2003 Honda Xr 250r Dirt Bike on 2040-motos

Honda XR tech info

Type:Dirt Bike Phone:7606080937

Moto blog

MotoGP should return to Suzuka

Suzuka was always one of the great circuits; unfortunately the Japanese track was dropped following the tragic death of Daijiro Kato in 2003 as the course was deemed too tight and dangerous for the rapid four-strokes. Owned by Honda, Suzuka is a magical place combining arching S-bends from the start of the lap, high-speed in the middle and finished off with the technical and oft racing deciding final chicane, the location of many fantastic last lap battles. However the death of Kato, and Honda’s major hope of a Japanese champion, placed a dark cloud over the 5.807 kilometres of tarmac.

2013 Honda CB500F, CB500X and CBR500R Recalled in Australia

Honda has recalled its 2013 CB500F, CB500X and CBR500R models in Australia because of a defect that could cause an oil leak. At the moment, no recall has been announced for the U.S., though there is a good possibility one will be announced shortly, as all 500-series models are manufactured in the same Honda factory in Thailand. There is a similar recall for the Japanese market for the CB400F, CB400X and CBR400R, which are mechanically identical to Honda’s 500-series models, but with a smaller engine to meet the country’s tiered licensing requirements.  According to the Australian and Japanese recall notices, the rocker arm shaft sealing bolt may come loose, causing oil to leak from the engine.

New: Venhill 888 fast-action twistgrips

CONTROL specialist Venhill has launched its new 888 range of bike-specific fast action twistgrips.  Supplied complete with the company's top of the range Featherlight cables, the kits are designed for a straightforward replacement of the factory-fitted equipment.  Bike-specific kits are now available for the Honda CBR600F, Kawasaki ZX-6R/ZX-10R, Suzuki GSX-R600/750, Triumph 675 Daytona and Yamaha R1/R6, among others, with prices from £105. Here's Venhill's description of the new product: "Manufactured with a robust CNC machined alloy body, the 888 fast action twistgrip provides a choice of two settings and is supplied with two rotors so that riders can select the throttle action that best suits the riding conditions.  Settings can be changed swiftly by undoing the two set screws securing the throttle body and changing the rotor. On the fastest setting there is 80° of rotation, (taking up 36mm of the cable), which is typically 45% faster than 'standard' throttles.