-
1978 Honda CB (1978)
Hello, Ive got a rebuilt CB750 Super Sport with a CB750k motor in it. the bikes has just been finished being built but still needs a few things like tuning and fixing the rear brake i'm in need of the cash so just trying to sell as is right now. ask any questions or if you want to see more photos let me know. Work Done to the bike Honed Cylinders & new Honda OEM piston rings Top half of engine dissembled cleaned and new seals Powder coated frame and front fork tubes Complete rewire of electronic system Carbs dissembled, cleaned, jets replaced and new seals New Items (everything listed is NEW not used at all) Engine OEM Piston rings $90 Stainless steel engine bolts OEM Cam chain tensioner cam $115 Vesrah Complete Gasket $72 Clutch lifter plate $100 Frame IRC Tires $185 Powder coated $375 Cycle-x 4-1 $379 Chain $100 Clutch Cable Shocks $105 Grips $17 Sprockets front and rear Brakes Front Master cylinder Brake pads $60 Seals for front and rear calipers $108 Speed bleeders Electrical Motogadget M-unit system $299 K&S switch Deluxe cables $80 Ricks Motorsport Starter Solenoid $40 Ricks Motorsport Rec/Reg $105 shorai battery Points and plate $50 Gas Carb gasket set Slow Jets $50 Gas lines Petcock Push/Pull cable $27 Malcolm2016-11-03 04:34:39Portland, Oregon, United States244,100.00 -
1969 Honda CB (1969)
I bought this bike 3 years ago and never ride it. When I bought it it had no battery, a rusted gas tank and bad tires. I replaced the battery and tires and coated the tank.2016-08-20 04:41:26Portland, Oregon, United States91800 -
CJ360T Professionally Built Urban Tracker by Digital Directiv (1976)
This bike was built to be unveiled at The One Motorcycle Show 2013 in Portland, OR and is displayed in their accompanying documentary. It has since been featured on Bike EXIF and has made an appearance the The One Motorcycle Show in Austin, TX as well. This is a full custom build from the ground up built with the attitude of an urban pothole jumper. I call it an Urban Tracker. For the build, it was completely stripped down the smallest nut and bolt. The frame was cleaned, de-tabbed, and powdercoated. At the same time, every piece of hardware that couldn't be replaced with stainless was treated to a new bright zinc coating.2013-09-26 21:17:18Portland, Oregon, US53,550.00
Honda CB Price Analytics
Moto blog
Honda has applied for a European Vehicle Type Approval for a new model
Fri, 06 Aug 2021Earlier this year, a Japanese company patented the name and layout of the new NT1100 model. A while later, renderings of what a sports touring car with the engine and transmission from the CRF1100 Africa Twin might look like appeared on the network. Since then, no new information about the appearance of the NT1100 has been leaked, but just the other day it became clear that the model will be presented soon.
Honda has unveiled the 2022 CRF450RX
Fri, 04 Jun 2021There are no crutial changes, the manufacture's engineers, with the help of factory racers, were fine-tuning the motorcycle. As a result, the enduro CRF450RX, like the cross-country CRF450R, received a retuned electronic engine control unit, as well as recalibrated shock absorbers, which had a positive effect on enduro handling.
Honda has announced plans to go completely zero-emission
Sun, 30 May 2021The company President Toshihiro Mibe said that Honda is committed to being completely carbon-neutral across all of its products. To do this, the company is expanding the range of electric vehicles and has also developed a standard for replaceable batteries Honda Mobile Power Pack.
Looking forward to the NX200 - Honda's new touring enduro
Thu, 06 May 2021It will be a real adventurer, only a small one. The motorcycle will focus on the Asian markets. These isn't much information about the bike yet, but it is preliminary known that it will be built on the CB190 platform and will receive a single-cylinder engine with a displacement of 184 cc.
The other day, Honda patented the name and layout of the NT1100 motorcycle
Fri, 12 Feb 2021The Africa Twin parallel twin will be installed in another chassis - an asphalt tourist one. Unfortunately, at the moment there are no official pictures, only the fantasies of fans and third-party designers. Only one thing is clear - the engine will be 1100cc, and just like the CRF1100 Africa Twin touring enduro and CMX1100 Rebel chopper, the engine will be offered with both a conventional motorcycle foot-shift gearbox and a DCT robot.
Honda has updated its flagship GL1800 Gold Wing tourer for 2021
Tue, 19 Jan 2021There are no radical changes, improvements have affected parts of Honda tourers that are important for ensuring the comfort of the rider. In addition, new color and graphic schemes have appeared for the 2021 models. The Tour version has Gunmeatal Black Metallic and Candy Ardent Red.
Honda introduced the European version of the MSX125 Grom 2021 model year
Sat, 12 Sep 2020The legendary microbike received an engine that complies with Euro5 standards and significantly upgraded looks. In addition, the MSX125 will now also be sold under its own name Grom on the European market. Honda Grom received an updated 125cc single-cylinder engine with 9.6 horsepower, aggregated with a five-speed gearbox instead of the previous "four-speed".
Honda will introduce the new CBR600RR later this year
Wed, 08 Jul 2020There has been no official information from Honda about the new generation CBR600RR yet, but it became known that the 2021 model will echo the older Fireblade in terms of its exterior. The "Six hundred" will receive a "two-eyed" LED head optics, the air intake will be located in the middle. Winglets will be added to the fairing to increase downforce at high speeds.
Honda has patented a technical solution from the arsenal of the Gold Wing tourer.
Thu, 02 Apr 2020The modern Honda Gold Wing is equipped with a double wishbone front suspension, which not only increases ride comfort, but also allows the geometry of the motorcycle not to change during acceleration and braking. Lever suspension, which stabilizes the bahavior, may appear on other models of the company in the future. This is hinted at by patent images of similar systems integrated into the design of completely different motorcycles - the “classic” CB1100 and the small-capacity C125 Super Cub.
Little brother: Honda introduced a "nano version" of the X-ADV scooter
Sun, 11 Aug 2019The model is called ADV 150 and, despite its similarity with the X, it has nothing to do with it. The engine is a single-cylinder with a volume of 149.3 "cubes", developing 14.2 hp at 8500 rpm and 13.8 Nm at 6500 rpm. Suspension is a regular telescopic fork and two Showa rear shocks.