Find or Sell Motorcycles & Scooters in USA
  • 1974 Honda XR1974 Honda XR (1974)
    1974 Honda XR75Up for auction is a 1974 Honda XR75. Starts and runs as it should. The bike was torn down to the frame and partially restored by our service department.
    2016-08-11 04:48:02
    Williamsport, Pennsylvania, United States
    0
    5400
  • 1973 Honda XR1973 Honda XR (1973)
     For Sale Is My Amazing First Year Rubber Grey & Red 1973 Honda XR75 K0.  This XR75 Is Stunning In Its 99% Original Condition With Only A Rear Tire & Hand Grips Change.  This Is A Super Low Hour Bike.
    2016-06-18 04:45:57
    Choctaw, Oklahoma, United States
    100
    6200
  • 1973 Honda XR75 Beautifuly Restored to Original , Matching Numbers1973 Honda XR75 Beautifuly Restored to Original , Matching Numbers (1973)
    Up For Sale Is  A  1973 Honda XR75 Thi bike is completly restored to better than new All new engine  ,  top end  ,  clutch. engine #  XR75E- 1010312 All black componets like,     Frame , Swing Arm, Air Box, Triple Tree, Lever Perches,Seat Pan,  Footpegs, Motor Mount, Chain Guard, Have been sand blasted  Then Powder coated 60% Gloss Black Gas Tank has been Hot Tanked , Fenders, Side Plates & Gas Tank,   have been prepped  and  primed with PPG  epoxy primer   then  Color Coated  with PPG  Then 3 Coats of non yellowing High end PPG Clear Coat Perfect Original Kill Switch, Very Nice One Year Only Throttle Brand New After Market Very High Quality Seat;      Seat Cover has been made locally  with Heavy Duty Vynil ,   With Stenciled on Honda Logo,     New seat Foam On freshly Powder Coated Seat Pan  All hardware : Fender Brackets ,  Nuts and original,  perfect Bolts , Rear Brake Rod , Rear Brake Pipe,  has been hot tanked and Zinc Plated  New Parts :  Gas Cap , Fuel Stop,  Levers , Kick & Shift Rubber,   Grips,  Lever Dust Covers, Perch Plugs, Cables, Rubber Grommets Throughout, Spark Plug, Points, Valves, Piston& Rings, Gaskets,Air Filter,  Chain,  Spark Plug Wrench (under seat), New Front Number Plate, Decals, IRC Tires , Tubes, Rim Bands, Spokes, Rims,  Brake Shoes, Wheel Bearings & Seals,  Perch Bolts etc....................... All Aluminum has been High Polished :  Intake Manifold, Hubs,  Backing Plates, Fork Legs, Points Cover, Valve Cover, Re Chromed : Handle Bars, Kick Starter,  Shifter,   Front & Rear  Brake Arms, Cable Guide,  Asking 4500.   The least I have ever sold one was 4250.00  and the most was 5500.00   I am building 6 bikes for one customer now  and several to build and sell like this one and the flat track xr  I also haved a Beautiful 1975 YZ80 A    that is Excellent  Restored to Original Condition  That is ready to list I  also pictured a 1980 YZ80G  and a Z50A   That  I just finished for a customer "That are not for sale" "Buyer is responsible for all shipping and shipping cost" Shipping to Australia " Shipping Port" is 700.   with crate Ask for other shipping quotes and details   916 833 1857         
    2013-10-18 00:19:33
    Sacramento, California, US
    10
    4,500.00

Honda XR Price Analytics

Moto blog

Honda has applied for a European Vehicle Type Approval for a new model

Fri, 06 Aug 2021

Earlier this year, a Japanese company patented the name and layout of the new NT1100 model. A while later, renderings of what a sports touring car with the engine and transmission from the CRF1100 Africa Twin might look like appeared on the network. Since then, no new information about the appearance of the NT1100 has been leaked, but just the other day it became clear that the model will be presented soon.

Honda has unveiled the 2022 CRF450RX

Fri, 04 Jun 2021

There are no crutial changes, the manufacture's engineers, with the help of factory racers, were fine-tuning the motorcycle. As a result, the enduro CRF450RX, like the cross-country CRF450R, received a retuned electronic engine control unit, as well as recalibrated shock absorbers, which had a positive effect on enduro handling.

Honda has announced plans to go completely zero-emission

Sun, 30 May 2021

The company President Toshihiro Mibe said that Honda is committed to being completely carbon-neutral across all of its products. To do this, the company is expanding the range of electric vehicles and has also developed a standard for replaceable batteries Honda Mobile Power Pack.

Looking forward to the NX200 - Honda's new touring enduro

Thu, 06 May 2021

It will be a real adventurer, only a small one. The motorcycle will focus on the Asian markets. These isn't much information about the bike yet, but it is preliminary known that it will be built on the CB190 platform and will receive a single-cylinder engine with a displacement of 184 cc.

The other day, Honda patented the name and layout of the NT1100 motorcycle

Fri, 12 Feb 2021

The Africa Twin parallel twin will be installed in another chassis - an asphalt tourist one. Unfortunately, at the moment there are no official pictures, only the fantasies of fans and third-party designers. Only one thing is clear - the engine will be 1100cc, and just like the CRF1100 Africa Twin touring enduro and CMX1100 Rebel chopper, the engine will be offered with both a conventional motorcycle foot-shift gearbox and a DCT robot.

Honda has updated its flagship GL1800 Gold Wing tourer for 2021

Tue, 19 Jan 2021

There are no radical changes, improvements have affected parts of Honda tourers that are important for ensuring the comfort of the rider. In addition, new color and graphic schemes have appeared for the 2021 models. The Tour version has Gunmeatal Black Metallic and Candy Ardent Red.

Honda introduced the European version of the MSX125 Grom 2021 model year

Sat, 12 Sep 2020

The legendary microbike received an engine that complies with Euro5 standards and significantly upgraded looks. In addition, the MSX125 will now also be sold under its own name Grom on the European market. Honda Grom received an updated 125cc single-cylinder engine with 9.6 horsepower, aggregated with a five-speed gearbox instead of the previous "four-speed".

Honda will introduce the new CBR600RR later this year

Wed, 08 Jul 2020

There has been no official information from Honda about the new generation CBR600RR yet, but it became known that the 2021 model will echo the older Fireblade in terms of its exterior. The "Six hundred" will receive a "two-eyed" LED head optics, the air intake will be located in the middle. Winglets will be added to the fairing to increase downforce at high speeds.

Honda has patented a technical solution from the arsenal of the Gold Wing tourer.

Thu, 02 Apr 2020

The modern Honda Gold Wing is equipped with a double wishbone front suspension, which not only increases ride comfort, but also allows the geometry of the motorcycle not to change during acceleration and braking. Lever suspension, which stabilizes the bahavior, may appear on other models of the company in the future. This is hinted at by patent images of similar systems integrated into the design of completely different motorcycles - the “classic” CB1100 and the small-capacity C125 Super Cub.

Little brother: Honda introduced a "nano version" of the X-ADV scooter

Sun, 11 Aug 2019

The model is called ADV 150 and, despite its similarity with the X, it has nothing to do with it. The engine is a single-cylinder with a volume of 149.3 "cubes", developing 14.2 hp at 8500 rpm and 13.8 Nm at 6500 rpm. Suspension is a regular telescopic fork and two Showa rear shocks.