Hd Shovelhead Ridgid Rolling Basket on 2040-motos

Harley-Davidson Other description

  HD Shovel Ridgid rolling Basket..Early Paughco Ridgid frame..35MM narrow glide with 19"drum brake front wheel..shovel 16" rear wheel with caliper,rotor and sprocket..5 gallon tanks with complete dash assembly..chrome oil tank..6" flat rear fender..9" solo seat with springs.inner+outer primarys and headlight w/brow...1980 80" shovel motor that I have most all the parts to compete up to the tops of the cylnders..no heads,oil pump or push rod tubes.and it will also need hardware a,rebuild and assembly.Case lip where inner primary mounts had damage and was repaired,so you'd have to repair it further if you want to run  a stock primary,e-start primary,since welding still needs contouring .Will need a couple heli cols there as well to run what comes along with it,which is a tin,non-estart priamry.....80 rottary top tranny that is 90%.....trans needs large rebuild kit and assembly..No primary drive parts...priamrys are empty..Engine#s run and are clean and clear...frame has no#s..True mileage is unknown...NOTE THIS IS A PROJECT MOTORCYCLE THAT DOES NOT RUN..IF YOU NEED TO ASK WHAT IT STILL NEEDS AND YOU CANNOT TELL BY LOOKING.THEM PROBOBLY THIS ISN'T A PROJECT FOR YOU..WILL COME WITH A BILL OF SALE ONLY...NO TITLE.!!..HAD TO WRITE CLEAR IN THE TITLE FIELD SINCE EBAY GIVES YOU NO OTHER USEABLE OPTION...SORRY FOR ANY CONFUSION.....ANY QUESTIONS,PLEASE CALL 707-292-3033



PLEASE READ...PAYMENT DO WITHIN 5 DAYS AFTER WHICH POINT YOU RECEIVE YOUR INVOICE...PLEASE DON;T PAY UNTIL YOU RECEIVE IT..IN ORDER FOR ME TO DETERMINE FREIGHT I WILL NEED YOUR COMPLETE ADDRESS AND ZIP CODE..THIS WILL HAVE TO BE CRATED AND SHIPPED SO A UPS OR USPS ESTIMATE OFFERED BY EBAY WILL NOT BE CORRECT SO DON'T BASE WHAT YOUR GOING TO PAY ON WHAT THEY TELL YOU...ONLY ON WHAT I TELL YOU IT WILL BE AFTER RECEIVING YOUR INFO..I WILL NOT SHIP FOR WHATEVER IT IS THEY TELL YOU..CAN CRATE,AND ARRANGE SHIPPING AND PROVIDE CUSTOMS SVCS THROUGH MY BROKER FOR OVERSEAS BIDDERS,OR YOUR WELCOME TO EITHER COME AND GET IT OR ARRANGE YOUR OWN SHIPPING/CRATING(PREFERRED).I CAN CRATE FOR $200.WOULD BE ABOVE AND BEYOND THE COST OF THE BIKE AND SHIPPING....PLEASE BE AWARE THAT WE ARE TALKING ABOUT AN IN-COMPLETE 34YR OLD PROJECT BIKE THAT NEEDS PARTS,MACHINE WORK AND ASSEMBLY..WHICH DOES NOT RUN...NOT SOMETHING BRAND NEW..PLEASE FEEL FREE TO ASK AS MANY QUESTIONS AS YOU NEED TO AND UNDERSTAND THAT.THIS IS AN AS IS,WHERE IS SALE AND THERE ARE NO REFUNDS..ONCE YOU RECEIVE IT,YOU OWN IT..I TRY MY BEST TO DESCRIBE EVERYTHING AS ACCURATELY AS I CAN BUT ALSO BE AWARE I AM HUMAN AND THEREFORE,MAY OVERLOOK SOMETHINGS OR FEEL THERE ARE SOMETHINGS TOO INSIGNIFICANT TO MENTION..THEREFORE UPON RECEIVING THIS PROJECT BIKE IF YOU FEEL YOU HAVE A PROBLEM WITH ANY PART OF IT,YOU MUST CONTACT ME FIRST BEFORE POSTING ANY FEEDBACK...NO EXCEPTIONS...I WILL DO MY LEVEL BEST TO TAKE CARE OF ANY PROBLEMS OR CONCERNS YOU MAY FEEL YOU HAVE..ANY QUESTIONS,PLEASE ASK THEM NOW..NOT AFTER YOU BID.THIS IS AN AS IS,WHERE IS SALE AND THERE ARE NO RETURNS.SO IF YOU HAVE QUESTIONS..NOW IS THE TIME TO ASK THEM....ASKING QUESTIONS AFTER THE FACT OR TRYING TO RE-NEGOTIATE AFTER THE SALE HAS BEEN MADE WIL NOT BE TOLERATED..AND FINALLY...IF YOU FEEL YOU CANNOT UNDERSTAND OR ABIDE THE TERMS I HAVE SET FORTH WITHIN THIS AUCTION PLEASE...DO  NOT BID...THANKS FOR LOOKING..