Bultaco All 0 Motorcycles

Used Lucas tail light lens for Bultaco Metralla Mk 2 or other. Has one tiny crack in bottom edge seen in third photo ( can be glued) otherwise great original condition. ( no cracks by mounting screws as they often get) Please examine pictures carefully as what you see is what you will receive.

Cash Paid! I am always buying vintage motorcycles and parts Fair prices paid, travel nationwide Description 6 3/4" on center 35 mm   Satisfaction Guaranteed! All parts listed as NOS are genuine ex-dealer stock and guaranteed NOS.

This is an extra swing arm that came with my 1978 Bultaco Pursang 370. Measures 20 1/2' from end of swingarm to center of pivot hole. 5th picture shows minor damage from chain, otherwise it looks to be in good condition.

Original not a reprintWill combine shipping7 pages

THIS IS A BRAND NEW AFTERMARKET BLUE FRONT AND REAR FENDER SET FOR THE BULTACO 198 & 199 250 & 350cc MODELS. WILL ALSO FIT SOME OSSA AND MONTESA MODELS. IN NICE SHAPE WITH NO DAMAGE.

Cash Paid! I am always buying vintage motorcycles and parts Fair prices paid, travel nationwide Description Horn does not work   Satisfaction Guaranteed! All parts listed as NOS are genuine ex-dealer stock and guaranteed NOS.

Cash Paid! I am always buying vintage motorcycles and parts Fair prices paid, travel nationwide Description From unknown make/model Bore ID is roughly 49.30 mm   Satisfaction Guaranteed! All parts listed as NOS are genuine ex-dealer stock and guaranteed NOS.

New old stock chain guide.

    ALUMINIUM ALLOY PETROL FUEL GAS TANK BULTACO PURSANG 360 + FILLER CAP @ ECspare Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description NEW ALUMINUM ALLOY PETROL FUEL TANK CAP WITH LOCKABLE CAP. The tank shown is custom made in India with aluminum sheet to exact specs of the original tank. The tank is supplied with a lockable filler cap, You cant fit a original cap of Bultaco tank on this.

A couple very tiny pit spots on the chrome but should polish up nice..By it's looks I am doubtful if this piece was ever mounted but probably just kicked around a garage for years..Pictures are accurate...Thanks..

Please Click Here to Check out My Other Items For your consideration is a 1970 - 1976 Bultaco Matador MK3 250 AHRMA MX Vintage Fuel Gas Petrol Tank All Parts were removed from a 1970 Bultaco Matador MK3 250 Frame # M260 Engine # M-2601615 I am not a Bultaco expert and can not guarantee all these parts to be original to this bike. Shipping is $34.99 in the Lower 48 US States via United States Postal Service. Hi/AK/PR/APO AP may be higher.

1970's original Bultaco kick stand in great shape. All sales are final. I only accept PayPal.

Hello - There are original tools from Bultaco. A very early and unique spark plug socket from an early 60's Bultaco kit. Auction is for all you see, no bag or roll.

solid with good hinge and snap

either matador 200 or Sherpa 250. engine ser. no.

lever and yoke

VINTAGE BULTACO EXHAUST SYSTEM WITH BOLT ON SILENCER. NOT SURE OF YEAR AND MODEL BULTACO THIS WILL FIT. 

You are bidding  on a used clutch cover   for a Bultaco Sherpa T 250.  Looks to be in ok used condition and  has some scratches see pictures.  Comes with everything you see in pictures. Please look at all pictures for more details.  These are used parts and I strive to describe as best of my ability if I miss something it is an honest mistake and will make it right.  Please email me with questions as soon as you can for I am on call for work and can go out of town at any time so I do not get to a PC everyday.   Payment must be received in full within 7 days of the end of the auction unless otherwise agreed upon. Please read entire description and ask any questions before bidding.

This is a brand new Wiseco piston. This is listed to fit 125cc Bultaco models. This includes the piston, piston rings, circlips and instruction sheet.

This Dunlop tire and 3 more are one I took off when new and are in like new condition.  No dry rot or cracking they have been stored properly for over 40 years. I have 4 total but one I will keep to go on my Bultaco Sammy Miller Replica.

Complete decal set collection for a Bultaco Metralla Mk2 includes tank decals, oil and storage tank, "made in spain" for fuel tank ( not shown), Betor decals, Akront decals, Oil stroke cards, Oil cc decals, etc. Some very hard to find. Includes all shown plus the Made in Spain one mentioned.

Up for auction are 4 vintage handlebars. Most likely from a Maico but could be from an AJS or Husky. I'm selling altogether because it's somewhat of a pain to find boxes to ship.

BULTACO CAMPERA MK2 175  FOR PARTS OR REBUILD, BILL OF SALE, SOLD AS IS. 1969-72 M2800300

Bultaco Alpina frame/swing arm 1973 250    I take PayPal  or a check (which would have to clear first.) Bid with confidence by checking my feedback out just click on the # next to kev_uk_usa

 Bultaco Exhaust Gasket...square...new   NOS OEM.  49mm diameter.  Old dealer stock.  I believe the part # is 11-17-001.  Kindly check photos.

BULTACO MATADOR  Fiberglass seat pan Vintage early 1970's Red fiberglass seat pan has 2 cracks in right side, 2 cracks and a chunk on the right side. ( Front part is cracked on both sides and down the middle and is barely hanging on. ) See pics Sticker on bottom: 277 See pics

Used OEM Chain Tensioner.  Kindly check photos.

The Buzzard continues to try and offer parts for bikes the others either don't have or don't care about! A new set of REAR Wheel bearings to fit most of the Bultaco models with drum brakes 1967-81.....you will get one set - enough to do one wheel...I also offer all kinds of other Bultaco & Vintage Bike Stuff...... shipping in the USA will be $3 - other Countries would be $8 thru the USA Mail Unlike Others - the Buzzard DOES consider himself an Expert in this area after working on Motorcycles / ATV's / Snowmobiles / Watercraft since the early 1970's - and his opinions are based on years of Professional and personal knowledge of what happens in Real World Use - so PLEASE Contact me with any questions you may have!....

Description: Off an early 70's Bultaco. Probably, Sherpa or Alpina. 3/4" diameter.

NOS OEM.  Only wear from shelf life.  240mm long; 14mm diameter;14mm thread.  Could fit other models.  Kindly check photos.

GOOD USED CONDITION  INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

Super cool and vivid vintage image of a bultaco alpina. printed with sublimation, won't crack peel fade or shrink. great gift for yourself or a vintage bultaco friend.

BULTACO MATADOR side cover Vintage early 1970's Some small chips and wear around edges No cracks that I can see, very solid nice part Has a 114 sticker on the back See pics

Description: Rusty but solid. Not sure of year. Pictures are part of the description please look at them closely and if you have questions or need more pics, let me know.

BULTACO STAINLESS STEEL PRIMARY FILLER CAP THIS IS A REPLICA OF THE PRIMARY CASE FILLER CAP AS USED ON LATER ALPINA ,SHERPA ,PURSANG ,MATADOR, LOBITO,ETC I OCCASIONALLY HAVE SECONDS AVAILABLE AT HALF PRICE , THESE MAY HAVE SURFACE MARKS OR DIMENSIONAL VARIATIONS BUT STILL BE SERVICEABLE , PLEASE INQUIRE . INTERNATIONAL P+H WILL DEPEND ON DESTINATION AND WHETHER INSURANCE IS REQUIRED . WILL COMBINE MULTIPLE ITEMS .

NOS  OEM.  Only wear is from shelf life.  275mm long..  17mm diameter.14mm thread.  Could fit other models.  Kindly check photos.

Part #  81-21-217.  Good condition.  Markings Femsa RSA1X-7.Kindly check photos.

You are buying one package of 3 new old stock plastic number plates. 3 number plates are in one package. They are the standard 10-1/2" wide x 8-1/4" tall number plate.

RUBBER Bultaco Sherpa handguards, frontera, Pursang, alpina, lobito... WE HAVE NEW PARTS FOR THIS BIKE BULTACO SPARK. We have over 4000 motorcycle parts SPANISH.

Description: Off an early 70's Bultaco. Probably, Sherpa or Alpina. Some corrosion but restorable.

Description: Off an early 70's Bultaco. Probably, Sherpa or Alpina. Hub had some corrosion.

Please Click Here to Check out My Other Items Up For your consideration is a 1972 Bultaco Alpina 350 AHRMA Vintage Front Axle Bolt All Parts were removed from 1972 Bultaco Alpina 350 AHRMA Vintage Frame #9900718 I am not a Bultaaco expert and can not guarantee all these parts to be original to this bike. Shipping in the Lower 48 US States via United States Postal Service. Hi/AK/PR/APO AP may be higher.

BULTACO CLUTCH ADJUSTER COVER SCREW , STAINLESS , NEW 25 X 1.5 THREAD THIS FITS IN THE THREADED HOLE OVER THE CLUTCH PUSHROD ADJUSTER IN THE MAGNETO COVER OF THE EARLY MODEL BULTACOS.  SUIT ,SHERPA ,MATADOR.METRALLA , PURSANG , ASTRO ,LOBITO ETC.  I  OCCASIONALLY HAVE SECONDS AVAILABLE AT HALF PRICE ,  THESE MAY HAVE SURFACE MARKS OR DIMENSIONAL VARIATIONS BUT STILL BE SERVICEABLE , PLEASE INQUIRE .

BULTACO STAINLESS STEEL GEARBOX FILLER CAP ,  1 OFF THIS IS AN EXACT REPLICA OF THE GEARBOX (AND PRIMARY CASE OF EARLY MODELS) FILLER CAP NORMALLY MADE OF PLASTIC. WILL SUIT ALPINA ,SHERPA ,FRONTERA ,MATADOR. PURSANG , ASTRO ETC.

For your consideration is a nice used ignition cover from a Bultaco Frontera MK10 model 180. The cover is in good condition overall but does show a small amount of chain rash to the tail of the cover and the back side of the flywheel opening seen in the pictures. There are no cracks, breaks or repairs in the cover.

NEW  INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

GOOD USED CONDITION  INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

After numerous requests - the Buzzard FOUND a NEW Throttle and Cable set-up to replace the old style Throttle and original cable for Bikes using the Bing 54 Carb...... A NEW Side Pull Style Twist Throttle AND cable for the Bing "54" carbs that are commonly used on Maico / Husky / CZ / Penton / Bultaco / KTM / Cagiva  and other Vintage bikes.... same one I used on my KTM when I replaced the original sticks-out-in-the-Breeze original set-up!...has a 45 degree bend where it exists the carb ( which I find helps guide the cable forward much more easily )...besides the usual adjustments at the throttle and carb - the cable has another adjuster in the middle section of cable itself as well!...the OUTER cable length is 42 inches with the adjuster all the way in  - and the inner cable is about 6.5 inches longer than the outer cable - it is pictured on a Maico 36mm Bing 54 which is NOT included Note: Not sure if this will work on the 40mm Bing carbs as the inner cable may not be long enough for those Giant carbs!

GOOD USED CONDITION .    INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

GOOD USED CONDITION . ALL FINS ARE GOOD    INTERNATIONAL BUYERS YOU THE BUYER ARE RESPONSIBLE FOR ANY TAXES OR DUTIES .

This Fiberglass gas tank came off a 1970 bultaco 250 m68 pursing,I am not sure how much it holds,abit more than stock,,has the cap ,both fuel valves,DG sticker,e mail any questions thks.

BULTACO PURSANG, FRONTERA N ALPINA, MATADOR AIR BOX TO CARBURETOR IF YOU NEED ADITIONAL PARTS PLS BELOW MY OTHER AUCTIONS, IF NOT CAN SEE PLS SEND A EMAIL. PLS VISIT MY STORE FOR COMBINED SHIPMTS. VINTAGE CLASSIC BIKES PLS SEND A MESSAGE BY PAYPAL N CONFIRM THE MODEL THAT YOU NEED, PHOTO 1 OR PHOTO 2

Any questions please ask. I ship worldwide. I do not take offers.

BULTACO PURSANG VINYL STICKERS (BOX20)They are NEW, FOR SEVERAL BULTACO PURSANG WE HAVE NEW AND USED PARTS FOR BULTACO MONTESA, OSSA, DUCATI, ETC ...SHIP OF SEVERAL PIECES, cheaper shared IN TWO PARTS SHIPPING OR MORE, VISIT OUR SHOP.WE ARE SPECIALISTS IN BULTACO, MONTESA, OSSA, Ducati Mototrans, VESPA MADRID, Lambretta EIBAR.MOTORCYCLES AND OVER 500 PIECES IN STOCK PERMANENT 20,000 !!!!!!!!MOTO SINCE 1987.OUR EBAY STORE IS: http://stores.shop.ebay.com/cienmotos

BULTACO PURSANG NEW MUFFLER SUPPORT. Measurements in centimeters, GOOD LOOKING YOUR BIKE BEFORE YOU BUY. SPECIALISTS IN SPANISH MOTO OSSA, MONTESA, BULTACO.

BULTACO SHERPA, MATADOR, ALPINA, CHAIN SPROCKET REAR ALUMINIUM ES, DE 52 Z, EARLY MODEL OF BULTACO. MEASURES CM, PLEASE CHECK THE WHEEL BEFORE PURCHASING. WORLDWIDE SHIPPING dispatched to combine With Other elements SEE OUR EBAY STORE: http://stores.shop.ebay.com/cienmotos THANKS FOR YOUR INTEREST.

I believe it is a MK3 or MK4 Matador tank or possibly Pursang. I got it on an older Matador and since have put correct tank on. No leaks, good threads, very restorable.

 This  side kick stand(note rusty) is off a 1975 ? Bultaco Alpina 250 frame # 6-13700512 motor # PM-13700512 (Not positive on the year and model on this bike but 1975 is the closest I found in my research) ( some parts will fit other years and models)I got this in  boxes and some parts are rusty and dinged  we look the parts  over and are  tested to the best of our ability and  the picture are actual pictures of parts you will receive and we try to describe them the best we can ( parts may fit other years and models) some parts may be broken down for ease of shipping We also have other parts  for this snowmobile, and others right or left is from sitting  on snowmobile  please check our other listings. more parts added often thanks you for looking and may GOD richly bless you and yours     *Please Note:  If there is ever a problem with a part please contact us and we will try and make it right, we strive for positive feedback and love to give the same.                                                                                           *We accept PayPal  **Unless the part was misrepresented in the listing, all sales are final.

BRAND NEW TAILLIGHT ORIGINAL PILOT BULTACO LOGO FOR ALL ROAD BIKES BULTACO MERCURIO, METRALLA, METRALLA MK2,TRALLA, METRALLA MK2, CAMPERA, ALPINA, ETC. BULBS NOT ARE INCLUIDED !!! YOU CAN FIND OTHERS PARTS BULTACO IN MY STORE: LIGHTS, ELECTRIC PARTS, LEVERS N PEDALS, AIR FILTER ELEMENTS, BODY PARTS, KIT DECALS, SHOCKS, EXHAUST PARTS, SPOKES N NIPPLES,CHAIN GUARD, KIT FENDERS, RUBBER PARTS ALL, ETC ETC.