Hodaka All Motorcycles in Washington

Hodaka Combat Wombat air cleaner. Has some blemishes typical of age and use. Outside of lid has been painted black.

Hodaka Wombat 125 air cleaner. Decals are faded, has some blemishes typical of age and use. Condition as shown.

Hodaka air cleaner backing plate. Very straight and usable. We believe this should fit Wombat, Road Toad, and/or Dirt Squirt.

Hodaka Thunderdog 250SL exhaust flange. Includes hardware. Condition as shown.

Hodaka Thunderdog 250SL motor. Engine number R03180. The crank, clutch, and sprocket shafts all turn.

Hodaka Thunderdog 250SL intake manifold. Rubber is in poor shape. Condition as shown.

OEW 68500 Tail light and license plate bracket. Found on many Hodaka, Bridgestone, and Rockford models. The light lens has some stress cracks.

Hodaka Ace 100 17" front wheel. Has some rust, and I can hear some rust inside the rim itself. Should still function just fine.

Hodaka Ace 100 17" front wheel. Condition as shown. location: shelf

Hodaka Thunderdog 250SL/ED cylinder and piston. Cylinder and piston don't appear to have any major damage or hard seizure. Rings are intact.

Hodaka Ace 100 headlight bucket with mounting brackets. Paint is faded but no major damage. One reflector missing.

Hodaka chainguard. Model unknown. Please take a careful look at the photos to decide if this is the part for you.

From what we can tell this is the chainguard for a Hodaka Combat Wombat. Please take a careful look at the photos to decide if this is the part for you. Condition as shown.

GEM performance reed intake for Hodaka Combat Wombat. The bolt hole spacing for the intake is 20mm x 54mm. One stud is missing (threads in the hole look fine).

Hodaka Combat Wombat air cleaner lid. Has some blemishes typical of age and use. Small dent near the mounting hole.

Hodaka Road Toad air cleaner. Has some blemishes typical of age and use. Condition as shown.

Hodaka Ace 100 motor from a model 92. Crank is stuck, shifter mechanism is gunked up so not sure if that works either. Shifter cover has some damage and head has some broken fins.

70 HODAKA ACE 100 MX M X OEM REAR BACK BRAKE ROD BAR Description GOOD USED HADAKA BRAKE ROD OFF OF A 1970 ACE 100MX. BIN#: H16F ENGINE: N/A FRAME: RS7B2 ITEM DESCRIPTION:  IN GOOD WORKING ORDER.  AS PICTURED. 4/24/15 MAY ALSO FIT: OTHER YEARS AND MODELS.  * PLEASE DOUBLE CHECK PART NUMBER AND FITMENT.

                                                                                NOS Hodaka Ace etc rear TRAIL SPROCKET guard CARRIER HOLDER steel   NOTES: I have never seen one of these, and It took awhile to figure it out. This is a rear trail sprocket holder for early Hodaka's. The early Ace and others, had a "Trail" sprocket overlay "ring" option that you quickly bolted to your street sprocket, and with a quick attachment of some extra links, your early Hodie had trail gearing.

70 HODAKA ACE 100 MX M X OEM SIDE KICK STAND KICKSTAND Description GOOD USED HADAKA KICK STAND OFF OF A 1970 ACE 100MX. BIN#: F13R ENGINE: N/A FRAME: RS7B2 ITEM DESCRIPTION:  IN GOOD WORKING ORDER.  AS PICTURED. NOT STRAIGHT.  4/24/15 MAY ALSO FIT: OTHER YEARS AND MODELS.  * PLEASE DOUBLE CHECK PART NUMBER AND FITMENT.

70 HODAKA ACE 100 MX M X OEM HANDLE BAR HANDLEBAR CLUTCH PERCH LEVER Description GOOD USED HADAKA CLUTCH PERCH OFF OF A 1970 ACE 100MX. BIN#: H16F ENGINE: N/A FRAME: RS7B2 ITEM DESCRIPTION:  IN GOOD WORKING ORDER.  AS PICTURED. LOOSE.  CLAMP IS GOOD.  SURFACE RUST.  4/24/15 MAY ALSO FIT: OTHER YEARS AND MODELS.  * PLEASE DOUBLE CHECK PART NUMBER AND FITMENT.

GENUINE period motorcycle PART NOS Vintage Japanese Hodaka? Brake side  PERCH only w/ Mirror Boss M8 1Ea This the RH Brake PERCH/MOUNT only...does not come with lever, as shown.. NOTE* No known part number, no known application.

HODAKA WOMBAT COMBAT 125 CRANKSHAFT CRANK SHAFT / CONNECTING ROD Description GOOD USED HODAKA CRANKSHAFT FOR A WOMBAT COMBAT 125.   BIN # E2B   ENGINE # J03644 FRAME #  ITEM CONDITION: AS PICTURED. GOOD WORKING ORDER.  NO EXCESSIVE PLAY IN ROD.  THREADS ARE GOOD.

Unknown motorcycle seat marked 4H7-1 on pan Everything seems as it should be No tears in cover I will wrap in thick paper for shipping unless you would like it boxed

Brand new nippondenso ND w27es-zu spark plug equivalent to ngk b9ev. OEM spark plug for some Japanese performance models. 

Original Hodaka ?  914610 ? Transmission secondary countershaft COLLAR Nos  NOTE* I am not sure if this is a Hodaka part or not.

Genuine Hodaka parts Original Hodaka  90/100 etc 111012 M10 Assorted Plain head BOLTS (5pcs)  5 pieces as shown...some light dust noted, some light spots.. etc YOU GET* 5 bolts as shown PLAIN HEAD bolts: 2ea: M10x1.5 x 25 17mm Hex 1ea: M10x1.5 x 25 14mm Hex 1ea: M10x1.5 x 22 14mm Hex 1ea: M10x1.25 x 22 14mm hex MAY FIT OTHER YEARS AND MODELS BE SURE part number is CORRECT FOR YOUR APPLICATION BEFORE PURCHASING. PART SOLD by PART NUMBER ONLY. Application is just a reference guide only.  INTERNATIONAL SHIPPING NOTE (including Canada)* Please check FLAT RATE foreign and domestic shipping price before purchasing item, International items have a higher shipping cost then actual.

70 HODAKA ACE 100 MX M X OEM REAR BACK BRAKE PEDAL LEVER / SHAFT / SPRING Description GOOD USED HADAKA BRAKE PEDAL OFF OF A 1970 ACE 100MX. BIN#: H16F ENGINE: N/A FRAME: RS7B2 ITEM DESCRIPTION:  IN GOOD WORKING ORDER.  AS PICTURED. 4/24/15 MAY ALSO FIT: OTHER YEARS AND MODELS.  * PLEASE DOUBLE CHECK PART NUMBER AND FITMENT.

This is a used Umezawa Cb-13-101 hub made in Japan  and In the brake assembly it says Umezawa CB-13-200 and it is made in Japan. It is from the 1970s and is for a Hodaka Motorcycle. They are black coated aluminium and round.

NOS Gemini Rupp Bonanza Fuji Hodaka Chaparral Yamaha motorcycle Transmission SHAFT  Includes shaft as shown, no other components. CONDITION: Nos but has shelf wear and rust spots..still a very usable part... Manufacturer: Unknown Part Number: Unknown Application: Unknown Note: No known application.

GENUINE period motorcycle PART NOS Vintage Japanese Hodaka? Brake Lever PERCH Bracket Holder NPN  NOTE* No known part number, no known application. Not a recent reproduction, but made back in the day.

GENUINE Hodaka PART 2 EACH USED Vintage HODAKA Cylinder HEAD BOLT 712503 2 each Quantity: 2 each as shown, actual item pictured..thank you Hodaka part no: 712503 USED NOTE*  no known application. Hodaka for sure. Hopefully you will recognize it and can use it, THANK YOU MAY FIT OTHER YEARS AND MODELS BE SURE part number is CORRECT FOR YOUR APPLICATION BEFORE PURCHASING. PART SOLD by PART NUMBER ONLY. Application is just a reference guide only.  INTERNATIONAL SHIPPING NOTE (including Canada)* Please check FLAT RATE foreign and domestic shipping price before purchasing item, International items have a higher shipping cost then actual.

Vintage original Bonanza Hodaka used rear shockMeasures 12.5" from eye to eyeSee pics.    Bin 1E We are just a small husband and wife team doing the best we can to provide service and quality. We describe as honestly as possible.  Understand that most of our items are used, not perfect and please bid accordingly.  Returns will be accepted within the rules of the eBay and Paypal terms and conditions. Please contact us within any concerns before bidding.

70 HODAKA ACE 100 MX M X OEM HANDLE BAR HANDLEBAR Description GOOD USED HADAKA HANDLE BAR OFF OF A 1970 ACE 100MX. BIN#: 79E ENGINE: N/A FRAME: RS7B2 ITEM DESCRIPTION:  IN GOOD WORKING ORDER.  AS PICTURED. STRAIGHT.  NO DENT.  SURFACE RUST.

 Yamaha Yamaha Vintage Motorcycle YG YM YL YD YH  1 FOOTPEG SET NOS NPN Oem NOTE*  Very Old Yamaha (or possibly Hodaka) footpeg set. Early on, Yamaha had fixed pegs on alot of models like the YG1 and they were reto-fitting some models with the folding type as you see here later on. I am fairly certain these are Yamaha, Japanese for sure....

NOS Gemini Rupp Bonanza Fuji Hodaka Chaparral motorcycle Woodruff Crank KEY way CONDITION: Nos but has shelf wear and light rust..still a very usable part... Dimensions: 12.5mm long x 3.0mm wide x 4.75mm deep Manufacturer: Unknown Part Number: Unknown Application: Unknown Note: No known application. Item came out of an old Gemini motorcycle inventory.

Genuine Hodaka part Original Hodaka Clutch Hub Ace 90/100 etc early NOTE*  This part has some surface rust, but shows no sign of ever being installed or run. If you look at the teeth closely, or the spring wells, there are absolutely no witness marks. But because of surface rust, I have listed this part as used..genuine Hodaka part..very similar to part number 924012, but I cannot guarantee that part number as correct.

NOS Gemini Rupp Bonanza Fuji Hodaka Chaparral motorcycle Shifter shaft ROLLER CONDITION: Nos but has shelf wear and light rust..still a very usable part... Dimensions: SEE PHOTO Manufacturer: Unknown Part Number: Unknown Application: Unknown Note: No known application. Item came out of an old Gemini motorcycle inventory.

YAMAHA suzuki honda hodaka OIL DRAIN PLUG SET (2pcs) M14x1.50 21mm Hex Nos OEM  NOTE* NO PART NUMBER. Came out of an old Yamaha/Hodaka inventory NOTES*  You get 2 plugs as shown. This isn't a hardware store bolt.

GENUINE Hodaka PART USED Vintage HODAKA Rear Axle Sprocket DRIVE COLLAR 709287 Hodaka part no: 709287 USED NOTE*  no known application. Hodaka for sure. Hopefully you will recognize it and can use it, THANK YOU MAY FIT OTHER YEARS AND MODELS BE SURE part number is CORRECT FOR YOUR APPLICATION BEFORE PURCHASING. PART SOLD by PART NUMBER ONLY. Application is just a reference guide only.  INTERNATIONAL SHIPPING NOTE (including Canada)* Please check FLAT RATE foreign and domestic shipping price before purchasing item, International items have a higher shipping cost then actual.

GENUINE period motorcycle PART NOS Vintage Japanese Hodaka? Brake Lever PERCH Bracket Holder NPN  NOTE* No known part number, no known application. Not a recent reproduction, but made back in the day.

NOS Gemini Rupp Bonanza Fuji Hodaka Chaparral motorcycle Transmission SHAFT  Includes shaft as shown, no other components. CONDITION: Nos but has shelf wear and rust spots..still a very usable part... Manufacturer: Unknown Part Number: Unknown Application: Unknown Note: No known application.

GENUINE period motorcycle PART NOS Vintage Japanese Hodaka? Brake Lever PERCH Bracket Holder NPN  NOTE* No known part number, no known application. Not a recent reproduction, but made back in the day.

PLEASE SEE MY STORE FOR ALL OF YOUR MONTESA & BULTACO NEEDS, FROM THE USA! NOT SPAIN! Includes:  Genuine Hodaka nuts and bolts, and other various washers gaskets sprocket lock washer and more Does not Include: Condition: Good used condition, see photos for your own decision on quality.