Bobber Bobber Motorcycles, page #4

2013 just built never titled  have all mso to register at dmv   all new components  turn key //113 polished ultima engine with matching  ultima drive line // ready for spring season //only ridden locally to shows have all mso  papers to register at dmv  //6 speed  rsd // //call 585 544 9924 mike for more info //drives ez set up to ride n show too   started as a complete roller from chassis designs same guy who builds them for rooke from what im told  ///has no paint all powdercoat not one scratch or blemish on complete bike // has fancy arlen ness dual caliper rear brake set up 13in rotor special dual rotor with ultima 4 piston calipers works great you still have foot and hand brake as normal for regular two brake set ups  //so front end  is so clean //with 2 brakes still //hardluck seat// spitfire mid controls //one off exh //240 rear 21 front //harley oem battery gel //billet batterybox and kickstand  //just got back from bike there was only a few bikes w/ this detail ////starts drives like it should //have 3 mso needed to register //new components ///none used pm copy hand controls //has basic chopper wiring  with  ignition switch //on off// has button on starter to start has headlight tailight brake lites no turn signals but theres tabs onframe if desired i was riding today ez to drive about as long as my crossbones im 5ft /11 300lbs fits me well //the powder is silver w lotta flake really pops //nice clean as you can see i will help with shipping best i can local pick up ok too .//has famous nana rooke frt end //rides as nice as my crossbones //look at pics about same size //gas tank under seat has cool gas guage //oil tank under trans very clean design from chassis s designs  

It is a Custom Rigid Bobber w/ a Harley Davidson Evo motor 1200cc. This bike has brand new: Paugcho Rigid Frame 16" Ape Hangers w/ 1" risers Oil Tank Rear Bobbed Fender Custom paint - charcoal grey w/ 2" black racing stripe down middle of tank and back fender. Iron Cross on both sides of tank in black outlined in white.

Up for auction is my custom built 2009 Bobber. I purchased all of the parts during a long deployment to Iraq and assembled the bike upon my return in 2009. I live in Ohio and the bike is located at my fathers in Colorado so I have not had time to ride it and it is a shame for it to sit, hopefully someone will win and it can finally be used the way in which it was intended.

Rolling frame with motor. 1973 Honda cb350 K scrambler that has had a TC Bros weld on hard tail added. Build your own bike from this solid powerplant!Comes with all new wiring harness and electronics in tact. Ran until stripped. 

Re-listed due to a non paying bidder. This in a near show quality build in showroom condition. Ridden only a few times since completion in 2014. Not ridden since.

2013 OLD 97 CHOPPERS NEW 2013 HARLEY DAVIDSON OLD 97 CHOPPER BOBBER HAND BUILT BY 40 YEAR MASTER TECH. THE V TWIN ENGINE IS A NEW HARLEY DAVIDSON OEM 80ci EVO, WE DISASSEMBLE AND WE INSTALLED 85ci BIG BORE KIT. THE MOTOR IS 85ci WITH WISCO PISTON 10 1/2 TO 1 COMPRESSION,ANDREWS EV127 CAM, STAINLESS STEEL MANLY VALVES.

RODS & RIDES MOTORCYCLE COMPANY The FuKentrike is one of the wildest creations from Rods & Rides Motorcycle Company. The trike features the same performance and the same quality as the rest of the line up we build. As always the Ultima Performance El Bruto series engine is what the trike is built around. This engine produces 110 HP at the rear wheels.

Penn Jersey Cycles bobber...I had the bike built and had a baby soon after. Now I have 0 time for the bike. It's a rigid with a springer fron end, 80' evo motor or 1340cc...its a bad a** bike

Photo Viewer 2013 Custom Built Motorcycles Bobber Custom 330 Chassis RODS & RIDES BY TD 330 CHASSIS - DROPSEAT BOBBER CUSTOM GRAY PAINT - LOW MILES VIEW OTHER AUCTIONS ASK SELLER QUESTION Vital Information Year Make Model Mileage 2013 Custom Built Motorcycles Bobber Custom 330 Chas... 100 Exterior Interior Stock # VIN GRAY/BLACK/SILVER BLACK F7847 1R92H2A19DS699302 Engine view window sticker view new window sticker Photos TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 TO END AUCTION AND BUY NOW OR FOR ANY QUESTIONS OR ADDITIONAL PHOTOS CALL OR TEXT JULIAN AT 704-804-3396 OR DENIS AT 704-605-5130 Description 2013 Custom Built Motorcycles Bobber Custom 330 Chassis RODS & RIDES BY TD, LLC. 330 CHASSIS - DROPSEAT BOBBER WORLD FAMOUS MACHINES BUILT BY HAND, ONE AT A TIME .

Sanger Down and Dirty rigid frame 100 inch Rev Tech engine, 5 speed Rev Tech Transmission, Rev Tech electronics and Drivetrain. Paughco Z bars and oil tank. Performance machine billet rear caliper, floating rotor and bracket.

Custom Built Bobber Motorcycle Made From A 1981 Yamaha XS 650. This Is A Brand New Build With Around 100 Miles. This Bike Is Turn Key And Ready To Ride.

A beautiful machine you will get the looks and the questions where ever you ride to.Way to many extras to list must see to appreciate 

A completely rebuilt 74 cubic inch iron head sportster. Motorcycle runs great. I purchased this bike as a basket case in 2002 and spent 2 years putting it together.

 This is a custom Harley Davidson Shovelhead. This is one awesome motorcycle with an awesome paint job.  It's a 1975 Harley Davidson Shovelhead with a four speed transmission set inside a Paughco Wish Bone frame 2 1/4 up 0 out with a 30 degree rake. The Front end is a Paughco 3 over springer.

Just completed 1993 89c.i. EVO sporty.89 inch S&S Big bore kit (flywheels,rod's,piston's,cylinders,adjustable pushrod's).Andrew's cam's,Crane Ing,S&S E carb.Motor is set in a candy red powder coated Krafttech frame with a DNA springer ,Invader wheels(These wheels are not Knock off's) with new Avon Cobra tires. The rear has a DNA sprotor set up the front is a spool.(N0 front brake) Cole Foster Salinas Boyz Fuel tank,Krafttech oil tank.The pipe's are Bassani sweeper's.The bike has a new H-D stator,CCI regulator and a new sealed H-D battery.The title match's motor with m.s.o. for the frame.This was a split case build from the ground up with nothing left untouched.

THIS IS A VERY NICE AND FAST BIKE WITH A 114 TP MOTOR AND 300 REAR TIRE IT HAS A 6 SPEED TRANS. AND A NICE BLACK PAINT JOB CALL IF ANY QUESTIONS 434-386-7190 THANKS FOR LOOKING

Up for sell is a custom loosespokz two seater bar hopper. your choice of tank, silver Honda tank or blue distressed tank with fuel gauge bottle. Bike has RC billet wheels and custom air bagged twin seat.

Just completed 1993 89c.i. EVO sporty.89 inch S&S Big bore kit (flywheels,rod's,piston's,cylinders,adjustable pushrod's).Andrew's cam's,Crane Ing,S&S E carb.Motor is set in a candy red powder coated Krafttech frame with a DNA springer front end,Invader wheels(These wheels are not Knock off's) with new Avon Cobra tires. The rear has a DNA sprotor set up the front is a spool.(N0 front brake) Cole Foster Salinas Boyz Fuel tank,Krafttech oil tank.The pipe's are Bassani sweeper's.The bike has a new H-D stator,CCI regulator and a new sealed H-D battery.The title match's motor with m.s.o. for the frame.This was a split case build from the ground up with nothing left untouched.

Up for sell is your choice of wide tire or skinny in any color combo.. Bikes take 4 weeks to build and come with clean titles. Call for any questions.

Relisting due to nonpayment. Please don't bid if your not serious.  Up for sale Hardknock Kikker 5150, 125cc Titled in Minnesota(in hand), cool little 3/4 size bike, jockey shift, kick start, electric start, I've done some customizing, bigger apes and new throttle cable and grips, i've removed the front brake( still have all the parts). New carb 22mm, new fuel filter, customized the way it starts(stealthy button start).

 2008 Logic cycle Eclipse. This is one cool bike with beautiful candy apple paint frame and all. This bike is so cool even Warren Buffet road it.

2011 Custom Bobber 117 Mile Gray Powder Coat 200 Wide Tire Chromoly Frame ALL TIG Welded and USA Made 34 Degrees of Rake & 4" DT Stretch 107" SMW, Inc Nat Panhead 5 Speed Nat "Kicker" RevTech Transmission 60 Spoke Chrome Wheels or optional SMW, Inc. Billet Wheels SMW, Inc. Knuckler 3 3/8" Open Belt w/ Outer Bearing Support Custom Bobber Gas Tank, 9" High-Grade Steel Rigid Rear Fender Santee Chrome Shorty Pipes Black Leather Solo Seat 16' Chrome Ape Hangers Thunder Heart Wiring Harness and Electrical Chrome Front Headlight and Tail Light assemblies SMW, Inc.

2006 Flyrite Bobber, 96" Fully polished S&S Superstock billet motor and gear case, S&S Super E carb,  3" BDL open primary with quite clutch and O-ring chain drive final, 5 speed ultima tranny. Front end in a polished Narrow glide, evo softail brakes front and back, tires are like new.  This bike is a factory titled and insurered, no worries of "custom" titling troubles.

 Everything on this Bike is Like Brand New. Totally Sleek and eye catching. You need to see this.

Brand new custom motorcycle built by Pete Minardi of Precision Motorcycles. Titled as a 1991 Harley Davidson. Modified chassis 34 degree rake.

WHERE DO I START?THIS LITTLE DROP SEAT CUSTOM RUNS BETTER THAN IT LOOKS!IF YOU WANT TO STAND OUT FROM THE BIG DOG, TEXAS CHOPPER, STREET GLIDE CROWD, SHOW UP RIDING THIS!ACTUAL 1977 H-D TITLE, SO NO CONSTRUCTED TITLE BS. THIS BIKE IS FULLY CUSTOM, HAND BUILT, ONE-OF-A-KIND.THE FOLLOWING PARTS ARE PROFESSIONALLY HAND FABRICATED:FRAME, HANDLEBARS, FENDER, OIL TANK, PEGS, CHAIN ADJUSTER, CABLE OVER HYDRAULIC BRAKE SET UP, MODIFIED OEM 66-71 SPORTSTER TANK, TAIL LIGHT / LICENSE PLATE BRACKET, EVERYTHING BRASS! THESE PARTS ARE COMPLETELY ONE OF A KIND.

Custom built bobber, 96 inch shovel with 6 speed trans. Too much to list , please call or text Scott for all info. 317-395-4011Delivery is available Built by capones street rod motorcycles

I am a private builder from Sarasota FL. I have 5 class wins at Thunder on the Bay Sarasota FL,5 class wins at The Boardwalk show Daytona FL, 3 class wins at Florida Bike Builder's Expo,3 class wins at the Rat's hole, 6 Bike's in Barnett's online magazine and have a bike on the cover of April's 2016 of Easyrider's & V-Twin Magazine, The reason I say these thing's is to let you know this is not my first rodeo.Now about the bike.This bike is all ready a proven winner and is very rideable it was a 1993 883 that has a 1200 kit in it.It is a ground up split case build 1200 kit,valve job,S&S Super B,Points. All the outer case,s are powder coated as well is the frame and front end.

STANDARD 88 PAN HEAD REPLICA MOTOR.  REV TECH 4 SPEED REPLICA.  BELT DRIVE PERFORMANCE CLUTCH.

I am selling my Custom built bobber, It is built with American made parts, I did not go cheap on this bike. It is built from the highest end parts. The thing handles like it is on rails, rides very nice.

Vintage Style Modern Bobber. Street legal I am original builder/owner. This is a new build 2007.

2010 Custom built Bobber, never used, show room condition from private collection. Great show bike, real head turner, loud and fast Video of bike available upon request. Shipping, Not included in price.

This bike is a must see with only 214 miles. just built and put on a shelf i start it up once a month   keep the battery and gas fresh    

HERES ONE YOU DONT SEE EVERYDAY..... CUSTOM BUILT LEROY THOMPSON CUSTOM HARDTAIL DROP SEAT CHOPPER BOBBER!! BUILT IN 2011 CUSTOMER PAID 22000.00 FOR HER, PRETTY MUCH A HANDBUILT CUSTOM....

BUILT BY RODS AND RIDES BY TD  ST LOUIS, MO.    Rods & Rides is not just a brand name, it's a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA.  The brand is a very well known name in the national motorcycle shows,  magazines, and several TV channels but that's not where is stops.

2012 Sucker Punch Sally 66 Bobber Original owner and purchased from a Sucker Punch Sally Dealer Mileage - 254 Engine - S&S Harley Davidson Evolution Type ohv 45 Degree V-Twin Carburetor - S&S Super E Displacement - 81.6 Cubic Inch 1340cc Bore & Stroke - 3.498 x 4.250 Compression Ratio - 8.5 to 1 Fuel Capacity - 2.25 Gallons Oil Capacity - 3 Quarts Transmission - 6 Speed RevTech Primary Drive - Belt Final Drive - Chain Dry Weight - 495 Lbs. Frame - 30 Degrees No-Stretch Rigid Frame Front Suspension - 41 mm Telescopic with Pro-One lowers Seat Height - 24 Inches Ground Clearance - 4 Inches Wheelbase - 65 Inches Front Brake - Four Piston Rear Brake - Four Piston Front Tire - 16 inch Rear Tire - 180/60vb-16 Ignition  - Dual Fire Electronic Message or email for any further details

You are bidding on a very complete rolling chassis in excellent condition. I am the original owner, and primary builder. It has very low mileage because it was constructed to showcase the Keck 120 billet motors (which I also built), and was used at trade shows and events.

If you are wanting a custom built motorcycle this Old School Bobber built by C&S Cycles and dubbed the “Black Widow” is one BAD ASS BIKE! Featured on the cover of Full Throttle Magazine with a 2 page center story, this is a one of a kind chance of a lifetime for a real old school biker that’s crazy enough to ride a bike like this!  I really don't even know where to begin describing this one-of-a-kind scooter. To start, I will say that I have never ridden or seen anything like this in my 59 year old life!

2005 Honda shadow that has been professionally built.. Frame has been stretched widened and lowered. 1930s ford taillight powder coated Springer white leather Seat Custom Dual pinstriped Headlights custom exhaust with Flame thrower Kit!

Up for Auction an awesome built 2011 Custom Show Motorcycle Bobber style motorcycle built on a Kraft Tech soft tail frame 113 cubic inch motor, 6 speed tranny, open belt primary- all by Ultima 5 spoke wheels, discs, pulley - all by RC Components LePera seat Wild Ones Outlaw handlebars Metzler tires Indian Larry gas tank Performance Machine brakes Vance and Hines Big Shot Shorts exhaust Front fender(not shown in photo's) Custom paint by Mike Meyers This bike is for sale or trade. Will listen to any to your offers. Contact Jack 515-577-8291 Buyer responsible for shipping or will deliver to lower 48 for $500.00 Good Luck Bidding    

       2012 CUSTOM BUILT BOBBER * S&S 110' MOTOR* 5 SPEED TRANSMISSION* 60 SPOKE FRONT WHEEL* SOLID ALUMINUM RER WHEEL* RIVERA OPEN BELT PRIMARY* FLAT BLACK PAINT* REAR SPROTOR* ONE OFF MEXICAN BLANKET SEAT* BUILT WITH THE BEST OF EVERYTHING LOW RESERVE

Jeremy Coon (888) 467-2410 9803 North Hwy 301 Wildwood Florida 34785     15 Demon Bobber Vehicle Information Year: 2015 Make: Demon Model: Bobber Condition: used     1 of 12  View Large Images   Description CUSTOM SPRINGER BOBBER!! SPRING SEAT, MINI APES, CUSTOM FOWARD CONTROLS, CHROME CALIPERS, AND MORE!! FINANCING RATES STARTING AT 3.64% FOR 75 MONTHS!!

Year: 1974 Model: Iron Head Builder: FD Motorcycle and Customs Displacement: 995.7cc Carb: S&S Shorty Air Cleaner: S&S Exhaust: Straight Pipes Transmission: Right side shift 4 speed Frame: 1974 Custom Hardtail       Rake 38 Degrees       4" Stretch Wheels: Front Wheel Size 21" 40 Spoke Rim     Tire is an Avon Speedmaster Front Brake: N/A Rear Wheel: Stock H-D    Size 16" Spoke   Tire is a Shinko 130/90-16 Rear Brake: Drum H-D Stock Paint: Color Gloss Black    Engine: Satin Black Accessories: Foot Controls & seat built by FD Motorcycle and Customs. Rear fender ribbed 5" wide. Tail Light Brass by FD Motorcycle and Customs.

90HP  03 trans up grade,  9.0 compression,   402 cams,    started as V92c motor & trans built by Kevin cross a well know victory teck in fl, bike built an assembled by  thunder struck victory customs  (Danny)  was a 2009  southeastern victory rally raffle bike for victory junction gang origination, show bike /bar hopper fun to ride & show many tropheys!! my bad back is making me sale her, grandkids named her LITTLE SISTER. compared to my 09 kingpin at the time.

This is a award winning bobber built by Mike Bauer and painted by Viking Cycle Art Inc.  It is Featured in the November 2011 issue of V-Twin Magazine ( No. 127) and the March 2012 Issue of Easyriders Magazine ( No.

MINT CONDITION DARWIN CUSTOMS BRASS BALLS BOBBER; ORIGINAL OWNER; LESS THAN 500 MILES; TAKEN TO LOCAL BIKE SHOWS; AWARD WINNING CUSTOM BUILDER DAR HOLDSWORTH HAS WON CUSTOM BIKE EVENTS AT STURGIS AND ATTENDS ANNUALLY WITH HIS LINE; FEATURED IN SEVERAL BIKE MAGAZINES. CUSTOM BUILT FOR ME. H-D EVO ENGINE 1340 CC HOPPED UP W/ CAM; 6 SPEED ULTIMA TRANNY; SPORTSTER TANK;  80 SPOKE FRONT AND REAR WHEELS;METZLER 880E TIRES - 200 ON BACK; HEADWINDS HEADLIGHT;DIAMOND TAILLIGHT; PM CONTROLS;CUSTOM PAINT WITH DESIGNS.; ONE OF A KIND WILL GET YOU MANY LOOKS; CUSTOM MADE CERAMIC COATED STEP TUNED DRAG PIPES; RICH PHILLIPS HAND TOOLED LEATHER SEAT; A REAL BAD BOY!

I am selling my knucklehead, brand new S&S 93" pro stock knucklehead billet engine!Rigid frame, custom springer, old school firestone and Avon tires, all stainless fasteners with leather washers, stainless exhaust, brass headlight and taillight, stainless license plate and tail light holder , custom seat with Italian leather, all hidden wiring, S&S Super E carb,6 speed transmission, 2" open primary, Brembo brakes and much more .This bike was commissioned to be built with the highest standards and the best parts . Everything is brand new, the whole bike has a total of 500 shake down miles through Texas Hill Country.The bike was built to ride and ride well.  Runs and rides fantastic, the brakes are awesome, and the S&S engine is a serious piece of art!Beautiful machine, I am the first and only owner, I have the clean and clear Texas title in my name in hand.This Knucklehead is ready for a show, to ride or display.Please feel free to email with any questions.Thank you

NO RESERVE Info: This is a practically new Custom Bobber built at Southern Motorcycle, Inc with a CLEAR State Title.   Not a garage built or personal built custom, we built it here in our facility by certified technicians, and titled in the state of Oklahoma.   The parts used to make this bike are 90% USA made from Leading Manufactures, and we listed the major parts below.    We used this motorcycle mainly as a advertisement and display bike for our wheels, rotors, forward controls, and engine.   It has less than 500 miles on the bike.  We are putting it up for auction because we have new projects and advertisements we are doing.     The value of the bike is estimated at above $20,000, but we are auctioning it off with NO RESERVE Here is a parts list: Kraft-Tech Frame 28 degrees with FXR swingarm (USA) 127ci Southern Proof Engine with S&S Carb (USA) 3" BDL Open Belt Drive (USA) Terry Components starter (USA) 6-speed AU Transmission (Korea) Progressive Rear Shocks (USA) GMA Controls (USA) HHI Brake Calipers, brackets, and HW (USA) Goodrich lines and cables (USA) USA made leather seat, dash cover, and grips (USA) Southern Black Contrast Octane Wheels, rotor, and sprocket (USA) Southern Black Contrast Forward Foot Controls (USA) Midwest Front End forks and trees (Taiwan) Avon Tires 150/18 front and 200/18 rear (USA) Dakota Digital Speedo and pick-up (USA) USA made wiring harness (USA) Two tone Black Paint (gloss on the bottom and matte black on top and sides)  How it Rides: The motorcycle rides great (probably the best custom we have rode).   It sits low to the ground, but handles good on corners, but does not lean like a Softail or Sporster.  It has beyond enough power, maybe too much.     Condition of Motorcycle: We guarantee everything is in good working order at the time of purchase with NO DAMAGE.   As with any custom bike, it is like owning a race car, just requires more maintenance and up keep.   The motorcycle is sold as is only.   If you ever need parts, they are easy to find or you can get them through Southern Motorcycle, Inc.

2008 custom built bobber with a 100ci Rev Tech motor,open primary,240 Metzeler rear tire and attachable rear passenger fender with passenger pad. The bike has around 100 hours on it and all fluids have been changed

2008 Leroy Thompson Bobber named "Trendkill". This is a one of a kind, custom motorcycle. 23" front wheel with dual perimeter rotors.

THIS IS A SWEET CUSTOM BOBBER WITH AN 80 CUBE EVO ENGINE SLIGHTLY WARMED OVER WITH A CAM AND A SUPER E CARB, RUNS LIKE A TOP AND RIDES GREAT! FRAME IS POWDERCOATED IN HAMMERTONE CHARCOAL AND THE TANK AND FENDER ARE WRINKLE FINISH BLACK. THIS BIKE GETS THUMBS UP AND COMMENTS EVERYWHERE IT GOES AND JUST HAS A BAD ASS COOL LOOK TO IT!

you looking at a 750cc suz,bobber custom built  it has new white wall tires it starts right up and runs and drives great it is really for the road,thanks for looking and good luck bidding,,,

Up for sale is a freshly built Kraft Tech Rigid. I purchased the bike nearly completed and did the entire build all over again ensuring everything was done the correct way with the appropriate parts. The bike has never been titled because the previous ownership never had completed it.

2015 CUSTOM BOBBER Top Line Information Year: 2015 VIN: MVIN357797IND Make: CUSTOM Stock: A1206 Model/Trim: BOBBER Condition: Pre-Owned Engine: 95 cc HARLEY DAVIDSON Exterior: Black Transmission: 6-SPEED Mileage: 500 Additional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * * Phone: (630)425-3237 Alt: (630)624-8303 DescriptionCUSTOM SHOVELHEAD BOBBER!!! 2015 CUSTOM BOBBER FRESH 79 SHOVELHEAD MOTOR 95CI: S&S 4 5/8 FLYWHEEL, RODS, FORGED PISTONS(9:5:1) ANDREWS C CAM MANLEY STAINLESS VALVES, HIGH LIFT SPRINGS W/ TITANIUM COLLARS SOLID LIFTERS ROWE CAST IRON GUIDES COLONY ALUMINUM PUSH RODS STEEL BREATHER GEAR MILD HEAD PORTING STEEL BREATHER GEAR REBUILT STOCK OIL PUMP CRAFTTECH SOFTAIL FRAME ULTIMA 6 SPEED TRANSMISSION HYDRAULIC CLUTCH CHROME SPOKE WHEELS SPRINGER FRONT END CUSTOM LEATHER SEAT 2 SETS OF EXHAUST   At our dealership we work very hard to accurately describe our vehicles through text descriptions and elaborate photos. When you purchase a pre-owned vehicle it is not a new vehicle.

2011 Ultima Bobber Ultima 120 motor Ultima 6 speed Ultima starter Mikuni 48 carb Springer front end Springer seat Dual disc brakes Brass forward controls 10" ape hanger bars Short heat wrapped exhausts Headwinds headlight Rear foot pegs mounted into frame ( screw in and out if you want removed ) Suction cup rear seat included 2" open belt primary Chain drive Ridewright wheels 1st. service just completed ( oil change and bike thoroughly checked over ) *** CLEAR FLORIDA TITLE  *** This bobber was built by a licensed Florida State motorcycle builder... Title make: ACYL This bobber can be registered and insured in all states and is a blast to ride...

2012 rooke style bobber 113 Midwest ultima 6 spd ultima 2" ol school belt 250 rear This bike was finished mid summer 2012 and has estimated 500 miles on it , runs and drives perfect ,  The orange chopper in the last picture could also be had for $14,000.00

This bike could be close to one of a kind. Want to turn some heads in the streets this is the bike for you. Want to enter it into a show this is the bike for you.

Custom Harley Rigid Bobber- Professionally built- Kraftech frame, 80'' Evo style motor with a mild cam,Built on S@S cases and every thing else Harley OEM parts. Super E polished carb. 5 speed tranny linked to a BDL 3'' open belt.

2006 pro street custom new ultima 107ci motor with 500 miles. new 0pen belt ultima primary and clutch. 5 speed trans.

  HD  Bobber/Chopper For Sale- like the "Billy Bike" This Bike was built to resemble the famous "Billy Bike" ridden by Dennis Hopper in the iconic "Easy Rider" Movie from 1969.  It has been a prolific Bike show winner and is a lot of fun to drive with the low seat height and 96" stroker motor!    Frame:   Paughco-Rigid Wishbone-35 degree rake-Custom Molded and painted   Gas Tank: Paughco-3 .25 gallon custom "flame"paintjob.   Forks:  Paughco-Springer -3" over extension- 35 degree rake-pull back "drag" style bars.   Wheels: Landmark-Rear Wheel-18" for 180 tire-Ball Hub-80 Spoke "diamond cut".