-
2005 Custom Built Motorcycles Bobber (2005)
This bike is simply awesome to ride. Recent service done on this bad boy. Details are a hand tooled leather seat, Harley Davidson Controls, Harley Fatboy front end, 220 rear tire, custom metal, Ultima 6 speed, 4 inch open primary belt drive, HUUUUGE 130 inch Ultima engine that purs like a kitten.
2016-06-18 05:00:58
Pompano Beach, Florida, United States
2
6700
-
2009 Custom Built Motorcycles Bobber (2009)
2009 Detroit Bob are made by Percision cycle works custom paint overall condition of bike is it 9/10 250 rear tire Primo Riviera six speed primary S&S super carb great bike great shape hard tail with springer front end. 88 ci evo
2016-06-20 04:59:53
Gamaliel, Arkansas, United States
3
9,000.00
-
2010 Custom Built Motorcycles Bobber (2010)
If you are wanting a custom built motorcycle this Old School Bobber built by C&S Cycles and dubbed the “Black Widow” is one BAD ASS BIKE! Featured on the cover of Full Throttle Magazine with a 2 page center story, this is a one of a kind chance of a lifetime for a real old school biker that’s crazy enough to ride a bike like this!
I really don't even know where to begin describing this one-of-a-kind scooter. To start, I will say that I have never ridden or seen anything like this in my 59 year old life!
2016-06-21 05:05:37
Washington, Missouri, United States
300
11,500.00
-
1985 Custom Built Motorcycles Bobber (1985)
2016-06-22 04:59:24
El Paso, Texas, United States
29
19000
-
1979 Custom Built Motorcycles Bobber (1979)
I am selling my 1979 harley bobber. This is a running and driving bike that needs nothing but a rider. It is pretty good looking and there are no bikes around that look like it.
2016-06-22 04:59:27
Gardner, Massachusetts, United States
999
7400
-
2006 Custom Built Motorcycles Bobber (2006)
This bike has been well maintained, filters and fluids replaced every year, I've owned it (3 years), replaced primary seals, new battery as of last year, new speedometer (approx. 5000 miles), rebuilt carburetor, re-jetted (came from HI to MT), and is a real head turner. I am only selling to start a family and won't be riding much.
2016-06-23 04:57:37
Billings, Montana, United States
5
8,500.00
-
2007 Custom Built Motorcycles Bobber (2007)
This bike is a must see with only 214 miles. just built and put on a shelf i start it up once a month keep the battery and gas fresh
2016-06-23 04:57:45
Huntingtown, Maryland, United States
214
4,500.00
-
2004 Custom Built Motorcycles Bobber (2004)
A completely rebuilt 74 cubic inch iron head sportster. Motorcycle runs great. I purchased this bike as a basket case in 2002 and spent 2 years putting it together.
2016-06-24 04:57:11
New Bloomfield, Missouri, United States
100
23000
-
2015 Custom Built Motorcycles Bobber (2015)
MALIBU MOTORCYCLE WORKS
818-300-4299
ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO)
WE SHIP WORLDWIDE
WE STOCK OVER 70 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION
TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD
PLEASE CALL OR E-MAIL ME WITH ANY QUESTION 818-300-4299 MIKE SIMS
WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION
MADE IN THE USA
FITS 1977-2003 SPORTY , OR 1990-2002 BUELL ( NOT BLAST MODELS )
2015 SUPER FUNK 250 SPORTSTER / BUELL BOBBER RIGID ROLLING CHASSIS SET UP FOR CHAIN , , 40 DEGREE RAKE ,4 INCH BACK BONE STRETCH, 0 UP STRETCH ,, 250 RIGHT SIDE DRIVE, ,, , OIL TANK UNDER MOTOR ,SPRINGER FRONT END (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL), 18X8.5,26X3.5 FAT SPOKES WHEELS WITH BILLET HUBS . AVON FRONT AND REAR TIRE , REAR FENDER (REAR FENDER SUPPORT ALSO INCLUDED ,) ,, NEW BEARINGS AND WHEEL SPACERS, , CUSTOM GAS TANK (SEVERAL TO CHOOSE FROM) , , RAPED APES BARS,NECK CUPS , RACES , WHEEL SPACERS
NOTE :THE SHEET METAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL
. THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW .
2016-06-28 04:59:50
Thousand Oaks, California, United States
0
4,800.00
-
1975 Custom Built Motorcycles Bobber (1975)
Year: 1974
Model: Iron Head
Builder: FD Motorcycle and Customs
Displacement: 995.7cc
Carb: S&S Shorty
Air Cleaner: S&S
Exhaust: Straight Pipes
Transmission: Right side shift 4 speed
Frame: 1974 Custom Hardtail Rake 38 Degrees 4" Stretch
Wheels: Front Wheel Size 21" 40 Spoke Rim Tire is an Avon Speedmaster
Front Brake: N/A
Rear Wheel: Stock H-D Size 16" Spoke Tire is a Shinko 130/90-16
Rear Brake: Drum H-D Stock
Paint: Color Gloss Black Engine: Satin Black
Accessories: Foot Controls & seat built by FD Motorcycle and Customs. Rear fender ribbed 5" wide. Tail Light Brass by FD Motorcycle and Customs.
2016-06-30 04:51:32
Fort Dodge, Iowa, United States
1
16000
-
2006 Custom Built Motorcycles Bobber (2006)
I'm listing this motorcycle for a friend, and storing/showing in our showroom.
Concord Trailer World -Polaris
1124 Caven Way Concord
Concord, CA 94520
and/or
Concord Garden Equipment
2451 Monument Blvd
Concord, CA 94520
925-682-9777
Call and talk to Kevin or Mike
Originally Featured in Easy Rider Magazine in 2007 as well. If it's not painted or powder coated than it's been nickle or brass plated. Every single piece of this motorcycle was meticulously though after and kept up.
2016-07-01 04:57:37
Concord, California, United States
4
16,990.00
-
2014 Custom Built Motorcycles Bobber (2014)
Brand New, recently finished Custom Digger bobber. Built by award winning Brass Balls Cycles. Featuring an S&S V-111 motor, Rivera 6 speed transmission and BDL primary belt drive. The chassis is 0" up and 0" out with 34 degree rake.
2016-07-01 04:57:38
Oklahoma City, Oklahoma, United States
11
33,995.00
-
2010 Custom Built Motorcycles Bobber 2010 CUSTOM BUILT BUELL BOBBER *WE SHIP* (2010)
Dream Machines Indian Motorcycle
Visit Store
1401 N. Interstate 35
Round Rock, TX 78664
Contact: Our Sales Team! Phone: (512) 309-7503 ext.5
Email: sales@dreammachinesofaustin.com
Vehicle Information
VIN
FLA63818
Condition
Used
Odometer
1
Stock No
A63818
Warranty
Unspecified
Engine
Buell Thunder Storm
Transmission
5-SPEED
Exterior Color
Black
Interior Color
Flat Black
Loan Calculator
2010 Custom Buell Bobber
Description
*AS COOL AS IT GETS*
YOU ARE LOOKING AT A 2010 CUSTOM BOBBER (BIKE DOES NOT HAVE ODO OR SPEEDO SO IT WILL BE TITLED AS NOT ACTUAL MILEAGE).
2016-07-01 04:57:41
Round Rock, Texas, United States
1
8,950.00
-
2013 Custom Built Motorcycles Bobber (2013)
Any question feel free to call/text 713-859-1987.
2013 Bobber, Pro Built, Redneck EngineeringFrame: Redneck Engineering Mutant Name: Bob This Engine: Buell S1 White Lighting 1203 cc Engine Color: OD green and Gloss Black Paint (military style).
Check out redneckengineering.com and you will see the base price on this bike is $22,995.00 with no options or upgrades like I have below. Many custom parts on the bike were built only for this bike. This is a very cool bike and gets attention every time it hits the street. 105 hp and light weight for a chopper so its fun to ride.
2016-07-03 05:00:48
Cypress, Texas, United States
3
33000
-
1991 Custom Built Motorcycles Bobber (1991)
Brand new custom motorcycle built by Pete Minardi of Precision Motorcycles. Titled as a 1991 Harley Davidson. Modified chassis 34 degree rake.
2016-07-08 04:58:24
Clifton, New Jersey, United States
140
25665
-
2010 Custom Built Motorcycles Bobber (2010)
2010 Custom built Bobber, never used, show room condition from private collection. Great show bike, real head turner, loud and fast
Video of bike available upon request. Shipping, Not included in price.
2016-07-08 04:58:24
Staten Island, New York, United States
212
14000
-
1993 Custom Built Motorcycles Bobber (1993)
I am a private builder from Sarasota FL. I have 5 class wins at Thunder on the Bay Sarasota FL,5 class wins at The Boardwalk show Daytona FL, 3 class wins at Florida Bike Builder's Expo,3 class wins at the Rat's hole, 6 Bike's in Barnett's online magazine and have a bike on the cover of April's 2016 of Easyrider's & V-Twin Magazine, The reason I say these thing's is to let you know this is not my first rodeo.Now about the bike.This bike is all ready a proven winner and is very rideable it was a 1993 883 that has a 1200 kit in it.It is a ground up split case build 1200 kit,valve job,S&S Super B,Points. All the outer case,s are powder coated as well is the frame and front end.
2016-07-09 04:54:02
Sarasota, Florida, United States
200
30000
-
2006 Custom Built Motorcycles Bobber (2006)
Selling my sweet 2006 custom victory Vegas. The back end has been cut off and a hammer backend put on to hold a 260 rear tire also have aftermarket exhaust and air breather. Bike runs super strong loud and fast.
2016-07-09 04:54:05
Republic, Missouri, United States
19
32000
-
2016 Custom Built Motorcycles Bobber (2016)
Custom build by Dos Homdres Cycles. Paint by Viking Cycle Art. Inc.
2016-07-12 04:56:55
Ocala, Florida, United States
1
12,000.00
-
2008 Custom Built Motorcycles Bobber (2008)
Completely one of a kind custom bobber featuring a 127" Ultima motor. Custom Exhaust, Pingel fuel valve, mini-apes, Coker 5" tires (front and back), a pitot tube off a Cesna (does not serve any real purpose on the bike but looks cool), compression release valves. Billet tail light and head light.
2016-07-14 05:05:57
Chicago, Illinois, United States
1
14,000.00
-
2016 Custom Built Motorcycles Bobber (2016)
Up for sale is a freshly built Kraft Tech Rigid. I purchased the bike nearly completed and did the entire build all over again ensuring everything was done the correct way with the appropriate parts. The bike has never been titled because the previous ownership never had completed it.
2016-07-15 04:55:09
Punxsutawney, Pennsylvania, United States
500
35000
-
1980 Custom Built Motorcycles Bobber (1980)
you looking at a 750cc suz,bobber custom built it has new white wall tires it starts right up and runs and drives great it is really for the road,thanks for looking and good luck bidding,,,
2016-07-15 04:55:13
Saginaw, Michigan, United States
500
6834
-
1979 Custom Built Motorcycles Bobber (1979)
1979 Harley Davidson FXEF bobber All new everything Completely custom built in Los Angeles California
On Jul-15-16 at 00:39:45 PDT, seller added the following information:
Video of bike:http://youtu.be/eqAm5c412S8
2016-07-15 04:55:16
Houston, Texas, United States
0
20000
-
2016 Custom Built Motorcycles Bobber (2016)
BUILT BY RODS AND RIDES BY TD ST LOUIS, MO. Rods & Rides is not just a brand name, it's a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA. The brand is a very well known name in the national motorcycle shows, magazines, and several TV channels but that's not where is stops.
2016-07-16 04:54:27
Minneapolis, Minnesota, United States
250
23,500.00
-
1979 Custom Built Motorcycles Bobber (1979)
ESTATE DEAL, clear california title,been stored for less than a year,the bike was jump started,added fuel,Fired right up,idle fine,drag exhaust has nice sound,New engine was replaced less than 50 miles,owner was building the bike,needs some minor items for completion,battery may need replacing or completed charging,seat has small rip...needs complete servicing and safety check before highway riding,,,being sold as is.Being sold for much less than has been invested into the bike...International buyers are welcome, we will work with all shippers and can provide shipping quotes
2016-07-16 04:54:32
Yuba City, California, United States
50
3,500.00
-
2014 Custom Built Motorcycles Bobber (2014)
AZautorv.com 320 S El Dorado Suite 4, Mesa, AZ 85202 888-621-8889
2014 Johnny Pag Ventura
VINL8YPDRLG7EY000118
ConditionUsed
Mileage4
Fuel TypeGasoline
TransmissionManual 5-Speed
Exterior ColorRed
Stock Number000118-1
Address:
320 S El Dorado Suite 4
Mesa, AZ 85202
View Map
Phone888-621-8889
This eBay Listing Template is created by Carsforsale.com. Call 1-866-388-9778 to find out how Carsforsale.com can service your dealership.
2016-07-17 04:53:48
Mesa, Arizona, United States
4
1,899.00
-
2016 Custom Built Motorcycles Bobber (2016)
MALIBU MOTORCYCLE WORKS
ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO)
WE SHIP WORLDWIDE
WE STOCK OVER 45 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION
TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD
PLEASE CALL OR E-MAIL ME WITH ANY QUESTION 818-300-4299 MIKE SIMS
WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION
MADE IN THE USA
2016 MMW FATSO ROLLING CHASSIS, EXILE STYLE FAT FRONT TIRE BOBBER , RIGID ROLLING CHASSIS SET UP FOR EVO OR TWIN CAM A , 30 DEGREE RAKE ,0 INCH BACK BONE STRETCH, 0UP STRETCH ,, LEFT SIDE DRIVE , ,, , OIL TANK/BATTERY BOX , BLACK SPRINGER FRONT END (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL), 16 FRONT WITH 150 TIRE ,16 REAR WITH 200 TIRE, WIRE WHEELS WITH BILLET HUBS AND STAINLESS SPOKES ( CHROME, BLACK , RED AND HARLEY ORANGE AVAILABLE ). AVON TIRES , REAR FENDER ,, NEW BEARINGS AND WHEEL SPACERS, , CUSTOM GAS TANK (SEVERAL TO CHOOSE FROM) , , RISER, SUPER MX BARS (APE HANGER NOT INCLUDED WITH THIS AUCTION)
NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL
. THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW .
2016-07-19 04:50:22
Thousand Oaks, California, United States
0
3,900.00
-
2015 Custom Built Motorcycles Bobber (2015)
Jeremy Coon (888) 467-2410 9803 North Hwy 301 Wildwood Florida 34785
15 Demon Bobber
Vehicle Information
Year: 2015
Make: Demon
Model: Bobber
Condition: used
1 of 12 View Large Images
Description
CUSTOM SPRINGER BOBBER!! SPRING SEAT, MINI APES, CUSTOM FOWARD CONTROLS, CHROME CALIPERS, AND MORE!! FINANCING RATES STARTING AT 3.64% FOR 75 MONTHS!!
2016-07-19 04:50:24
Wildwood, Florida, United States
349
6,500.00
-
2010 Custom Built Motorcycles Bobber (2010)
THIS IS A SWEET CUSTOM BOBBER WITH AN 80 CUBE EVO ENGINE SLIGHTLY WARMED OVER WITH A CAM AND A SUPER E CARB, RUNS LIKE A TOP AND RIDES GREAT! FRAME IS POWDERCOATED IN HAMMERTONE CHARCOAL AND THE TANK AND FENDER ARE WRINKLE FINISH BLACK. THIS BIKE GETS THUMBS UP AND COMMENTS EVERYWHERE IT GOES AND JUST HAS A BAD ASS COOL LOOK TO IT!
2016-07-20 04:56:56
Lewiston, Idaho, United States
500
19003
-
2016 Custom Built Motorcycles Bobber (2016)
Custom built bobber, 96 inch shovel with 6 speed trans. Too much to list , please call or text Scott for all info. 317-395-4011Delivery is available Built by capones street rod motorcycles
2016-07-21 04:56:49
Shelbyville, Indiana, United States
200
14,000.00
-
2014 Custom Built Motorcycles Bobber (2014)
2014 drop seat bobber with fresh and completely dry 1981 1000cc Ironhead motor that runs like a champ. Motor was kept original looking as possible with OG black lower jugs and clear coated uppers. Super E carb, Dyna coil, BIG 2 into 1 custom exhaust with heat wrap that sounds great with no popping or backfiring.
2016-07-21 04:56:53
1
21000
-
2006 Custom Built Motorcycles Bobber (2006)
For sale 2006 custom built bobber, clean bike low miles, always garage kept, never dropped or wrecked, small paint chip out of the front fender little discoloration on the pipes few nicks on the two front forks, average wear and tear on a 10 year old bike. Bike looks good and runs great with a 110 cubic inch Rev Tec engine. Straight short exhaust pipes so it's a little bit on the loud side.
2016-07-21 04:56:56
Springdale, Arkansas, United States
3
9,500.00
-
2013 Custom Built Motorcycles Bobber (2013)
I'm selling my 2013 bobber built by Revolutions Speed & Customs Inc. This bike still has the original builder title and has never been titled in anyone's name. I honestly purchased the bike to flip. I'm getting married in October and I'm using the money to help pay for that. When I purchased the bike, it wasn't in running condition. The gas smelled like paint thinner. The bike had been sitting for a long while and I bought it without being able to hear it run. The previous owner just let it sit in his garage, it never even had a license plate mounted to it. I got it running after a gas tank flush and going through the carb.
2016-07-22 05:07:00
Mauldin, South Carolina, United States
0
9,000.00
-
2008 Custom Built Motorcycles Bobber (2008)
2008 Leroy Thompson Bobber named "Trendkill". This is a one of a kind, custom motorcycle. 23" front wheel with dual perimeter rotors.
2016-07-24 04:59:28
Powhatan, Virginia, United States
500
25,000.00
-
2008 Custom Built Motorcycles Bobber (2008)
2008 Sucker Punch Sally with a 80" EVO, Springer Front End, Sprotor, and many other custom accessories. This bike is a head turner and has won numerous trophies in the rat class. I have had absolutely no issues with this bike and it is very quick and nimble.
2016-07-24 04:59:29
Bentonville, Arkansas, United States
0
9,500.00
-
2007 Custom Built Motorcycles Bobber (2007)
Up for sale is this beauty! Owned for approx 3yrs now, title in hand. I just don't have time to ride due to summer being my very busy season.
2016-07-25 04:57:24
Omaha, Nebraska, United States
999
12,000.00
-
1975 Custom Built Motorcycles Bobber (1975)
Bobber motorcycle. 75 Honda 750cc. Amen frame, ape hangers, solo seat, custom front back fenders, brand new battery, Maltese cross tail light, drag pipes, chrome engine guards, lots of chrome parts.
2016-07-26 04:59:00
Johnston, Iowa, United States
15
35000
-
2007 Custom Built Motorcycles Bobber (2007)
2007 Custom Built Bobber. Has springer front end with 16" ape hangers. Bike also has Harley Engine, 88B with Mikuni carb and a Total Performance Transmission.
2016-07-30 04:57:03
Champlain, New York, United States
1
34000
-
1996 Custom Built Motorcycles Bobber (1996)
1996 Harley Davidson Custom Bobber
Great looking custom bobber. I did not originally build this bike, but did take it down to the frame, and re-build it back to what you see, after I acquired it. The frame is now a rigid sportster, which was stripped and powder coated. The tins are also all powder coated the same color as the frame, which is a dark cherry color. I do have a front fender, to go with the bike, just don’t have it on in the pictures.
2016-07-30 04:57:06
Bradenton, Florida, United States
3
7,300.00
-
2010 Custom Built Motorcycles Bobber (2010)
selling a custom bobber from billy the kid customcycles, has a 2010 missouri spec contruction title (clear) bike has maybe 2000 miles on it, transmision is out and needs repaired or relaced. has a 110 revtec exotic motor to look like a knuckle head. has a 3 inch open beltdrive that will come with it.
2016-07-31 04:55:32
Saint Louis, Missouri, United States
2
23000
-
2011 Custom Built Motorcycles Bobber (2011)
Bike is titled as a special construction. The frame is a harley hard tail frame with a bit of rake in the neck. The engine is a 96 cu inch generator shovel with std cases and s and s flywheels.
2016-08-02 05:04:05
Hollidaysburg, Pennsylvania, United States
5
9,750.00
-
2011 Custom Built Motorcycles Bobber (2011)
Up for Sale is a 2011 Sally Sucker Punch Roller. I removed:
Wiring Harness
Engine/Trans/Chain/Sprocket
Battery
Forward and Hand Controls
Brakes
Any Questions
Call or Text 717-736-9984
2016-08-03 04:57:14
Jonestown, Pennsylvania, United States
2
10000
-
2006 Custom Built Motorcycles Bobber (2006)
2006 Flyrite Bobber, 96" Fully polished S&S Superstock billet motor and gear case, S&S Super E carb, 3" BDL open primary with quite clutch and O-ring chain drive final, 5 speed ultima tranny. Front end in a polished Narrow glide, evo softail brakes front and back, tires are like new. This bike is a factory titled and insurered, no worries of "custom" titling troubles.
2016-08-03 04:57:16
Butler, Pennsylvania, United States
123
5500
-
1999 Custom Built Motorcycles Bobber (1999)
100 cubic inch Ultima motor, 5 speed transmission, 15 inch ape hangers, 21 inch front wheel, custom paint, lots of chrome. Pick up only. Located in Cave City, KY
2016-08-04 04:55:23
Cave City, Kentucky, United States
1
6,500.00
-
2009 Custom Built Motorcycles Bobber (2009)
2009 custom bobber,this bike has a 96 Harley ,1200 Evo motor with Buell generation 1 heads.Harley 5 speed tranny.she's mounted on a 09 fly rite bobber frame.s&s shorty carb,mini apes,with Bidwell grips.custom 105mm anti aircraft shell for a oil tank!oil cooler, new tires.beautiful root beer paint by house of colors.fast,fun bike,call with any questions, thanks 941-380-1793
2016-08-05 04:55:46
North Port, Florida, United States
5
9500
-
2008 Custom Built Motorcycles Bobber (2008)
2008 custom built bobber with a 100ci Rev Tech motor,open primary,240 Metzeler rear tire and attachable rear passenger fender with passenger pad. The bike has around 100 hours on it and all fluids have been changed
2016-08-08 04:57:27
Keller, Texas, United States
500
31000
-
2007 Custom Built Motorcycles Bobber (2007)
SRK Cycles | 155 E. Sun Hill Rd. Manheim, PA 17545 | (717) 395-8892 | www.srkcycles.com
Detailed Walk-Around Video
Commentated Test Drive Video
2007 Custom built Bobber
Who We Are
Not computer savvy?
2016-08-10 04:57:34
Manheim, PA, United States
7
7,300.00
-
2006 Custom Built Motorcycles Bobber (2006)
BIG RED
Harley Davidson late model Springer front endHarley Davidson 80 cubic inch evolution motor Harley Davidson 5 speed gear setHarley Davidson hand controlsCV carbK&N air filter Perf-form oil cooler & filter Vance & Hines Pro Pipe modified and ceramic coated JIMS transmission polished aluminum case5 speed kicker conversionBDL 3" belt driveAir Ride seat with on board compressorHarley Davidson police seat 23"x3.75" 60 spoke front wheel Avon Venom-R 130/60R23 tire18"x8.5" 60 spoke rear wheel Avon Venom-R 250/40R18Performance Machine chrome 4 piston rear brake caliper Harley Davidson Springer front brake 12" custom Stainless Steel Apes 250 series frame powdered coated gloss black 5 plus gallon fat bob gas tanks Paint candy red with underlying ghost flames on tank and rear fender Springer painted to match Dyna S electronic ignition Dyna S matching coilBike has title
Bike will come with complete wiring diagram along with starting instructions
Fast and Fun riding rigid, the air ride makes for a smooth ride, have other bikes that need finishing, has been my primary bike for the past 8 years, turns heads everywhere I go. Stand out and have something a bit different from the rest.Everything used to build this bike was and is qualityIf you are still reading then well you know.Happy bidding and please tell your friends Thanks and keep the shiny side up
Built and fabricated in the USA
Will help with shipping arrangements
2016-08-11 04:59:29
North Branch, Minnesota, United States
5
24000
-
2006 Custom Built Motorcycles Bobber (2006)
Covington speed demon hardtail bobber with chrome springer front end,114ci polished TP engineering motor,Baker 5 speed transmission & BDL belt drive.Motor puts out 113hp & 121ft.lbs torque,makes over 100ft.lbs of torque at 1700rpm.Bike has under 3200 miles on it & is in excellent condition except for some paint failure around the gas cap.These bikes came with a sportster style gas cap that vented from the underside onto the paint,it has been replaced with a covingtons tri-bar spinner cap that is vented on top to prevent this from getting any worse.The bike is VERY fast & not for newbie riders,it gathers an insane amount of attention where ever it goes.These do not come up for sale often & I looked a long time before finding this one,I am offering this at a very low opening bid because I have an opportunity to buy a car that I have always wanted from a friend of mine,so I am only going to list this a couple of times & if it doesn't sell I will gladly keep it.
2016-08-16 04:58:09
Gardnerville, Nevada, United States
3
24000
-
2012 Custom Built Motorcycles Bobber (2012)
NO RESERVE
Info:
This is a practically new Custom Bobber built at Southern Motorcycle, Inc with a CLEAR State Title. Not a garage built or personal built custom, we built it here in our facility by certified technicians, and titled in the state of Oklahoma. The parts used to make this bike are 90% USA made from Leading Manufactures, and we listed the major parts below.
We used this motorcycle mainly as a advertisement and display bike for our wheels, rotors, forward controls, and engine. It has less than 500 miles on the bike. We are putting it up for auction because we have new projects and advertisements we are doing.
The value of the bike is estimated at above $20,000, but we are auctioning it off with NO RESERVE
Here is a parts list:
Kraft-Tech Frame 28 degrees with FXR swingarm (USA)
127ci Southern Proof Engine with S&S Carb (USA)
3" BDL Open Belt Drive (USA)
Terry Components starter (USA)
6-speed AU Transmission (Korea)
Progressive Rear Shocks (USA)
GMA Controls (USA)
HHI Brake Calipers, brackets, and HW (USA)
Goodrich lines and cables (USA)
USA made leather seat, dash cover, and grips (USA)
Southern Black Contrast Octane Wheels, rotor, and sprocket (USA)
Southern Black Contrast Forward Foot Controls (USA)
Midwest Front End forks and trees (Taiwan)
Avon Tires 150/18 front and 200/18 rear (USA)
Dakota Digital Speedo and pick-up (USA)
USA made wiring harness (USA)
Two tone Black Paint (gloss on the bottom and matte black on top and sides)
How it Rides:
The motorcycle rides great (probably the best custom we have rode). It sits low to the ground, but handles good on corners, but does not lean like a Softail or Sporster. It has beyond enough power, maybe too much.
Condition of Motorcycle:
We guarantee everything is in good working order at the time of purchase with NO DAMAGE. As with any custom bike, it is like owning a race car, just requires more maintenance and up keep. The motorcycle is sold as is only. If you ever need parts, they are easy to find or you can get them through Southern Motorcycle, Inc.
2016-08-16 04:58:13
Ardmore, Oklahoma, United States
500
23000
-
2016 Custom Built Motorcycles Bobber (2016)
A beautiful machine you will get the looks and the questions where ever you ride to.Way to many extras to list must see to appreciate
2016-08-17 04:56:38
Nampa, Idaho, United States
100
13,500.00
-
2016 Custom Built Motorcycles Bobber (2016)
RODS & RIDES DROPSEAT BOBBER
The Dropseat Bobber is our #1 Selling Motorcycle for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The seat sits twenty inches off the ground and allows the rider the true dropseat feel.
2016-08-18 04:53:57
Saint Louis, Missouri, United States
1
27,995.00
-
2007 Custom Built Motorcycles Bobber (2007)
Custom Dyna Bobber, built over the last year. Over 14k in this build, all parts used are high quality new parts. Has 103 engine upgrade with performance cam.
2016-08-18 04:54:00
Huntington, Texas, United States
9
31000
-
2016 Custom Built Motorcycles Bobber (2016)
RODS & RIDES DROPSEAT BOBBER
The Dropseat Bobber is our #1 Selling Motorcycle for the last 7 years... With that being said, its not only the style of the machine with its unique flowing lines but also the seat, hand, and foot position that truly lets you be a part of the machine. The seat sits twenty inches off the ground and allows the rider the true dropseat feel.
2016-08-18 04:54:00
Saint Louis, Missouri, United States
1
27,995.00
-
2009 Custom Built Motorcycles Bobber (2009)
Up for sale is my custom 2009 bobber. This is a kit bike by Southern Motorcycle Works which sells for $11k new. It's a hardtail with a 100" ultima v twin, ultima 6 speed transmission with a BDL 3" open belt drive.
Springer front end, disk brakes front and rear, no gauges.
2016-08-22 04:54:09
Lake Stevens, Washington, United States
3
5,800.00
-
1975 Custom Built Motorcycles Bobber (1975)
Custom hardtail frame. Cbr front suspension, front and rear disc brakes. Vintage 60's tank, cleaned and lined.
2016-08-22 04:54:11
Kannapolis, North Carolina, United States
0
15000
-
2005 Custom Built Motorcycles Bobber (2005)
CUSTOM BUILT RAD BOBBER WITH THE S&S SIDEWINDER MOTOR. THIS RIGID FRAME CUSTOM HAS EXCESS AMOUNT OF POWER AND EQUAL AMOUNT OF BREAKING WITH LARGE DISC SETUP FRONT AND REAR. THIS S&S MOTOR IS AT LEAST 107" AND MAYBE 113" AND IS SUPER STRONG...
2016-08-22 04:54:19
Houston, Texas, United States
3
22000
-
1999 Custom Built Motorcycles Bobber (1999)
90HP 03 trans up grade, 9.0 compression, 402 cams, started as V92c motor & trans built by Kevin cross a well know victory teck in fl,
bike built an assembled by thunder struck victory customs (Danny) was a 2009 southeastern victory rally raffle bike for victory junction gang origination, show bike /bar hopper fun to ride & show many tropheys!! my bad back is making me sale her, grandkids named her LITTLE SISTER. compared to my 09 kingpin at the time.
2016-08-25 04:58:43
Columbus, Georgia, United States
450
10,000.00
-
2016 Custom Built Motorcycles Bobber (2016)
RODS & RIDES MOTORCYCLE COMPANY
SAINT LOUIS, MISSOURI USA
SPECIAL ORDER, PLEASE ALLOW 8-10 WEEKS FOR COMPLETION
RODS & RIDES 330 TRIKE CHASSIS
SPRINGER FRONT END
BLACK OR CHROME SPOKE WHEELS
FAT BOB SPLIT TANKS
TWO TONE PAINT OR MONO WITH PIN STRIPES
EL BRUTO EVO ENGINE
6 SPEED TRANSMISSION
DUAL 4 PISTON BRAKES
3.35" OPEN BELT DRIVE
TOLL FREE: 855-ROD-RIDE
2016-08-26 04:57:36
Saint Louis, Missouri, United States
1
34,995.00
-
1999 Custom Built Motorcycles Bobber (1999)
1999 custom yamaha vstar 650 bobber/cruiser, powder coat wheels, pipes,tank, custom seats. back seat comes with the bike runs great. for sale as is.
2016-08-27 04:51:47
Union City, New Jersey, United States
5
4,500.00