Find or Sell Motorcycles & Scooters in USA

Honda CB Motorcycles in Cincinnati

  • 1983 Honda CB1983 Honda CB (1983)
    One year only 1983 CB1100F, custom made with a CBR swingarm, ZX14 front end, ZX14 Nissin brakes, CBR powdercoated wheels. There is a working headlight under the number plate, Trail Tech computer shows speed and RPM, as well as engine temp, new tires.  Street legal with a clean Indiana title.  *This is a CB1100F, not a 900F, the Freddie Spencer decals do not come in the 1100F designation* Paint is a pearl white with blue pearl that really shines in the sunlight, decals are professionally made Freddie Spencer replica decals with clear coat over to make sure they dont fade for years to come.  Restomod, Cafe, Brat, this bike is truly one of a kind.  This bike starts and runs great, the exhaust note is unique and throaty, shifts through all gears without issues and idles without hiccup.
    2016-10-06 04:34:57
    Cincinnati, Ohio, United States
  • 1973 Honda CB1973 Honda CB (1973)
    Up for sale is a custom built 1973 Honda CB750K hardtail chopper.  It was originally intended to be a show bike, but I haven't done any shows in years.  I would like to see this go to someone who will clean it up and get some use out of it.  I would not consider this bike to be a rider because of the hardtail. This bike has a ton of custom parts, including: Amen Savior weld-in hardtail 4" over front forks by Franks Engineering 6" front handlebar risers .060" over pistons (approximately 880cc) Vintage Henry Abe 7-star mag wheels Saddleman saddlebags and handlebar toolbag Electronic ignition - no points to mess with Amen Savior chopper style electrical box - most wires are run through the frame now Custom oil tank and battery box Aircraft style fuel tank with locking caps Custom NC aluminum triple tree - with All Balls Racing roller bearings Twitch Brothers custom forward controls Drag Specialties tank mount oil pressure gauge Kurakyn LED rear tail light with integrated turn signals; fork mount front turn signals Satin black paint with gloss black powder coat and stainless steel fasteners throughout 10" extended kickstand There is a lot of work in this bike, but I just don't have the time or need to get it back to show quality. 
    2016-07-12 04:43:42
    Cincinnati, Ohio, United States
  • 1971 Honda CB1971 Honda CB (1971)
    Up for sale is my 1971 Honda CB750. I've had this motorcycle for 4 years and purchased it from the second owner. The motorcycle runs great.
    2016-06-23 04:43:21
    Cincinnati, Ohio, United States
  • 1978 Honda CB1978 Honda CB (1978)
    1978 Honda CB550K has new tires, new honda OEM clutch cable, new throttle cable,new honda OEM hand grips,new oil and filter,new spark plugs,new seat cover,exhaust in great condition except lower left exhaust pipe has a hole about a inch wide four inches long see picture. Has new rubber boots from carbs to air box,Has new battery about a year old,front brake fluid has been changed,front caliper sticks occasionally but have new rubber caliper o ring to repair it. Inside of tank in really good condition,starts and runs well,doesnt get riden much may need carbs cleaned.
    2016-06-19 04:41:54
    Cincinnati, Ohio, United States
  • Honda CB 450 1974 K7 1,497 Miles Unrestored Very OriginalHonda CB 450 1974 K7 1,497 Miles Unrestored Very Original (1974)
    Honda CB450 K7 (1974) - I have owned this for about 15 years - I rode it one time, drained all the fuel then stored it in the garage. As far as I can tell, it is completely original except for the handgrips, fuel petcock, fuel lines and battery. The original "Gold Seal" tires are still on and original stickers are still present around the bike.
    2013-10-20 00:01:24
    Cincinnati, Ohio, US
  • 1984 Honda Night Hawk S CB700 SC1984 Honda Night Hawk S CB700 SC (1984)
    Motorcycle is all original except for the mirror. Plastic is in great shape for its age. 15K miles and runs strong.
    2013-09-26 22:45:01
    Cincinnati, Ohio, US

Honda CB Price Analytics

Moto blog

Honda has applied for a European Vehicle Type Approval for a new model

Fri, 06 Aug 2021

Earlier this year, a Japanese company patented the name and layout of the new NT1100 model. A while later, renderings of what a sports touring car with the engine and transmission from the CRF1100 Africa Twin might look like appeared on the network. Since then, no new information about the appearance of the NT1100 has been leaked, but just the other day it became clear that the model will be presented soon.

Honda has unveiled the 2022 CRF450RX

Fri, 04 Jun 2021

There are no crutial changes, the manufacture's engineers, with the help of factory racers, were fine-tuning the motorcycle. As a result, the enduro CRF450RX, like the cross-country CRF450R, received a retuned electronic engine control unit, as well as recalibrated shock absorbers, which had a positive effect on enduro handling.

Honda has announced plans to go completely zero-emission

Sun, 30 May 2021

The company President Toshihiro Mibe said that Honda is committed to being completely carbon-neutral across all of its products. To do this, the company is expanding the range of electric vehicles and has also developed a standard for replaceable batteries Honda Mobile Power Pack.

Looking forward to the NX200 - Honda's new touring enduro

Thu, 06 May 2021

It will be a real adventurer, only a small one. The motorcycle will focus on the Asian markets. These isn't much information about the bike yet, but it is preliminary known that it will be built on the CB190 platform and will receive a single-cylinder engine with a displacement of 184 cc.

The other day, Honda patented the name and layout of the NT1100 motorcycle

Fri, 12 Feb 2021

The Africa Twin parallel twin will be installed in another chassis - an asphalt tourist one. Unfortunately, at the moment there are no official pictures, only the fantasies of fans and third-party designers. Only one thing is clear - the engine will be 1100cc, and just like the CRF1100 Africa Twin touring enduro and CMX1100 Rebel chopper, the engine will be offered with both a conventional motorcycle foot-shift gearbox and a DCT robot.

Honda has updated its flagship GL1800 Gold Wing tourer for 2021

Tue, 19 Jan 2021

There are no radical changes, improvements have affected parts of Honda tourers that are important for ensuring the comfort of the rider. In addition, new color and graphic schemes have appeared for the 2021 models. The Tour version has Gunmeatal Black Metallic and Candy Ardent Red.

Honda introduced the European version of the MSX125 Grom 2021 model year

Sat, 12 Sep 2020

The legendary microbike received an engine that complies with Euro5 standards and significantly upgraded looks. In addition, the MSX125 will now also be sold under its own name Grom on the European market. Honda Grom received an updated 125cc single-cylinder engine with 9.6 horsepower, aggregated with a five-speed gearbox instead of the previous "four-speed".

Honda will introduce the new CBR600RR later this year

Wed, 08 Jul 2020

There has been no official information from Honda about the new generation CBR600RR yet, but it became known that the 2021 model will echo the older Fireblade in terms of its exterior. The "Six hundred" will receive a "two-eyed" LED head optics, the air intake will be located in the middle. Winglets will be added to the fairing to increase downforce at high speeds.

Honda has patented a technical solution from the arsenal of the Gold Wing tourer.

Thu, 02 Apr 2020

The modern Honda Gold Wing is equipped with a double wishbone front suspension, which not only increases ride comfort, but also allows the geometry of the motorcycle not to change during acceleration and braking. Lever suspension, which stabilizes the bahavior, may appear on other models of the company in the future. This is hinted at by patent images of similar systems integrated into the design of completely different motorcycles - the “classic” CB1100 and the small-capacity C125 Super Cub.

Little brother: Honda introduced a "nano version" of the X-ADV scooter

Sun, 11 Aug 2019

The model is called ADV 150 and, despite its similarity with the X, it has nothing to do with it. The engine is a single-cylinder with a volume of 149.3 "cubes", developing 14.2 hp at 8500 rpm and 13.8 Nm at 6500 rpm. Suspension is a regular telescopic fork and two Showa rear shocks.