Pro Street Pro Street Motorcycles, page #2

PAUGCO FAT BOY FRAME, 55 mm MEAN STREET INVERTED FRONT FORKS, NESS HEADLITE, 1340 EVO BIG BORE, S&S CARB WITH POWER VALVE, 2"CUSTOM EXH, WIDE BDL OPEN BELT DRIVE, FINAL BELT DRIVE, THE BEST IN CONTROLS AND CHROME ALOT OF BLING. THIS ADJUSTABLE SOFT TAIL RIDES NICE AND PULLS LIKE A FREIGHT TRAIN WITH A VERY NICE SOUND AND THUMP TO HER. THE PAINT IS VERY GOOD, THE BLACK WITH BLUE AND GREEN GHOST FLAMES REALLY POP IN THE SUN LIGHT.

2000 Softail “STINGRAY”.  I am the builder and only owner of this bike.  Special Construction, starts on a dime and will rip you off the seat if you're not holding on. Custom marbled paint including frame and matching swing arm.

Pro-Street V8 motorcycle with polished hi-rise tunnel ram and (2) 600 Holley carbs. Original manufacturer was a "American King V" in Baton Rouge, LA. 350 Chevy motor with approx. 3,800 miles.

2001 DONNIE SMITH CUSTOM CUSTOM Top Line Information Year: 2001 VIN: MVIN206691IND Make: DONNIE SMITH CUSTOM Stock: A1118 Model/Trim: CUSTOM Condition: Pre-Owned Engine: 0 cc Exterior: Purple Mileage: 5,246 Additional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * * Phone: (630)425-3237 Alt: (630)624-8303 DescriptionDONNIE SMITH CUSTOM!! DONNIE SMITH CUSTOM S&S MOTOR HYPERFORMANCE BIG JUGS 5-SPEED TRANS ONLY 5246 MILES!! PM CALIPERS CUSTOM 2 UP SEATS JOKER MACHINE CONTROLS OPEN BELT PRIMARY CUSTOM SKULL AIR BRUSHING   At our dealership we work very hard to accurately describe our vehicles through text descriptions and elaborate photos.

2001 confederate Hellcat,  Now a 240R,  Built by the largest and Best G1 Confederate Dealer in Cali.. Just Sold the Red 120 Merch America GT,  This is Lowest Milage and Last Collector Bike That I have Left, BEST EXAMPLE of a Hellcat in USA, Only listing One (1) Time, AND a "one (1) year Warranty Included", "IF Bike Meets FIRST Reserve",  A 12 Month LIMITED Warranty, With FREE Delivery UP to 300 Miles, IS Included in the SALES PRICE (Above is Null and Void if Reserve Price is lowered during Auction), Please, Please please have all the funds ready prior to placing a Bid, This Bike Sold New for Over 54K, AND If you have Questions (after reading the entire add) Please Ask during First Four Days of the Auction ONLY, For 55 Pictures "Large and Clear Pictures", of this Beautiful Bike, Go to my Photobucket Link: http://s875.photobucket.com/user/irondoor19/media/2001Black240R/2000Black240R001.jpg.html?sort=3&o=0 LOWEST MILEAGE G1 Available ON EBAY, AND Best Condition,  Better Than New, Only a handful Made (6-8),  THE 240R Hellcat Versus Standard Production Hellcat:  Hellcat Comes w 17" Front & Rear Wheels (17" x 3.5" Front, 17" X 6" 200 MM Rear), 240R has A Wider Swing Arm, Drive Gear / Housing for the Larger Rear Rim and Tire, Standard ISR Brake Package and Bars replaced with the PM Rotors, Brakes & Controls, HD Seat, has been replaced with a Custom "Carbon Fiber" Gun Fighter Seat, ONLY a handful were Made (6 - 8).  I guarantee you will never see another One (1) unless you see one of mine, Turn Signals Upgraded to RED Led Bullet Style, More Ground Clearance than Stock Hellcat Comfortable,  Bars,  Headlight & Digital Display Changed to Upgrade the Entire package..... 113 CU In S&S,  1853 CC,  118 HP,  126 FT LBS, Pulls like a Train,  The Finest 240R Ever Made, Custom Gloss Black Paint,  1 of 1,  Custom Hand Painted Hellcat Logo and Lettering ON CF tank, 18" X 3.5 Performance Machine Front Wheel And 18" X 8" (240 MM) Rear Wheel with Matching PM Brakes Front & Rear,  PM Rotors and Controls, Auto Meter Gauges on Carlini Drag Bars, With Custom Diamond Mirrors, Auto Meter Gauge Package, Custom Cushy Forward Controls, Custom Billet High Intenstity Aluminum Headlight,  Custom Red LED Bullet Turn Signals, Solid Carbon Fiber Tank (Just Relined),  Light Weight Carbon Fiber (or Fiberglass) Fenders All Parts are Fully Polished,  Billet Aluminum or SS parts,  All aluminum Primary Housing, All Aluminum S&S 5 Speed Gearbox (Andrews Gear Set) Indestructible, & Very Lightweight, Primo Rivera Belt Drive Primary W Gates Belt,  Including a Long lasting Primo Clutch Pack, Pailoi 46 MM Inverted Front Forks with Compression & rebound adjustments, Sport Bike Works Performance Custom Rear Shocks,  Comfortable,  Soft Ride (Big 240MM) 3" Chrome Moly Backbone Frame making for a Super Rigid Platform,  NO Flex, With Oil In the Frame,  5-1/2 Quarts Maximum for a cooler Running Motor, Not a Ding or a Scratch,  Stored in a climate Controlled Office for Over Ten Years, NO Modifications or Item Alterations to this Custom Bike were Done by Me or Anyone Else, It looks Like it Did as I Purchased IT,  Other than Relining the Carbon Fiber Tank 510 LBS Dry,  Will smoke any Harley or all Sport Bikes (light to Light) Except a Busa, Final Cleaning, Battery,  Oil and Gas will be installed 2 Days Before Delivery or Pickup, I will help load the bike for your Freight Carrier,  Door to Door Delivery is available for 1.00 Per Mile Via Map Quest (in One Direction, Up to 650 Miles, IE: 550 Miles Less 300 Allowance = 250.00 Additional).

2001 softail custom, 131 cubic inch ultima engine with about 800 miles on it. 6 speed tranny, brand new clutch and chain drive system. Good rubber all around the rear tire is a 140mm.

2001 Pro Street Custom Pro -1 chassis and front end, S&S 113, Jim’s 6 spd with overdrive, PM rims, brakes, rotors and calipers,  Avon tires, RB Racing exhaust BDL belt drive, custom paint.  $10,000  Call 631-774-6306

For sale is a Custom Built Harley Davidson like no other. It started life as a stock 2001 Dyna Super Glide Sport (FXDX). It resembles the original only in style and somewhat in looks retaining the original sheet metal, paint job, spoke rims, and frame.

True Custom Pro Street Softail Harley.  S&S engine.  Joker wrapped pipes.

No time to ride since opening a business after my second retirement and now my wife wants a divorce!  I have another custom plus a bagger and have thought about selling this one for several years until I ride it!  Didn't need to sell...Now I need to sell...opened another business three years ago and the bike hasn't been ridden in almost two years, but has been kept in a heated garage and on a battery tender.  This bike is insured for $55k.    My problems are you opportunities! I have an enclosed trailer and would be willing to deliver for expenses of going and coming within 500 miles.

2001 Ultra Fat Piunder with 3500 org. Miles bike has a 113" polished S&S motor and trans 5 speed taking best offer must sell ASAP

UMC Titanium 2001113 cui S&S motorJim's 5 Speed TransmissionThis bike runs great!  It is very quick, and has always been very good on gas! Especially with the performance it has!This is a  12 year old bike and does have a paint chip or two from road debris and has the small scuff on the rear fender. To be completely honest about the mechanics of the bike it could use a new throttle cable and a front head gasket, but neither effect the running of the bike.

2001 Custom Built Motorcycle.  All Good Parts.  Performance Machine calipers, American Wire Wheels 80 spoke rear 100 spoke front, Hurst Controls, Avon Tires, Subaki Chain, All Balls Starter, 100 CI Revtech Motor, Whimmer Intake.  Very, Very Clean...Won't be disappointed!!  Perfect Bike! Any further questions or more details about bike, best to call me (Nick) on my cell 269-767-1210.  Thanks and happy bidding:)

 2001 Pro Street  120 Merch Stage II  Baker 5sp, Legends air suspension  Karata 3" belt drive  Runs Strong Very Well Maintained  954-410-0289 Frank

Special construction harley for sale.  This is a very nice bike built with some of the best components. -Santee frame-Legend air ride-Corbin seat-Performance Machine wheels, brake rotors/ calipers, hand controls and passenger pegs-Accutronics forward controls-21" front wheel 18"x180 rear-BDL open primary-S&S 100" engine just rebuilt...

                     "THE GRINCH"                       2001 CUSTOM  ROLLING THUNDER / ARLEN NESS PROSTREET SOFTAIL       ROLLING THUNDER PROSTREET SOFTAIL 250 FRAME TP SHOW POLISHED 116" MOTOR SHOW POLISHED 5 SPEED TRANSMISSION 2 1/2 CLOSED, DRY PRIMARY DRIVE LEGEND ADJUSTABLE AIR RIDE REAR SUSPENSION WITH ON BOARD COMPRESSOR BIKE CAN BE RAISED OR LOWERED WITH THE FLICK OF A SWITCH WHILE RIDING IT! ZOOMIE PIPES 250 REAR TIRE ALL CHROME PLATED BILLET EVERYTHING ON THIS BIKE IS EITHER ARLEN NESS OR ONE OFF HANDMADE THIS BIKE TOOK 13 MONTHS TO BUILD. PARTS ALONE WERE $50,000.00 ...WITHOUT DESIGN AND LABOR LOOK CAREFULLY AT THE PHOTOS....

Here's the details on this Pearl yellow low softail prostreet.  100'' rev tech . CCI 3'' open belt drive.

Beautiful 2001 Pro-One, 113" All Polished S&S engine, Dyno @ 107 HP with 115 Lbs of  Torque. Jims 6-Speed Transmission, Vance & Hines 2 into 1 Exhaust, Quad 4-Link rear suspension, 5" stretch frame, 38 degree rake front end, Everything Polished or Chromed, Eye catcher Candy Orange Paint with graphics. Minimal small chip in rear fender.  Beautiful Bike, Fast, fun and comfortable to ride.

I AM LISTING THIS FOR A FRIEND WHO DOES NOT HAVE AN EBAY ACCOUNT SO PLEASE IF YOU HAVE ANY QUESTIONS DIRECT THEM TO HIM AT 435 828 7000. HIS NAME IS BRAD. OR EMAIL HIM AT gails@ubtanet.com.

One of a kind, Great bike, Rides and handles perfect, Runs great. This motorcycle has many features such as Daytec Pro Street Chassis American Suspension Springer 100CC Inch Revtec Polished Engine 6 Speed Polished Revtec Polished Transmission Martin Brothers Pipes Wicked Engine Intake Excel Controls Carolina Custom Wheels BDL 5" Open Primary All Custom Sheet Metal and Paint  

Do not let the bike of your dreams pass you by! This bike is custom built to look good and ride fast. Runs Great!

2002 Custom built Pro Street Sportster.Project completed this year, barely broken in. No expense spared on this bike. Well over 30K invested.

Up for sale is a custom built street glide this bike was just built everything on the motorcycle is brand new it has 300 miles on it I will list some of the parts but there are too many to list the list goes like this all HHI wheels and brake calipers rotors bad dad rear fender width LED lights under the paint stretched bags has HHI triple trees and forks it has a 18/180 on the front and 18/180 on the rear full air fx front and rear air suspension 600 W arc audio amplifier and speakers it also has all LED lights in front it also has a ultra cool oil cooler the motor is a 116 S&S with ported heads and Andrews cams have all dyno sheets hydraulic clutch I have over $70,000 in this bike like I said there is too much to list.This bike is featured in American Iron magazine I have all the issues the bike was in. if you have any questions you may reach me at (203)-339-5468 i will allso consider trades for a old muscle cars thanks I reserve the right to end this auction early as this bike is being sold in the local classified ads thank you again for looking happy bidding

CHECK THE PICTURES OUT THIS IS A SUPER TUFF BIKE!!!!!THIS BIKE WAS DONE RIGHT BUT NOT OVERDONE.GREAT PAINT JOB,DEEP THROATY VANCE AND HINES PIPES,SUPER COMFORTABLE CORBIN SEAT,NEW BRAKES FRONT AND BACK,2 NEW TIRES JUST OVER 1,000 MILES AGO,ALL FLUIDS CHANGES AT THE BEGINNING OF THE SEASON,OVER THE PAST 2 YEARS WHICH I HAVE OWNED IT LUCUS SYNTHETIC OIL EVERY 1500 MILES.HAVE OWNED 2 SOFTAIL HARLEYS PRIOR TO THIS AND BELIEVE ME THIS IS A MUCH BETTER RIDE AND SUPER QUICK BIKE.

2002 Ron Simms custom, 131'' thug engine, 6-speed baker trans, BDL belt drive primary, 240mm rear tire, 18'' pm wheels, 13'' pm rotors, pm hand controls and foot controls, signature pm Simms calipers, legend air ride, Simms Thunder header pro-pipe. New parts include all brake lines, throttle cables, clutch cable, speedo cable, oil lines, fuel lines, fork seals and dust covers, fork oil, rotor bolts, pulley bolts, seat pan and upholstery, pm grips, handlebars, gas tank bolts, hand control switches, indicator lights, turn signal lens, headlight and visor. Re-chromed parts include triple trees, hand controls, center of floating rotors, primary cover, brake light mount, rear turn signals, axel covers, rear pulley,  front axel covers, Storz forks where rebuilt,  polished and anodized black. I had the engine rebuilt and polish $2400.

Up for Auction is my 2002 Custom ProStreet Motorcycle. This bike is a one of a kind built from the frame up so you will never see another one like it anywhere. To build this bike in parts alone without labor would be over 35K. I will list the specifics of the bike below but my favorite things about this bike are definitely the Goldammer Front Forks, TP 124" Engine, custom paint, right side drive and the way it handles and drives for a hardtail.  This bike turns heads and is talked about everywhere it's been.

This is a custom built street legal chrome moly frame dragster / street bike custom built fenders and gas tank custom built vulcan extra wide front end with a 140 front tire dual disc chrome performance machine calipers all around RCcomponent rims custom gas built gas tank notched at bottom for a forced wind air cleaner the eyes of the chrome skull on the tank are your neutral and oil light the motor is a 120 inch fresh fully polished merch motor the motor produces a TRUE 118 hp to the rear wheel also with compression releases 5 speed polished tranny chrome inner and outer primary THERE IS NO CLUTCH ASSEMBLY it was used on another project the rear tire size is a 295 THIS BIKE FLIES!! Some of the chrome is pitted and the paint is chipped I am getting rid of this bike due to being disabled and able to ride any more it took me 3 years to build and has my heart and sole in it good luck bidding you will not be disappointed

2003 Custom Softail. I have all the reciepts and Mso for this bike. Iowa Title.

Show polished S&S 107" 4" bore 4 1/4" stroke S&S forged pistons 10.5:1 compression ratio chrome-plated die-cast rocker covers S&S roller rocker arms S&S single-coil valve springs S&S 585 cam S&S Dual coil with key setup Crane Hi-4 Ignition manual adjustments S&S auto compression releases Doug Keim voltage regulator mount 36 amp charging system S&S G carb Manual choke High Flow Custom Air Cleaner $3,000 firm You can't beat this deal!! Motor, charging system, carb, ignition. Come get it Willing to trade for complete engine pullout: ls1, ls2, lq4, lq9 running condition no issues, with transmission and complete wire harness

Very clean 2003 Custom softail prostreet 96 CUBIC INCH S&S engine5 speed trans200 mm rear tire 21 in front tire all chrome froward controls corbin solo seat Very quick bike$1000 deposit on bike, New owner responsible for pick up. 

2003 Chopper Works Mirage 250 Featured in Iron Horse Magazine 2005 (Magazine comes with bike) This is a true show bike and a show stopper. Features: Avon 250 Rear Tire 124 cubic inch  Total Performance Engine. http://tpengines.com/  (2032cc engine A LOT OF POWER AND FAST) Only 9k miles on bike, but just had new rings put in the bike to freshen up the top end!

2003 SOFTAIL CUSTOM BUILT  WITH STATE OF CONNECTICUT VIN CT39204  CLEAR CONNECTICUT STATE TITLE  ISSUED 2003 ,WITH LETTER OF CORRECTION . TITLE SIGNED IN 2ND  REASSIGNMENT IN ERROR . 88 CU S&S SUPER STOCK  EVO MOTOR , S&S SUPER E ,H/D 5 SPEED ,MILEAGE UNKNOWN ,SPEEDOMETER IS NOT WORKING CORRECTLY ,CURRENTLY  6,807 MILES ,  NACELLE CHROME FRONT END ,   EXCELLANT SHOW PAINT , NICE ENGINE CHROME, SCREAMIN EAGLE PIPES , ARLEN NESS BILLET CONSOLE , SPOKE RIMS , FRONT TIRE 60% TREAD , REAR TIRE 30% TREAD , CHIPPED REAR FENDER ,RECENTLY  TRADED IN AT HARLEY DEALER ,  RUNS AND DRIVES LIKE A FAT BOY , EBAY SHIPPING LINK INCLUDED IN LISTING , NO STORAGE OR DOCUMENT FEES , DEPOSITS ARE NON REFUNDABLE ,CALL JOHN T HUNTER MOTOR SALES 518 370-2227 FOR INFO 

2003 Custom motorcycle. 121 CI. TP Engineering Motor, Bdl open primary with custom billet cover,revtech 6 speed transmission, Custom Billet Wheels that almost look like chrome, 21in front wheel matching 15 in rear wheel, 230 rear tire, Custom Paint, This Bike runs perfect and is a real head turner.

Many extras 

Custom professional paint, 121 TP motor, chrome frame, ceramic coated exhaust by Frankie Serrano. Pictures do not do this bike justice, must see to appreciate. Has no speedometer or turn signals.

 Show Stopper! Kept in New condition! Not a Nicer Bike out there~ The Best of Everything!

 For sale is my 2003 Amen chassis works pro street softail  this bike is not a bunch of parts thrown together just to make a bike  it was built for speed and it was built to ride (and has been reading it will need paint and some other cosmetic work) built with top-of-the-line parts I am the former owner of full-blown custom cycles in Las Vegas Nevada and out of the hundreds of bikes  I have owned and built this bike is one of the most comfortable to ride it has a 113 S&S  super sidewinder A six speed transmission with a 4 inch open primary it also has a 250 rear tire  too many custom parts to list this bike is for sale local auction will end when it sells please contact Dave at 443-485-7611 with any offers or questions thank you and good luck 

2003 Full Custom 11089 miles. Santee rigid frame 124 S&S motor Baker 6 speed transmissionS&S super G carb with thunder jet Rinehart exhaust Rivera pro clutch Wet system nitrous K&N air filterOptional use air shifter Shift light mounted on BarsOptional Wheelie bar with brake lightPassenger seat  This bike is in very nice condition. Best of the best parts everwhere. I am second owner.

Take a look at this $47K+ invested motorcycle at a seriously reduced price. This bike is custom built from the ground up, and has a clear special construction title. Low miles - only 4995.

2003 Pro-street Custom,  100 cu in hypercharged polished aluminum billet engine by Revtec, 5 speed, 8000 miles. Low, loud & Fast! Ready to ride... Call  Gary @ 330-590-0228

 This soft tail was originally built by Route66 customs.  It has a 100ci Rev Tech with a 6 speed trans. It has new 240 tire, PM brakes upgraded forward controls, hooker exhaust, ignition, coils, and belts. Only bad spot on bike is scrape on upper tree.

  2003 CUSTOM PROSTREET CHOPPER                       This auction is for a 2003 custom prostreet chopper. Bike is very fast and rides like a dream, will not beat the teeth out of your mouth/soft tail. Every part on the bike is like new with very low miles.

SOFTAIL"  Big Bear Pro Street Chopper. Pampered (lives in the garage) Low actual miles. 3k in the last 5 yrs 100 cubic inch very strong reliable engine.

500.00 DUE AT SALE CLOSE.WITHIN 24 HOURS    REMAINDER DUE WHEN PICKED UP. WITHIN 5 DAYS

I’m getting old and it’s time for my “ZRODâ€� to go.  I built this bike 10 years ago and every couple of years I would work on something for her.  Paint, engine, tranny, frame, lights, ect.  You can read the attached appraisals and the pictures really show the work in this bike.  The Ultima 127â€� engine with a custom dual Ultima R1 carb’s is matted to a Baker “Torque Boxâ€�. 3â€�BDL Primary to a 530 Chain final drive with a Russell Mitchell “Sprotterâ€� brake setup on a 17" x 200mm rear tire.  The front end is a Pauco 4â€� over Springer front end with a Wind Vest fairing on a 21" front tire.  Handle bar controls are Arlen Ness with Bad Lands Mirrors.  These are the mirrors that have the gages in them.  The chin spoiler is also a 3.5 quart oil tank.  I’ve never seen the temperature above 220° The Exhaust is Thunderheader that I added an O2 sensor to.  The readout is under 1 of the speaker covers on the dash.  The other speaker cover is blank. (no speakers either – I was going to add them, but the bike is too much fun)  It has the Legends air ride setup on the Pro-one 4 link rear end.  The transmission utilizes the Baker built-in ignition kill switch for FULL-THROTTLE shifting by foot or Jockey.  The Rat Fink even lights up.  There are (2) 300cca batteries under the seat to roll the motor over using the 2.4KW starter.  Be very clear that this bike is fast.  It’s not for beginners!!!!  In the right hands you’re the king of state.  I’ve dyno’d it at over 120 HP to the rear wheel and have run a 10.7 sec ¼ mile on the Teressi Dyno Drags.

Condition: Excellent condition V8 Kannon Motorcycle. Features One of the only 502s built by Kannon Motorcycle. This bike is in excellent condition, never laid down.

Pro Street. 96ci S&S Motor on Daytec Frame, Pro One Front end. Thunderheart Electronics.

Pro Street Frameworks, 124 cubic inch polished S&S engine, 6 speed Baker hydraulic transmission, air ride soft tail suspension, built-in air compressor, Performance Machine controls and wheels, 280 rear tire, very strong, high performance ride, black and chrome, Bill it for you open primary; $52,000 when new; condition of motorcycle on a scale of 1 to 5 is a 4, a "show stopper."

This is a 2004 Big Bear Venom custom built motorcycle. This bike is outstanding looking!! It has only 800 miles on it and has always been kept in a garage.

Bike runs strong just had everything serviced and changed the bike has about 13xxx on it now it's got Led lights, hids, sick custom paint job , sliders , alarm system , power commander , the spacers for the swing arm to make it stretched it's not 1 piece and tires are still good, bikes in great condition just got a brand new throttle body put it i do have a clean title . 

This is a 2004 Big Bear Venom! This bike is in great condition. It has 800 miles on it!

2004 Independent Low Life Custom CycleTotal Performance 124 cu.in., Dual Edlebrock Side Draft Carbs., Baker 6 Speed Right Side Drive, BDL 3" Open Belt Primary, Paul Yaffe Spike Front and Rear FendersFat Katz Fuel Tank, Zoomy Exhaust, Many extra parts, Over $65,000.00 in receipts, all literature and information on parts. Clear Title there is 700 miles on this unit.2011 Chicago Cycle Rama "Best in Class", "Outstanding Engine" and "Best Swing Arm". Walked away with Trophy's and Cash!!!2014 Donnie Smith Cycle and Hot Rod Invitational "1st Place in Pro Class" Walked away with the Last Trophy giving and Top Prize Money!!!!

Started this build in 2004,this is a Daytec style softtail frame 2 inch strech,2 inch rake.63 mm front end 2+,the top triple tree chrome lifted in one spot.The motor is 113 cubic inch Ultima,120 horse power,120 foot lbs of torque,show polished s&s super g carb.6 speed Daeil polished transmission 3 inch BDL open belt drive and clutch.21 inch Bayonet II polished front wheel,18 5.5 rear wheel.Matching rear chrome sprocket belt rear drive.This bike has all paper work for engine,frame,transmission and receipts,Must sell due to health issues,this comes with everything to complete Bike has all wiring,cables,bolts.Made seat pan would have to have the seat made,Bdl forward controls,Big Bear pipes,4 piston chrome brake calibers.1 1/2  drag bars.Custom Marble paint job.Everything is brand new, if you want a custom Motorcycle for a great price this is it..Just need probably a week of your time to complete.It has brand new Avon tires on it to 200 in the rear. Immediate DEPOSIT 500.00 DOLLARS no exceptions.This is a new Motorcycle that will turn heads,just wire,put cables on and ride. OVERSEAS SALES,Buyer responsible for all shipping and pick up.

2004 Wicked Image Custom Pro Street Bike is one of a kind. Complete custom from ground up. Many many custom parts, wheels are one of a kind, frame is one of a kind custom.

2004 Custom Built Soft Tail. 107” S&S Motor. Dyno’d at 110 HP at rear wheel Jims 5 speed trans Rolling Thunder frame 230 rear tire RC Components Wheels Performance Machine Brakes Stainless Rotors New Front Tire New Battery Super Trap Exhaust 2 up seat with passenger pegs Powder Coated Frame – Silver Pearl Metallic Custom Paint with Flames   This is a beautiful custom built soft tail with a 107” S&S motor.

YOU ARE BIDDING ON 2004 PROSTREET CUSTOM ENGINE IS 08 S&S 120 CU IN. 6 SPEED TRANS W/ BELT DRIVE 3IN PRIMARY. AIR RIDE SUSPENSION .

2004 Ultra Motorcycle Company Pro Street model. Perfect condition! Under 1200 miles.

~iMMACULATE CUSTOM PRO STREET~ "Collector Quality" "STEALTH SILVER 300' WIDE" One of kind and like New  Super Custom Show Quality Custom Bike all metal Fabrication by ZACKYS CUSTOMS  This beauty has to many Custom Features and needs somebody who can ride this PHAT DADDY WIDE, Bottomline to  many toys and no time !!!!   Bike Details list.   18" one of kind front wheel with matching 18"x 11" black/machined rear wheels   300 avon rear tire.   Smooth handlebars with internal throttle.

2004 Wicked Image Custom Pro Street Bike is one of a kind. Complete custom from ground up. Many many custom parts, wheels are one of a kind, frame is one of a  kind custom.

 **********RESERVE LOWERED********** LOWERED BUY IT NOW PRICE  IF YOU SELECT BUY IT NOW I WILL PAY FOR SHIPPING TO THE LOWER 48  Trades Possible for Muscle Cars, Classics, etc...    (Trades plus cash either way may work as well)   OPEN TO REASONABLE OFFERS!      Custom Built Dropped Seat Soft tail Chopper, by Biker Dreams of in Alpharetta GA.   This bike had a $65/70,000.000 build sheet.     TC-250 DROP SEAT SOFTTAIL FRAME & STRECHED GAS TANK, BY EDDIE TROTTA / THUNDER CYCLE DESIGN (Fort Lauderdale, FL)    Custom Front Forks, Hawg Halters Brakes,     One off Custom Cut wheels.