Motorcycles in Utah

This is the Rotor for the 8-pole stator on GY6 125/150cc engines. These rotors are available in either 6, 8 and 11-pole. These stator generators/rotors are found on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others.

This is a Non-EGR, 52mm Big bore Cylinder Head Assembly with the head, valves, springs, studs, seals and seat, already installed for the 125cc upgrade kit.  This has the standard size intake and exhaust valves.  This head is the minimum required to do the 100cc upgrade to the GY6-50 engine.  This head fits the 125cc kit on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Tomos Nitro 50, Vento, VIP and many others.. Check out my other items! Be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

These are High Quality 50mm Taiwanese Piston Rings for our GY6 100cc Big Bore Kits used in the GY6 50cc scooters, quads, ATVs, and buggies with Chinese engines. These fit many brands such as Jonway, JMstar, Roketa, Sunl, Tank, TGB, TNG, Vento, VIP and many more. Measurements: 2 Rings: .98mm 2 Rings: .41mm Oil Ring: 1.77mm Mechanics Note:These rings are better than the original and will last and perform better.

Belt Cover, Black,  (Long Case Type C), Left Crankcase Cover, measures 18.25 inches, GY6-50, 139QMB, (10 bolt) with 729 belt.   Please read the Mechanics Note below to determine which one you need. Mechanics Note: These covers come in both short case and long case.

 Belt Cover, Black, (Long Case), Left CVT Cover, GY6-125/150, QMI152/157 and QMJ152/157 engines. Overall length 19", fits Baja,  Boreem (BMS), Matrix 150, Roketa, SUNL, Tank, United Motors, Vento Check out my other items! Be sure to add me to your favorites list!

Wrist Pin Needle Bearing, 12mm, for the 1E40QMB 1PE40QMB 2 Stroke Minarelli JOG engine with the larger piston rod bearing like Vento Triton and other brands. Measurements: I/D: 12.27mm 11 Rollers O/D on the Bearings: 15.45mm O/D on the Frame End: 15.8mm Length: 12.69mm  Check out my other items and please be sure to add me to your favorites list! Sign up for my email newsletters by adding my eBay Store to your Favorites!

 This is a complete 57.4mm Non-EGR replacement Cylinder Head for the GY6-125/150cc 152QMI 152QMJ 157QMI 157QMJ engine.  This includes the head with fully installed seals, seats, springs, studs and moly coated valves.  The head bolts measure 54mm center to center, square. This head fits the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Tomos Nitro 50, Vento, VIP and many others.. Check out my other items!

This is a Complete OEM replacement Engine Gasket Set for the stock Long Case (10 bolt belt cover) 39mm 4 stroke GY6 50cc, 139QMB engine. This complete gasket set fits the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.

This is a 6-pin AC Racing Performance CDI with an Unrestricted Rev Limit and an advanced timing curve for the GY6 50cc 125cc and 150cc engines. Engine applications include the 139QMB, 152QMI, 152QMJ, 157QMI, and 157QMJ.  These CDI's have no governor and eliminate that irritating rev-limiter which might be keeping your engine speed restricted. See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.    This CDI is similar to our orange performance CDI but has a more aggressive ignition advance curve.

This is a High Quality Gates PowerLink Belt for the GY6 50cc 139QMB long case engine. This belt fits Baja, JMstar, Jonway, KYMCO Agility 50, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. Note: Scooters with a long case usually have a 12" - 16" rear wheel.

This is a quality Cylinder Top End Rebuild Kit for the Left Side on a Yamaha XV250 2V49FMM engine. This excellent kit includes the Cir-clips, Cylinder, Base Cylinder Gasket, Head Gasket, 49mm Piston, Rings, and 13mm Wrist Pin. This Cylinder Rebuild Kit fits the Diamo Cruiser 250, Keeway Cruiser 250, Keeway Dorado 250, Keeway Supershadow 250, Kingring JL250V, Lifan LF250V, Roketa Vado 250, Vento Colt 250, Vento V-thunder 250, Yamaha XV250 and many others....

 Butch Cassidy The Congenial Desperado by Herb Walker, Baxter Lane Company, copyright 1975.  64 numbered pages, illustrated.

This is a very common regulator rectifier for Chinese made vehicles. It has a 4-prong rectangular connector for the GY6 and Honda Trail style Horizontal engines. This regulator is for the 4 stroke Chinese engines.

This is a quality 18mm CV replacement Carburetor for all GY6 4-stroke 139QMB 49/50cc Chinese engines. This is better than stock and comes with a larger venturi, and quality construction. This carburetor is used on Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. Mechanic Note: This better than stock carburetor comes with an accelerator pump, which will frequently eliminate hesitation when you open her up.

This is the OEM replacement belt for the GY6 50cc 139QMB 4-stroke long case engine for Chinese scooters, ATV's & Go-karts.  Scooters with a long case usually have a 12" - 16" rear wheel.  See attached photo labeled "Deciphering Chinese Engines Codes" for clarification in determining your engine type.   These are used on Baja, JMstar, Jonway, KYMCO Agility 50, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. Check out my other items and be sure to add me to your favorites list!

This is a ready to install OEM complete Clutch Assembly for the 4 stroke GY6 150cc 157QMJ Chinese scooter, moped, ATV and go-kart engines Clutch Pulley Sheaves Housing Assembly  Clutch Springs Torque Spring This clutch fits Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others..  Be sure to add me to your favorites list! Please visit my eBay Store http://stores.ebay.com/fastchinaparts95!

3 Studs from the Tampa Bay Buccs.2015 Panini Black Gold "Franchise Gold" and is serial numbered 065/199.BGS graded a 8.5 (NM-MT+)...which is hard to get anything over an 8 in Black Gold! You are bidding on the exact card in the photo(s).  Shipping cost includes: card in sleeve, top loader, rigid piece of cardboard to prevent damage from USPS, sealed team bag, tape to ensure it stays sealed, bubble envelope/package and postage fees.   Combined shipping fees are 50 cents for each additional card.

DESPERADO 3.8" BLACK 1/2" OFFSET 17MM WHEELS

KUHL DESPERADO COTTON/SPANDEX OUTDOOR HIKING CLIMBING PANTS SZ 36 X 30 Description Excellent used condition. Size 36 - Inseam is 30. Waist flat is 18" Payment Payment must be made by PayPal after auction ends.

This is a beta video tape and in very good condition. Selling AS IS.

Desperado 2.2" Black Front Or Rear Wheels (2) For 1:16 E-revo

Sling Shot 2.2" Sand Tires Mounted On Desperado Wheels - 2 - For 1/16 E-revo Front/rear

Badlands 2.8" All Terrain Tires Mounted On Desperado Black Rear Wheels

Masher 2.8" All Terrain Tires Mounted On Desperado Black Rear Wheels (2)

Big Joe Ii 2.2 All Terrain Tires Mounted On Desperado Wheels (2) For 1:16 Summit And Savage Xs Flux

Desperado Bead Loc Black/Black Wheel

Trencher 3.8" All Terrain Tire Mounted On Desperado Black Wheels

Badlands 2.8" All Terrain Tires Mounted On Desperado Black Wheels

Desperado 2.8" Black Wheels (2)

Desperado 2.8" Black Rear Wheels (2)

BADLANDS 3.8" ALL TERRAIN TIRE MNTD ON DESPERADO BLACK WHEELS

ATK, Rear Shock, KTMHusaberg WP SuspensionMotorcycle Shock Item #: 4681-1 WP 4681 Rear Shock Manufactured:  1994 Condition:  Used Country of Manufacture:  Holland Manuals and Technical Information:  YES Spare Parts Available:  YES The spring rating: 50-200 Distance center to center of mounting holes:  15.5 in (400m)  Original Price:  $665 Buy It Now Price:  $195

1973 Hodaka 100 (Dirt Squirt) Front Wheel Axle Up for sale is the front wheel axle from a 1973 Hodaka 100 (Dirt Squirt) motorcycle. This front wheel axle is very dirty and was pulled right off the bike. It is 40 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1969 Hodaka 100 Model 92 (ACE) Front Brake Hub Up for sale is the front brake hub from a 1969 Hodaka 100 Model 92 (ACE) motorcycle *. This front brake hub is very dirty and was pulled right off the bike. It is 44 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

PARTS IN THIS LISTING ARE FROM: 1976 HODAKA WOMBAT 125 (03) YOU ARE BIDDING ON: CLUTCH BASKET DISC ASSEMBLY CONDITION: GOOD USED SHAPE. SEE PICTURES. COMES AS SHOWN.

1974 Hodaka 100 (Dirt Squirt) Swing Arm Axle Up for sale is the swing arm axle from a 1974 Hodaka 100 (Dirt Squirt) motorcycle *. This swing arm axle is very dirty and was pulled right off the bike. It is 39 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1974 Hodaka 100 (Dirt Squirt) Front Wheel Axle Up for sale is the front wheel axle from a 1974 Hodaka 100 (Dirt Squirt) motorcycle *. This front wheel axle is very dirty and was pulled right off the bike. It is 39 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1974 Hodaka 100 (Dirt Squirt) Rear Brake Pedal Up for sale is the rear brake pedal from a 1974 Hodaka 100 (Dirt Squirt) motorcycle *. This rear brake pedal is very dirty and was pulled right off the bike. It is 39 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1969 Hodaka 100 Model 92 (ACE) Speedometer Drive Gear Up for sale is the speedometer drive gear from a 1969 Hodaka 100 Model 92 (ACE) motorcycle *. This speedometer drive gear is very dirty and was pulled right off the bike. It is 44 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1973 Hodaka 100 (Dirt Squirt) Oil Dip Stick Up for sale is the oil dip stick from a 1973 Hodaka 100 (Dirt Squirt) motorcycle. This oil dip stick is very dirty and was pulled right off the bike. It is 40 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

 WARP 9 FRONT & REAR RIM SET 19x2.15 36 Hole Rear & 21x1.60 36 Hole Front - Blue -Fitment- All Kawasaki, KTM, Suzuki, Yamaha, Husqvarna, & Husaberg with the same size/spoke holes as listed above NOTE: These rims are a standard Japanese lace pattern so will fit all models that use the same size and spoke hole count. If in question please email or call us at 801-269-8333.  Color availability varies from time to time and some colors are anodized to order so please don't hesitate to contact us BEFORE purchasing for a time frame.

PARTS IN THIS LISTING ARE FROM: 1973 HODAKA COMBAT WOMBAT 125 MODEL 95 YOU ARE BIDDING ON: FRONT FENDER BRACKET CONDITION:  DOES NOT APPEAR BENT. MOUNTS GOOD. HAS PITTING INFO ABOUT THE BIKE IT WAS TAKEN OFF OF.

1972 Hodaka 125 (Wombat) Front Wheel Axle Up for sale is the front wheel axle from a 1972 Hodaka 125 (Wombat) motorcycle. This front wheel axle is very dirty and was pulled right off the bike. It is 38 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1974 Hodaka 100 (Dirt Squirt) Front Brake Hub Up for sale is the front brake hub from a 1974 Hodaka 100 (Dirt Squirt) motorcycle *. This front brake hub is very dirty and was pulled right off the bike. It is 39 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

PARTS IN THIS LISTING ARE FROM: 1976 HODAKA WOMBAT 125 (03) YOU ARE BIDDING ON: CRANKSHAFT CONDITION: SPINS FREE. NO UP & DOWN PLAY. BOTH ENDS ARE GOOD.

1969 Hodaka 100 Model 92 (ACE) Front Wheel Axle Up for sale is the front wheel axle from a 1969 Hodaka 100 Model 92 (ACE) motorcycle *. This front wheel axle is very dirty and was pulled right off the bike. It is 44 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1973 Hodaka 100 (Dirt Squirt) Rear Brake Hub Up for sale is the rear brake hub from a 1973 Hodaka 100 (Dirt Squirt) motorcycle. This rear brake hub is very dirty and was pulled right off the bike. It is 40 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1973 Hodaka 100 (Dirt Squirt) Rear Brake Stay Bar Up for sale is the rear brake stay bar from a 1973 Hodaka 100 (Dirt Squirt) motorcycle. This rear brake stay bar is very dirty and was pulled right off the bike. It is 40 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1972 Hodaka 125 (Wombat) Rear Brake Pedal Up for sale is the rear brake pedal from a 1972 Hodaka 125 (Wombat) motorcycle. This rear brake pedal is very dirty and was pulled right off the bike. It is 38 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1974 Hodaka 100 (Dirt Squirt) Rear Wheel Axle Up for sale is the rear wheel axle from a 1974 Hodaka 100 (Dirt Squirt) motorcycle *. This rear wheel axle is very dirty and was pulled right off the bike. It is 39 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

This part came off of 64-67 Hodaka Ace 90 (frame# A4246). What was left of the bike was abandoned in a field outside of Moab utah for a long time. For condition, please look closely at the pictures as I try to take detailed photos so that you know what you are buying.

motohillclimber Store 1976 Hodaka Wombat 125 sprocket dampener,in good working condition  Check out my other  items! I do combine shipping on mutiple items.               International buyers please ask for a shipping quote.                   On Jul-05-14 at 22:08:34 PDT, seller added the following information: Your own return desk 24/7 Powered By PhiConnect.com

1972 Hodaka 125 (Wombat) Headlight Mounts Up for sale are the headlight mounts from a 1972 Hodaka 125 (Wombat) motorcycle. These headlight mounts are very dirty and were pulled right off the bike. They are 38 years old and obviously not perfect but should clean up and still be good replacements for the right person.

1974 Hodaka 100 (Dirt Squirt) Rear Brake Rod Up for sale is the rear brake rod from a 1974 Hodaka 100 (Dirt Squirt) motorcycle *. This rear brake rod is very dirty and was pulled right off the bike. It is 39 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1969 Hodaka 100 Model 92 (ACE) Rear Brake Rod Up for sale is the rear brake rod from a 1969 Hodaka 100 Model 92 (ACE) motorcycle *. This rear brake rod is very dirty and was pulled right off the bike. It is 44 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

1974 Hodaka 100 (Dirt Squirt) Front Fender Bracket Up for sale is the front fender bracket from a 1974 Hodaka 100 (Dirt Squirt) motorcycle *. This front fender bracket is very dirty and was pulled right off the bike. It is 39 years old and obviously not perfect but should clean up and still be a good replacement for the right person.

Hodaka Ace 90 rear mud protector.  In good condition, all of the snaps are good, none are broken.  OEM Please remember that the motorcycle parts are used, most are vintage and will have wear associated with them.

PARTS IN THIS LISTING ARE FROM: 1973 HODAKA COMBAT WOMBAT 125 MODEL 95 YOU ARE BIDDING ON:  GAS CAP CONDITION: NO CRACKS OR DAMAGE. THREADS GOOD. INFO ABOUT THE BIKE IT WAS TAKEN OFF OF.