disadvantages of modern motorcycles and get smarter. The company President Toshihiro Suzuki stirred up the public, saying that the new motorcycle will appear at the end of next year.

"Gixer’s" New Clothes

Fri, 26 Aug 2016

Instead of announcing models for 2017, Suzuki has unveiled a special edition of two of its bestselling models, the GSX-S1000 and GSX-S1000F. The GSX-S1000 Carbon Edition is available in black, blue, and red, with some elements finished in yellow fluorescent paint. The bike is fitted with body-coloured Brembo monoblock calipers, as well as carbon crankcase covers and fender liner.

New cross-country Suzuki 2017 bikes

Wed, 27 Jul 2016

Suzuki has released detailed information about the 2017 RM-Z450 and RM-Z250 motocross models. The main innovation of the whole series was the coloring. The colors of some plastic elements have changed, the Excel aluminum rims have become black.

In loving memory of the Suzuki Katana

Wed, 23 Mar 2016

The Japanese are celebrating the 35th anniversary of the legendary Suzuki Katana motorcycle, whose appearance on the road still stuns the layman. Back in the day, the Japanese manufacturer relied on the European design studio Target Design to get an innovative motorcycle. Hans Muth, the ex-BMW designer at the time, presented two concepts: a 650cc prototype and a 1100cc version that ended up on the assembly line.