Bobber Bobber Motorcycles, page #3

I have here a suzuki s50 that I bought new in 2007 and am the origional owner of. Theese bikes make awesome bobbers! look at the internet and you will see great examples.

Custom Harley Rigid Bobber- Professionally built- Kraftech frame, 80'' Evo style motor with a mild cam,Built on S@S cases and every thing else Harley OEM parts. Super E polished carb. 5 speed tranny linked to a BDL 3'' open belt.

2011 Custom Bobber 117 Mile Gray Powder Coat 200 Wide Tire Chromoly Frame ALL TIG Welded and USA Made 34 Degrees of Rake & 4" DT Stretch 107" SMW, Inc Nat Panhead 5 Speed Nat "Kicker" RevTech Transmission 60 Spoke Chrome Wheels or optional SMW, Inc. Billet Wheels SMW, Inc. Knuckler 3 3/8" Open Belt w/ Outer Bearing Support Custom Bobber Gas Tank, 9" High-Grade Steel Rigid Rear Fender Santee Chrome Shorty Pipes Black Leather Solo Seat 16' Chrome Ape Hangers Thunder Heart Wiring Harness and Electrical Chrome Front Headlight and Tail Light assemblies SMW, Inc.

CUSTOM BOBBER This is the latest build at FLYINEYEBOBBERS . Custom metalflake paint 12 inch apehangers Diamond tuck solo seat Hardtail Low & Loud Custom wrapped pipes Side mounted tail light   Call 336-469-2188

You are bidding on a very complete rolling chassis in excellent condition. I am the original owner, and primary builder. It has very low mileage because it was constructed to showcase the Keck 120 billet motors (which I also built), and was used at trade shows and events.

I have up for sale a 1994 sportster I chopped awhile back.It doesn't have the standard sporty hardtail you can purchase for it.I grafted a OIF Triumph hardtail onto it to give it a very narrow profile.I built a good deal of parts for this bike including the nacelle,exhaust,handlebars,etc.the bike also has two 19'' wheels with new tires(less than 200 miles on them).The top end was rebuilt at a Harley-Davidson dealership with new jugs pistons and pushrod tubes.The bike is very dependable as i have rode it on multiple trips with no issues and rode it back and forth from work as a daily driver.The only thing is it leaks a little.And has signs of typical wear for a bike that is ridden.I have a clear florida title in hand.Thanks for looking. Parts list: David bird OIF Triumph hardtail,19'' 9 spoke mags,Michelin commander II's,Crane cams HI-4 ingnition module,H-D black LED light,Chain conversion,Redtail leather seat,powdercoated parts.Not a huge parts list,I tried to keep the bike as simple as possible.It only got what it needs to shoot down the road. I built this bike in my garage,I enjoyed building it and have enjoyed riding it even more.I have a slew of projects so im selling to fund my other toys.If your interested place a bid.

       Rods & Rides Motorcycle Company This sale is for a new 23" Boardtrack Racer Motorcycle order. The order will be ready for delivery within 6-8 weeks.  The motorcycle can be either delivered at our facility or shipped anywhere within the United States for $595.00 We are the only Drop Seat Bobber manufacturer licensed in all 50 states including New Jersey. We are also able to export to Canada and we are on the Australian registry.

       Rods & Rides Motorcycle Company This sale is for a new 300mm Drop Seat Bobber Motorcycle rolling chassis.  The frame can be either delivered at our facility or shipped anywhere.  (Wheels in pictures are available at extra cost) " SALE INCLUDES " - 300mm Dropseat Frame - Oil Tank W/ Cap - Rear Axle - Battery Box - Seat Mount - Rear Fender (Mounted) - Chrome or Black Springer Front End - Mini Ape Hanger Handlebars - Handlebar Risors - Traditional 60 Spoke Wheels (Chrome)  - 90/90-21 Avon Tire & 300/35-18 Avon Tires - Peanut Fuel Tank (Mounted) - License Plate / Taillight Mount - Forward Control Foot Mounts - Certificate Of Origin & 17 Digit VIN Stamped  **Please Read**Don't be fooled by other frames & chassis online, this is a complete chassis ready to go the the painter with no additional welding or fabrication needed.  VISA / MC  ACCEPTED To discuss details please call Rods & Rides By TD, LLC.   (855) ROD-RIDE T.D. Ward (314)-393-2123 Cell Picture of completed bike with this frame.

 RODS & RIDES MOTORCYCLE COMPANY - R O L L I N G  C H A S S I S - This auction / sale is for a complete bike minus Engine, Exhaust, Transmission, and Primary. That means, everything else is ready to go... Painted, Lights, Foot & Hand Controls, Bars, Brakes, ETC SALE DOES NOT INCLUDE DRIVETRAIN CAN BE SOLD COMPLETE, CALL FOR DETAILS The "Anarchy Bobber" is a newest model and features some of the most advanced technology we have offered in the Drop Seat Bobber line up.

  RODS & RIDES MOTORCYCLE COMPANY Saint Louis, MO USA   2014  DROPSEAT  BOBBER      ~SPOOKY HALLOWEEN SALE, ONE WEEK ONLY~ Oct 9th - Oct 16th   MSRP $24,995  SALE $19,995 SHIPPED TO YOUR DOOR  S a v e   $ 5 , 0 0 0. 0 0   TERMS OF SALE: This sale is for an order, please allow 6-8 weeks for complete build time.  The choices are yours for the following equipment options.   -300mm Paint: Mono Color Choice (Add $495 for Candy Colors, $995 for flames, and $195 for Pinstriping)   -Springer Frt End: Satin Black or Chrome (Add $495 for gloss or any other color)   -Chrome Spoke Wheels STD Frt.

  RODS & RIDES MOTORCYCLE COMPANY Saint Louis, MO USA   2014  200mm DROPSEAT  BOBBER      MSRP $29,995     TERMS OF SALE: This machine is ready to go and can be headed your way today, shipping is included or you can pick it up in person.   -200mm Paint: House Of Kolor Paint with Old School Pinstriping -Springer Front End   -Fat Spoke Wheels STD Frt. 26â€� Front W/ Whitewall and 18" Rear W/ 200mm Tire   -28 Ford LED Taillight    -Leather Seat Hand Made By World Famous Rich Phillips   -Murdered Package (Includes, Rocker Boxes, Headlight, Taillight, and primary drive)   -2 1/2" RR Exhaust W/ Black Wrap   -Engine: Ultima El Bruto Compition 140â€� 2305cc 175HP   -6 Speed LSD Transmission Black W/ Hydraulic Clutch - 12â€� Ape Hanger Style Bars Color Matching   -Primary 2â€� BDL With Outer Cover Contrast Cut -JB Quad Front Brake System All motorcycles carry a 1 year/unlimited millage parts warranty.

For sale is a 2009 Hardknock Kikker 5150 bobber style 3/4 size chopper with a 125cc gas engine that runs great. These motorcycles are bought in kit form from: kikker5150.com. You pick the rolling chassis than add the options you want to complete it.

2008 Proper Chopper Bobber 357 ST Our goal is to satisfy our customers. We stand behind every unit we sell.Top Line Information Year: 2008 VIN: 1P9S229568C522273 Make: Proper Chopper Stock: P04117 Model/Trim: Bobber 357 ST Condition: Pre-Owned Engine: 1753 cc Exterior: Black Transmission: 6 Speed Mileage: 7,326 VideoAdditional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * * Contact Steve Hollander Toll Free: 877-470-6111 Phone: (520) 747-8339 Description Looking for a Head Turning Motorcycle, that will Stand out from the Crowd, Then take a look at this Awesome, 2008 Proper Chopper 357 ST!! This Beauty is One of a Kind!!

 This Custom Bobber I am listing for a friend. He is building a couple motorcycles and needs some extra cash to finish them. This is one awesome motorcycle with an awesome paint job.  It's a 2000 Harley Davidson Sportster 883 with a 1200 kit installed.

RODS & RIDES MOTORCYCLE COMPANY The FuKentrike is one of the wildest creations from Rods & Rides Motorcycle Company. The trike features the same performance and the same quality as the rest of the line up we build. As always the Ultima Performance El Bruto series engine is what the trike is built around. This engine produces 110 HP at the rear wheels.

Custom Build Chopper Bobber 2008 Cenzi Custom Chopper Build $38.000 in Value http://www.youtube.com/watch?v=VGT9sMVECl8   Build by Tony Cenzi in 2008 Only 700 miles perfect condition like new Engine 124 CC TP PRO SERIES Transmission Baker 6 Speed Won #1 Best Bobber 2008 All cables inside the frame (nothing on the exterior) Eye catcher Contact George 847 505 6777 By sale by owner      

  Hi there, This bike was only driven approximatly 45 miles.  Its brand new.  There are still stubbs on the tires.  Its a wicked looking bike that runs great.  Fast as heck, loud as heck, and it turns every head on the road.  You will be the talk of any bike rally guarenteed.  It was built by TD Ward out of Missouri and shipped up to me.   He's a great bike builder that took second at the Sturgis bike build off and there are some pretty big names there.  Arlen Ness, Jessy James, etc.... and he took second!!!   And  I know for sure this build was one of his favorites!!! I'm sure it will be worth a ton in no time.  This bike will not let you down.  If I didn't need the money I wouldn't sell it.   I also have no time to ride.  Well, good luck bidding and Thank You, Shan.

This bike could be close to one of a kind. Want to turn some heads in the streets this is the bike for you. Want to enter it into a show this is the bike for you.

CLEAN TITLED 2004 CUSTOM ON A SANTEE FRAME. REV TECH 100 MOTOR. BIKE WAS $25000 NEW IN 2004.

2012 rooke style bobber 113 Midwest ultima 6 spd ultima 2" ol school belt 250 rear This bike was finished mid summer 2012 and has estimated 500 miles on it , runs and drives perfect ,  The orange chopper in the last picture could also be had for $14,000.00

This bike was built before the start of the entire cookie cutter custom bikes you see out there, built by some company and they all look the same. It has an Atlas Pro Magnum Frame, to hold the horsepower this motor makes. The motor is a combo S & S and Harley motor, with all of the good stuff mixed in.

Weldritecustoms.com  built ..It has custom drag style bars with built in tach ,setting on a 2011 wide glide front end  It has beeen lowered 2 inches...The lower legs are powder coated .Paucho style gas tank with satin black powder coating..The frame is a ridged  with built in oil tank thats welded in the frame Frame is powder coated as well.. Ostrich skin seat sitting on a mono shock thats adjustable .The wireing is completely new  under the seat pan lid  witch oil tank fill cap is mounted into with temp gauge  One off tail light mount  engine is fresh This bike is Fast and fun to ride  very well built bike..Will be in common trends magazine in the near furture and another larger name mag ..Custom exhaust  its a 2n1 madfe out of 2.1/4 16 gauge pipe thats ceramic coated inside and out ..someone is going to get a real nice head turning bike that can be rode like they are ment to be!!!    Tanks and good luck!!

Just completed 1993 89c.i. EVO sporty.89 inch S&S Big bore kit (flywheels,rod's,piston's,cylinders,adjustable pushrod's).Andrew's cam's,Crane Ing,S&S E carb.Motor is set in a candy red powder coated Krafttech frame with a DNA springer ,Invader wheels(These wheels are not Knock off's) with new Avon Cobra tires. The rear has a DNA sprotor set up the front is a spool.(N0 front brake) Cole Foster Salinas Boyz Fuel tank,Krafttech oil tank.The pipe's are Bassani sweeper's.The bike has a new H-D stator,CCI regulator and a new sealed H-D battery.The title match's motor with m.s.o. for the frame.This was a split case build from the ground up with nothing left untouched.

 Exile fatbob harley night train Real exile bike brand new build using a Harley 2001 Night train. has a Harley title so no issue on registering. Brand new bike has less than 700 miles on it since new build.

 Pro-built custom 48 Bobber

 This is a custom Harley Davidson Shovelhead. This is one awesome motorcycle with an awesome paint job.  It's a 1975 Harley Davidson Shovelhead with a four speed transmission set inside a Paughco Wish Bone frame 2 1/4 up 0 out with a 30 degree rake. The Front end is a Paughco 3 over springer.

2011 Ultima Bobber Ultima 120 motor Ultima 6 speed Ultima starter Mikuni 48 carb Springer front end Springer seat Dual disc brakes Brass forward controls 10" ape hanger bars Short heat wrapped exhausts Headwinds headlight Rear foot pegs mounted into frame ( screw in and out if you want removed ) Suction cup rear seat included 2" open belt primary Chain drive Ridewright wheels 1st. service just completed ( oil change and bike thoroughly checked over ) *** CLEAR FLORIDA TITLE  *** This bobber was built by a licensed Florida State motorcycle builder... Title make: ACYL This bobber can be registered and insured in all states and is a blast to ride...

I have a great running and show winning Beneilli bobber for sale. This bike is tons of fun and super custom. So many little details that make this the show winning bike that it is.

2012 custom bobber S&S 88ci motor completely rebuilt from bottom to top. Ultima 6speed tranny new . Has a new ultima 3 in open belt primary .

2012 custom bobber has a S&S motor 88 ci completely rebuilt. 6 speed ultima tranny new and a ultima 3 in open belt primary new. New paint and new tires and new set of hooker pipes nice and loud.

Covington’s Cycle City 2008 Covington Custom Bobber 1st Titled in Texas 10/20/2014 Built by the legendary Jerry Covington! This is one of the most beautiful and detailed motorcycle I have ever seen, let alone owned. The history as best I can, and based on conversations with Jeff Covington himself is as follows: • Sold in 2011 at Daytona Bike Week to local TX collector.

Motora ,Bobber motor en v 4 palos 16 valvulas ,cuatro carburadores ,6 Cambios invertidos ,Pintura custom y aros Guie Custom La motora es unica echa completa en su cuadro Original con motor Original de fabrica.motor suzuki ,1985 suzuki madura, Vendo no Cambio ... , Bobber , Suzuki - 1985, Custom©

2015 CUSTOM BOBBER Top Line Information Year: 2015 VIN: MVIN357797IND Make: CUSTOM Stock: A1206 Model/Trim: BOBBER Condition: Pre-Owned Engine: 95 cc HARLEY DAVIDSON Exterior: Black Transmission: 6-SPEED Mileage: 500 Additional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * * Phone: (630)425-3237 Alt: (630)624-8303 DescriptionCUSTOM SHOVELHEAD BOBBER!!! 2015 CUSTOM BOBBER FRESH 79 SHOVELHEAD MOTOR 95CI: S&S 4 5/8 FLYWHEEL, RODS, FORGED PISTONS(9:5:1) ANDREWS C CAM MANLEY STAINLESS VALVES, HIGH LIFT SPRINGS W/ TITANIUM COLLARS SOLID LIFTERS ROWE CAST IRON GUIDES COLONY ALUMINUM PUSH RODS STEEL BREATHER GEAR MILD HEAD PORTING STEEL BREATHER GEAR REBUILT STOCK OIL PUMP CRAFTTECH SOFTAIL FRAME ULTIMA 6 SPEED TRANSMISSION HYDRAULIC CLUTCH CHROME SPOKE WHEELS SPRINGER FRONT END CUSTOM LEATHER SEAT 2 SETS OF EXHAUST   At our dealership we work very hard to accurately describe our vehicles through text descriptions and elaborate photos. When you purchase a pre-owned vehicle it is not a new vehicle.

Toll Free Number: (855)-ROD RIDE Rods & Rides is not just a brand name, its a style of its very own. The brand represents true American craftsmanship by using American materials and built in Saint Louis, Missouri USA.  The brand is a very well known name in the national motorcycle shows,  magazines, and several TV channels but that's not where is stops. The brand can be found in many value guides as well, one of which is KBB (Kelly Blue Book).

Re-listed due to a non paying bidder. This in a near show quality build in showroom condition. Ridden only a few times since completion in 2014. Not ridden since.

MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 50 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS EVO , SHOVELHEAD  , PANHEAD MOTORS  2016 MMW OG OLD SCHOOL STOCK TIRE WHITEWALL     RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0 UP STRETCH ,,LEFT   SIDE DRIVE, ,, ,BARREL OIL TANK  ,SPRINGER    FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   16X3.5   ,21X2.15   CHROME   WIRE WHEELS (CHROME ,BLACK , RED AND ORANGE ALSO AVAILABLE).  TIRES  ,  CUSTOM REAR FENDER      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM    STYLE GAS TANK  (SEVERAL TO CHOOSE FROM) ,    CUSTOM  BARS WITH  RISER , WE ALSO HAVE CHROME APES, KICK STAND    NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       .

1980 YAMAHA XS650 BOBBER FREE AND CLEAR NEW MEXICO TITLE. NO MECHNICAL PROBLEMS JUST A FEW DENTS IN THE TANK. ITS BEEN A GREAT BIKE BUT I JUST PURCHASED ANOTHER ONE AND HAVE NO NEED FOR TWO.  HAS NEW TIRES AND I JUST PUT A SPORTSTER FRONT END ON IT. ALL MAJOR MECHANICAL AND ELECTRICAL PARTS HAVE BEEN REDONE.

Yamaha 650 custom bobber. Professionally built using TC Brothers components, including frame, forward controls and most of the tins. Has cross laced powder coated wheels and period correct tires.

         MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA MMW HOT ROD LEAF SPRING , 200 TIRE BOARDTRACK RACER , WHITEWALLS    HOT ROD BOARDTRACK RACER   2015 MMW  HOT ROD  BOARDTRACK  RACER  200 REAR , 21 FRONT  .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS ( CAN SET UP FOR OTHER HARLEY MOTORS )  .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN   , , 36 DEGREE RAKE   ,SPECIAL  INCH BACK BONE STRETCH, SPECIAL UP STRETCH ,,  LEFT  SIDE DRIVE , ,, ,  CUSTOM  OIL TANK  /  ,  LEAF SPRING      FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL)18X5.5 , 21X 2.15 RED WIRE WHEELS    WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR   TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,  RISER, BARS , KICK STAND , NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .

STANDARD 88 PAN HEAD REPLICA MOTOR.  REV TECH 4 SPEED REPLICA.  BELT DRIVE PERFORMANCE CLUTCH.

This is a professionally built, old school, rigid frame big twin bobber. It was built in 2013 and has a clean Colorado title. This wicked machine is loaded with power!

How about a Custom Bobber? It was built by Union Cycle in Tucson AZ, in 2008. The make is "Union" on the clear Texas title.

 Everything on this Bike is Like Brand New. Totally Sleek and eye catching. You need to see this.

I am selling a 2002 Honda Shadow 600 bobber. Has a clean title. 4800 miles.

One of a kind Suzuki Bobber. This bike is custom and you won't find another like it. If you want a bike that is loud and turns heads everywhere you go, this is the bike for you.

 Whole shot. This is a full custom one of a kind bike built in 2013. This bike was built by KAELINS custom cycles. New S&S 89ci motor built by custom design studios in Novato CA.

CUSTOM BOBBER, HIGH END BUILD, THE BADDEST BIKE AROUND. 30" CUSTOM WHEEL, AIR RIDE, CUSTOM LEATHER AND PAINT, 5 SPEED, RUNS GREAT, VERY FAST, SERIOUS BUYERS ONLY 29,900 WILL GO UP IN THE SPRING. THIS IS DIRT CHEAP AND ONLY FOR SALE BECAUSE OF MOVE.

I have a 2012 bobber for sale that was built by Capones Customs out of  Shelbyville Indiana. Has a 107 ultima motor with 6 speed ultima tranny. Very low hours!!

This is a award winning bobber built by Mike Bauer and painted by Viking Cycle Art Inc.  It is Featured in the November 2011 issue of V-Twin Magazine ( No. 127) and the March 2012 Issue of Easyriders Magazine ( No.

This is a 93in. S&S Shovel Head Engine on a 2004 Softail Frame. Engine only has 6000 miles on it.

This bike is simply awesome to ride. Recent service done on this bad boy.  Details are a hand tooled leather seat, Harley Davidson Controls, Harley Fatboy front end, 220 rear tire, custom metal, Ultima 6 speed, 4 inch open primary belt drive, HUUUUGE 130 inch Ultima engine that purs like a kitten.

2009 Detroit Bob are made by Percision cycle works custom paint overall condition of bike is it 9/10 250 rear tire Primo Riviera six speed primary S&S super carb great bike great shape hard tail with springer front end. 88 ci evo 

If you are wanting a custom built motorcycle this Old School Bobber built by C&S Cycles and dubbed the “Black Widow” is one BAD ASS BIKE! Featured on the cover of Full Throttle Magazine with a 2 page center story, this is a one of a kind chance of a lifetime for a real old school biker that’s crazy enough to ride a bike like this!  I really don't even know where to begin describing this one-of-a-kind scooter. To start, I will say that I have never ridden or seen anything like this in my 59 year old life!

I am selling my 1979 harley bobber. This is a running and driving bike that needs nothing but a rider. It is pretty good looking and there are no bikes around that look like it.

This bike has been well maintained, filters and fluids replaced every year, I've owned it (3 years), replaced primary seals, new battery as of last year, new speedometer (approx. 5000 miles), rebuilt carburetor, re-jetted (came from HI to MT), and is a real head turner. I am only selling to start a family and won't be riding much.

This bike is a must see with only 214 miles. just built and put on a shelf i start it up once a month   keep the battery and gas fresh    

A completely rebuilt 74 cubic inch iron head sportster. Motorcycle runs great. I purchased this bike as a basket case in 2002 and spent 2 years putting it together.

          MALIBU MOTORCYCLE WORKS 818-300-4299 ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 70 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA FITS 1977-2003 SPORTY , OR 1990-2002 BUELL ( NOT BLAST MODELS )  2015  SUPER FUNK   250 SPORTSTER / BUELL BOBBER   RIGID ROLLING CHASSIS  SET UP FOR CHAIN , , 40 DEGREE RAKE   ,4  INCH BACK BONE STRETCH, 0 UP STRETCH ,, 250 RIGHT  SIDE DRIVE, ,, , OIL TANK UNDER MOTOR   ,SPRINGER   FRONT END     (OTHER FRONT ENDS AVAILABLE ,INVERTED , ,CONVENTIONAL),   18X8.5,26X3.5  FAT SPOKES  WHEELS WITH BILLET HUBS    . AVON    FRONT AND REAR TIRE  , REAR FENDER (REAR FENDER SUPPORT ALSO INCLUDED ,)     ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   GAS TANK  (SEVERAL TO CHOOSE FROM) ,  ,   RAPED APES  BARS,NECK CUPS , RACES , WHEEL SPACERS      NOTE :THE SHEET METAL HAS NOT BEEN MOUNTED YET, WE HAVE DIFFERENT STYLES OF SHEET METAL       . THIS BIKE IS ASSEMBLED AND READY TO GO RIGHT NOW  .

Year: 1974 Model: Iron Head Builder: FD Motorcycle and Customs Displacement: 995.7cc Carb: S&S Shorty Air Cleaner: S&S Exhaust: Straight Pipes Transmission: Right side shift 4 speed Frame: 1974 Custom Hardtail       Rake 38 Degrees       4" Stretch Wheels: Front Wheel Size 21" 40 Spoke Rim     Tire is an Avon Speedmaster Front Brake: N/A Rear Wheel: Stock H-D    Size 16" Spoke   Tire is a Shinko 130/90-16 Rear Brake: Drum H-D Stock Paint: Color Gloss Black    Engine: Satin Black Accessories: Foot Controls & seat built by FD Motorcycle and Customs. Rear fender ribbed 5" wide. Tail Light Brass by FD Motorcycle and Customs.