Find or Sell Motorcycles & Scooters in USA
  • 1982 Honda CB1982 Honda CB (1982)
    1982 Honda CB900F Supersport Clean, modified supersport, FCR's, CBR wheels etc. etc. I have owned this bike since 2005.  In 2008 I tore it completely down to the bare frame.  The frame was media blasted and powder coated, along with a number of the bolt-on items; rear set backing plates, taillight mount etc.  While the bike had always run well, I gave the engine a quick overhaul while it was out of the frame.  The engine received a valve lap, new timing chain tensioners and a complete OEM gasket set including new head and base gaskets and new valve stem seals.  A set of CB1100F cams were fitted during reassembly as the 1100F cams have a slightly hotter profile than the 900F units.  A larger aftermarket oil coiler and braided oil cooler lines were also fitted.  Valves have been checked and adjusted regularly and the oil and filter changed each season.
    2016-07-11 04:44:24
    Hollidaysburg, Pennsylvania, United States
    31
    8072
  • 1972 Honda CB350 K4 Twin - Excellent Condition1972 Honda CB350 K4 Twin - Excellent Condition (1972)
    1972 CB350 K4   Here is a very nice 1972 CB350 K4 Twin in Honda’s “Light Ruby Red” color.  This motorcycle has been treated to a thorough detailing, and looks outstanding.  There are lower mileage CB350s out there, but few are as clean as this one.  It is also very hard to find red CB350s that don’t have badly sun faded paint.  The paint on this bike still is bright red.  Even the red zone on the tachometer is still a deep shade of red.  The side cover looks faded on top in the second photo.  It isn't.  My camera overloaded on the red in the sunshine. Mechanically, this CB350 runs great.  It starts easily and settles into an even idle.  It pulls well through the gears and stops smoothly.  Headlight, taillight, brake light, turn signals, instrument lights, high beam indicator light and horn all work properly.  New front and rear tires (and tubes) with a classic tread pattern have been installed.  A new seat cover and strap in the correct Honda pattern was also installed.  It will remain soft and flexible for many years to come. The gas tank is dent-free, but does have a few minor scratches.  The side covers are free of cracks, but the left side cover has a noticeable scratch, about an inch long.  The inside of the gas tank is very clean.  The original petcock would not flow gas on the reserve position, so a new Honda petcock was installed.  The carbs have been cleaned and rebuilt, and the fuel lines have been replaced with new ones.
    2013-09-03 21:12:36
    Hollidaysburg, Pennsylvania, US
    10,675
    2,450.00

Honda CB Price Analytics

Moto blog

Honda has applied for a European Vehicle Type Approval for a new model

Fri, 06 Aug 2021

Earlier this year, a Japanese company patented the name and layout of the new NT1100 model. A while later, renderings of what a sports touring car with the engine and transmission from the CRF1100 Africa Twin might look like appeared on the network. Since then, no new information about the appearance of the NT1100 has been leaked, but just the other day it became clear that the model will be presented soon.

Honda has unveiled the 2022 CRF450RX

Fri, 04 Jun 2021

There are no crutial changes, the manufacture's engineers, with the help of factory racers, were fine-tuning the motorcycle. As a result, the enduro CRF450RX, like the cross-country CRF450R, received a retuned electronic engine control unit, as well as recalibrated shock absorbers, which had a positive effect on enduro handling.

Honda has announced plans to go completely zero-emission

Sun, 30 May 2021

The company President Toshihiro Mibe said that Honda is committed to being completely carbon-neutral across all of its products. To do this, the company is expanding the range of electric vehicles and has also developed a standard for replaceable batteries Honda Mobile Power Pack.

Looking forward to the NX200 - Honda's new touring enduro

Thu, 06 May 2021

It will be a real adventurer, only a small one. The motorcycle will focus on the Asian markets. These isn't much information about the bike yet, but it is preliminary known that it will be built on the CB190 platform and will receive a single-cylinder engine with a displacement of 184 cc.

The other day, Honda patented the name and layout of the NT1100 motorcycle

Fri, 12 Feb 2021

The Africa Twin parallel twin will be installed in another chassis - an asphalt tourist one. Unfortunately, at the moment there are no official pictures, only the fantasies of fans and third-party designers. Only one thing is clear - the engine will be 1100cc, and just like the CRF1100 Africa Twin touring enduro and CMX1100 Rebel chopper, the engine will be offered with both a conventional motorcycle foot-shift gearbox and a DCT robot.

Honda has updated its flagship GL1800 Gold Wing tourer for 2021

Tue, 19 Jan 2021

There are no radical changes, improvements have affected parts of Honda tourers that are important for ensuring the comfort of the rider. In addition, new color and graphic schemes have appeared for the 2021 models. The Tour version has Gunmeatal Black Metallic and Candy Ardent Red.

Honda introduced the European version of the MSX125 Grom 2021 model year

Sat, 12 Sep 2020

The legendary microbike received an engine that complies with Euro5 standards and significantly upgraded looks. In addition, the MSX125 will now also be sold under its own name Grom on the European market. Honda Grom received an updated 125cc single-cylinder engine with 9.6 horsepower, aggregated with a five-speed gearbox instead of the previous "four-speed".

Honda will introduce the new CBR600RR later this year

Wed, 08 Jul 2020

There has been no official information from Honda about the new generation CBR600RR yet, but it became known that the 2021 model will echo the older Fireblade in terms of its exterior. The "Six hundred" will receive a "two-eyed" LED head optics, the air intake will be located in the middle. Winglets will be added to the fairing to increase downforce at high speeds.

Honda has patented a technical solution from the arsenal of the Gold Wing tourer.

Thu, 02 Apr 2020

The modern Honda Gold Wing is equipped with a double wishbone front suspension, which not only increases ride comfort, but also allows the geometry of the motorcycle not to change during acceleration and braking. Lever suspension, which stabilizes the bahavior, may appear on other models of the company in the future. This is hinted at by patent images of similar systems integrated into the design of completely different motorcycles - the classic CB1100 and the small-capacity C125 Super Cub.

Little brother: Honda introduced a "nano version" of the X-ADV scooter

Sun, 11 Aug 2019

The model is called ADV 150 and, despite its similarity with the X, it has nothing to do with it. The engine is a single-cylinder with a volume of 149.3 "cubes", developing 14.2 hp at 8500 rpm and 13.8 Nm at 6500 rpm. Suspension is a regular telescopic fork and two Showa rear shocks.