Find or Sell Motorcycles & Scooters in USA
  • custom, harley, bobber, chopper, S&Scustom, harley, bobber, chopper, S&S (2000)
    This bike was built before the start of the entire cookie cutter custom bikes you see out there, built by some company and they all look the same. It has an Atlas Pro Magnum Frame, to hold the horsepower this motor makes. The motor is a combo S & S and Harley motor, with all of the good stuff mixed in.
    2013-10-22 00:57:04
    Payette, Idaho, US
    0
    5,000.00
  • 2012 bobber , chopper, rooke , bar hopper , hardtail ,2012 bobber , chopper, rooke , bar hopper , hardtail , (2012)
    2012 rooke style bobber 113 Midwest ultima 6 spd ultima 2" ol school belt 250 rear This bike was finished mid summer 2012 and has estimated 500 miles on it , runs and drives perfect ,  The orange chopper in the last picture could also be had for $14,000.00
    2013-10-22 00:56:44
    Stillwater, Minnesota, US
    500
    10,000.00
  • L/RSV SANTEE CUSTOM SOFT TAIL REV TECH DRIVETRAIN 2004 1700 miles $25k PERFECTL/RSV SANTEE CUSTOM SOFT TAIL REV TECH DRIVETRAIN 2004 1700 miles $25k PERFECT (2004)
    CLEAN TITLED 2004 CUSTOM ON A SANTEE FRAME. REV TECH 100 MOTOR. BIKE WAS $25000 NEW IN 2004.
    2013-10-22 00:56:16
    El Dorado, California, US
    1,700
    710.00
  • CUSTOM BOBBER 1 OFF BUILD CHECK IT OUT!!CUSTOM BOBBER 1 OFF BUILD CHECK IT OUT!! (2007)
    This bike could be close to one of a kind. Want to turn some heads in the streets this is the bike for you. Want to enter it into a show this is the bike for you.
    2013-10-22 00:53:34
    North Las Vegas, Nevada, US
    500
    12,990.00
  • BOARD TRACK RACER BEAUTIFULBOARD TRACK RACER BEAUTIFUL (2011)
      Hi there, This bike was only driven approximatly 45 miles.  Its brand new.  There are still stubbs on the tires.  Its a wicked looking bike that runs great.  Fast as heck, loud as heck, and it turns every head on the road.  You will be the talk of any bike rally guarenteed.  It was built by TD Ward out of Missouri and shipped up to me.   He's a great bike builder that took second at the Sturgis bike build off and there are some pretty big names there.  Arlen Ness, Jessy James, etc.... and he took second!!!   And  I know for sure this build was one of his favorites!!! I'm sure it will be worth a ton in no time.  This bike will not let you down.  If I didn't need the money I wouldn't sell it.   I also have no time to ride.  Well, good luck bidding and Thank You, Shan.
    2013-10-22 00:41:53
    Wilkes-Barre, Pennsylvania, US
    45
    13,500.00
  • CUSTOM BOBBER 200MM SHOW WINNING PRO HOT ROD STREETROD NEW CRUISER 26CUSTOM BOBBER 200MM SHOW WINNING PRO HOT ROD STREETROD NEW CRUISER 26" FRT TIRE (2014)
      RODS & RIDES MOTORCYCLE COMPANY Saint Louis, MO USA   2014  200mm DROPSEAT  BOBBER      MSRP $29,995     TERMS OF SALE: This machine is ready to go and can be headed your way today, shipping is included or you can pick it up in person.   -200mm Paint: House Of Kolor Paint with Old School Pinstriping -Springer Front End   -Fat Spoke Wheels STD Frt. 26” Front W/ Whitewall and 18" Rear W/ 200mm Tire   -28 Ford LED Taillight    -Leather Seat Hand Made By World Famous Rich Phillips   -Murdered Package (Includes, Rocker Boxes, Headlight, Taillight, and primary drive)   -2 1/2" RR Exhaust W/ Black Wrap   -Engine: Ultima El Bruto Compition 140” 2305cc 175HP   -6 Speed LSD Transmission Black W/ Hydraulic Clutch - 12” Ape Hanger Style Bars Color Matching   -Primary 2” BDL With Outer Cover Contrast Cut -JB Quad Front Brake System All motorcycles carry a 1 year/unlimited millage parts warranty.
    2013-10-22 00:22:44
    Saint Louis, Missouri, US
    1
    29,995.00
  • ROLLING CHASSIS ,ROLLING CHASSIS , (1996)
    You are bidding on a very complete rolling chassis in excellent condition. I am the original owner, and primary builder. It has very low mileage because it was constructed to showcase the Keck 120 billet motors (which I also built), and was used at trade shows and events.
    2013-10-20 00:25:53
    Lagrange, Ohio, US
    282
    4,000.00
  • 2011 Custom Bobber2011 Custom Bobber (2011)
    2011 Custom Bobber 117 Mile Gray Powder Coat 200 Wide Tire Chromoly Frame ALL TIG Welded and USA Made 34 Degrees of Rake & 4" DT Stretch 107" SMW, Inc Nat Panhead 5 Speed Nat "Kicker" RevTech Transmission 60 Spoke Chrome Wheels or optional SMW, Inc. Billet Wheels SMW, Inc. Knuckler 3 3/8" Open Belt w/ Outer Bearing Support Custom Bobber Gas Tank, 9" High-Grade Steel Rigid Rear Fender Santee Chrome Shorty Pipes Black Leather Solo Seat 16' Chrome Ape Hangers Thunder Heart Wiring Harness and Electrical Chrome Front Headlight and Tail Light assemblies SMW, Inc.
    2013-10-20 00:25:17
    Saint Augustine, Florida, US
    117
    10,750.00
  • 2009 Chopper Bobber2009 Chopper Bobber (2009)
    2009 Chopper stripped down bobber with less than 3k miles. This bike is light, fast and fun as hell to ride. Comes with: Ultima Wolfdaddy Frame Harley 80 Evo Motor CV Carb recently rebuilt with sportster needle Arlen Ness Big Sucker Ultima Open Belt Primary WCC Villan Tank LA Chopper Risers w/ Flanders Bars PM Hand Controls New All Ballz Starter Push Button Starter New front tire No turn signals, no fancy wiring, low miles and strong running Harley crate motor.
    2013-10-19 00:53:40
    Miami, Florida, US
    3,000
    5,000.00
  • 2011 Rat Bobber 932011 Rat Bobber 93" S & S Shovel Paughco Frame & Springer Suicide Shift 3"BDL (2011)
      2011 Custom Rat Bobber 93" S & S Shovel Head, Super E Carb, Ultima 5 Speed, 3" BDL Primary, Suicide Shift, Foot Clutch, No Front Brake Paughco Frame and Chrome Springer, 21" Front Wheel and 16" Rear, Avon Venom White Walls, 11" Rear Brake, Sporty Tank, 18" Bars, Gator Seat Title is Clear Florida ASPT Bike has About 500 Miles Since Build Two Years Ago. No Odometer or Speedometer Very Fast and Fun to Ride. Please see pictures for details.
    2013-10-19 00:52:23
    Jupiter, Florida, US
    99,999
    9,250.00
  • Custom Bobber Chopper Harley Davidson Sportster Nice N Clean!Custom Bobber Chopper Harley Davidson Sportster Nice N Clean! (2000)
     This Custom Bobber I am listing for a friend. He is building a couple motorcycles and needs some extra cash to finish them. This is one awesome motorcycle with an awesome paint job.  It's a 2000 Harley Davidson Sportster 883 with a 1200 kit installed.
    2013-10-22 00:40:17
    Maumee, Ohio, US
    10,000
    5,500.00
  • Hardknock Kikker 5150 Bobber Chopper 3/4 Size 125cc Retro Knock 2009 + ExtrasHardknock Kikker 5150 Bobber Chopper 3/4 Size 125cc Retro Knock 2009 + Extras (2009)
    For sale is a 2009 Hardknock Kikker 5150 bobber style 3/4 size chopper with a 125cc gas engine that runs great. These motorcycles are bought in kit form from: kikker5150.com. You pick the rolling chassis than add the options you want to complete it.
    2013-10-22 00:40:09
    Myersville, Maryland, US
    0
    900.00
  • 2008 Proper Chopper 357 St2008 Proper Chopper 357 St (2008)
    2008 Proper Chopper Bobber 357 ST Our goal is to satisfy our customers. We stand behind every unit we sell.Top Line Information Year: 2008 VIN: 1P9S229568C522273 Make: Proper Chopper Stock: P04117 Model/Trim: Bobber 357 ST Condition: Pre-Owned Engine: 1753 cc Exterior: Black Transmission: 6 Speed Mileage: 7,326 VideoAdditional Photos* * * Click Photos to Enlarge * * * * * * Click Photos to Enlarge * * * Contact Steve Hollander Toll Free: 877-470-6111 Phone: (520) 747-8339 Description Looking for a Head Turning Motorcycle, that will Stand out from the Crowd, Then take a look at this Awesome, 2008 Proper Chopper 357 ST!! This Beauty is One of a Kind!!
    2013-10-22 00:40:15
    Tucson, Arizona, US
    7,326
    5,100.00
  • 2007 suzuki 800 bobber! not harley davidson but looks and sounds great for less2007 suzuki 800 bobber! not harley davidson but looks and sounds great for less (2007)
    I have here a suzuki s50 that I bought new in 2007 and am the origional owner of. Theese bikes make awesome bobbers! look at the internet and you will see great examples.
    2013-10-20 00:01:29
    Mount Airy, Maryland, US
    7,056
    845.00
  • CUSTOM BOARDTRACK BOBBER OLD SCHOOL RACER SHOW WINNING PRO HOT ROD STREETROD NEWCUSTOM BOARDTRACK BOBBER OLD SCHOOL RACER SHOW WINNING PRO HOT ROD STREETROD NEW (2013)
           Rods & Rides Motorcycle Company This sale is for a new 23" Boardtrack Racer Motorcycle order. The order will be ready for delivery within 6-8 weeks.  The motorcycle can be either delivered at our facility or shipped anywhere within the United States for $595.00 We are the only Drop Seat Bobber manufacturer licensed in all 50 states including New Jersey. We are also able to export to Canada and we are on the Australian registry.
    2013-10-21 00:15:37
    Saint Louis, Missouri, US
    1
    28,950.00
  • PRO SHOW BOBBER DROP SEAT 300mm FAT TIRE COMPLETE CHASSIS FRAME SET UPPRO SHOW BOBBER DROP SEAT 300mm FAT TIRE COMPLETE CHASSIS FRAME SET UP (2013)
           Rods & Rides Motorcycle Company This sale is for a new 300mm Drop Seat Bobber Motorcycle rolling chassis.  The frame can be either delivered at our facility or shipped anywhere.  (Wheels in pictures are available at extra cost) " SALE INCLUDES " - 300mm Dropseat Frame - Oil Tank W/ Cap - Rear Axle - Battery Box - Seat Mount - Rear Fender (Mounted) - Chrome or Black Springer Front End - Mini Ape Hanger Handlebars - Handlebar Risors - Traditional 60 Spoke Wheels (Chrome)  - 90/90-21 Avon Tire & 300/35-18 Avon Tires - Peanut Fuel Tank (Mounted) - License Plate / Taillight Mount - Forward Control Foot Mounts - Certificate Of Origin & 17 Digit VIN Stamped  **Please Read**Don't be fooled by other frames & chassis online, this is a complete chassis ready to go the the painter with no additional welding or fabrication needed.  VISA / MC  ACCEPTED To discuss details please call Rods & Rides By TD, LLC.   (855) ROD-RIDE T.D. Ward (314)-393-2123 Cell Picture of completed bike with this frame.
    2013-10-21 00:15:37
    Saint Louis, Missouri, US
    0
    7,595.00
  • CUSTOM BOBBER TRIKE HOT ROD STREETROD PRO SHOW LIKE NEW NO RESERVECUSTOM BOBBER TRIKE HOT ROD STREETROD PRO SHOW LIKE NEW NO RESERVE (2011)
    RODS & RIDES MOTORCYCLE COMPANY The FuKentrike is one of the wildest creations from Rods & Rides Motorcycle Company. The trike features the same performance and the same quality as the rest of the line up we build. As always the Ultima Performance El Bruto series engine is what the trike is built around. This engine produces 110 HP at the rear wheels.
    2013-10-22 00:40:22
    Saint Louis, Missouri, US
    99
    19,995.00
  • 2012 Custom Built Motorcycle Bobber2012 Custom Built Motorcycle Bobber (2011)
    One of a kind Special Construction Hardtail Old School Bobber - completed 2011. Have tons more pictures here:https://plus.google.com/photos/110483167355382798606/albums/5815749539318629361 Freddies Frames custom frame and springer front end, one off unique design. Paint by Hellbound Custom, Reno Air Race themed bike, with airspeed indicator for speedo.
    2013-10-19 00:38:30
    Riverside, California, US
    50
    15,995.00
  • sportster chopper bobbersportster chopper bobber (1994)
    I have up for sale a 1994 sportster I chopped awhile back.It doesn't have the standard sporty hardtail you can purchase for it.I grafted a OIF Triumph hardtail onto it to give it a very narrow profile.I built a good deal of parts for this bike including the nacelle,exhaust,handlebars,etc.the bike also has two 19'' wheels with new tires(less than 200 miles on them).The top end was rebuilt at a Harley-Davidson dealership with new jugs pistons and pushrod tubes.The bike is very dependable as i have rode it on multiple trips with no issues and rode it back and forth from work as a daily driver.The only thing is it leaks a little.And has signs of typical wear for a bike that is ridden.I have a clear florida title in hand.Thanks for looking. Parts list: David bird OIF Triumph hardtail,19'' 9 spoke mags,Michelin commander II's,Crane cams HI-4 ingnition module,H-D black LED light,Chain conversion,Redtail leather seat,powdercoated parts.Not a huge parts list,I tried to keep the bike as simple as possible.It only got what it needs to shoot down the road. I built this bike in my garage,I enjoyed building it and have enjoyed riding it even more.I have a slew of projects so im selling to fund my other toys.If your interested place a bid.
    2013-10-21 00:01:55
    Jacksonville, Florida, US
    8,500
    2,000.00
  • 2009 MARTIN BROTHERS CUSTOM BOBBER *CHOPPER*2009 MARTIN BROTHERS CUSTOM BOBBER *CHOPPER* (2009)
    Best Offer Available2009 Martin Brothers Custom Bobber Dream Machines of Texas - Contact Sales @ 972.380.5151 Top Line Information Year: 2009 VIN: MMWS2006MBBR31104 Make: Martin Brothers Model/Trim: Custom Bobber Condition: Pre-Owned Engine: 1340 cc V-Twin Exterior: Gold Transmission: 6-Speed Mileage: 800 Description972-380-5151 YOU ARE LOOKING AT A VERY NICE 2009 MARTIN BROTHERS CUSTOM BOBBER.  THE BIKE DOESN'T HAVE AN ODOMETER SO WE ARE SELLING THE BIKE AS NON ACTUAL MILES.  IT IS CUSTOM PAINTED BY JOE MARTIN GOLD FLAKE WITH BLUE AND PURPLE FLAMES IN COLOR AND POWERED BY A HARLEY DAVIDSON 1340CC (80") CARBURETED ENGINE AND 6 SPEED TRANSMISSION.  THE BIKE COMES WITH A MARTIN BROTHERS HANDMADE GAS TANK, OIL TANK, EXHAUST, REAR FENDER, FENDER SUPPORTS, HANDSHIFT, FOOT CLUTCH, BATTERY BOX, TOP MOTOR MOUNT/COIL COVER, AIR RIDE SEAT, TAIL LIGHT, FORK BRACE, NARROWED APEHANGER HANDLEBARS, CUSTOMIZED FRAME WITH 2" UP AND 2" OUT STRETCH, PRO ONE FORK ASSEMBLY STOCK SOFTAIL LENGTH WITH BRUSHED FINISH, BLACK BIKE WHEEL BRUSHED ALUMINUM 40 SPOKE WHEELS, 18X7 REAR, 21X2.15 FRONT, GMA BRAKES, FRONT BRAKE HAND CONTROLS, CUSTOMIZED THUNDERHEART FOOT CONTROLS WITH BRUSHED BACKING PLATES, 80" HARLEY DAVIDSON CRATE MOTOR WITH S&S VALVE TRAIN, RED SHIFT CAM, PORTED HEADS BY NATIONAL PRO STOCK AND PRO GAS DRAG RACING CHAMPION DAVE FEAZELL, S&S E CARB WITH THUNDERJET CRANE IGNITION, NOLOGY COIL, 6 SPEED OVERDRIVE TRANSMISSION, BRUSHED FINISH BDL BELT DRIVE, SPYKE STARTER, WESTBUY GAS CAP, MATT HOTCH KICKSTAND, REGINA GOLD CHAIN, PM HAND GRIPS, PBI REAR SPROCKET, AND 1 KEY.  THERE ARE NO SCRATCHES, DENTS, OR DINGS THAT I CAN FIND WITH THE EXCEPTION OF A MINOR ROCK CHIP ON THE FRAME SMALL CHIP ON THE REAR FENDER.  THE CHROME AND ALUMINUM ARE IN VERY GOOD CONDITION.  THE FRONT TIRE AND THE REAR 200MM HAVE GOOD TREAD LEFT ON THEM.   wE LOVE TRADES!!! *NATIONWIDE WARRANTY AVAILABLE!!! WORLDWIDE SHIPPING AVAILABLE!!!
    2013-10-17 00:13:20
    Dallas, Texas, US
    800
    15,475.00
  • CUSTOM BOBBERCUSTOM BOBBER (2009)
    THIS IS A VERY NICE AND FAST BIKE WITH A 114 TP MOTOR AND 300 REAR TIRE IT HAS A 6 SPEED TRANS. AND A NICE BLACK PAINT JOB CALL IF ANY QUESTIONS 434-386-7190 THANKS FOR LOOKING
    2013-10-17 00:12:33
    Bedford, Virginia, US
    100
    15,500.00
  • NEW FOR 2013!!! ANARCHY 200 SOFTAIL BOBBER BY CHIX CUSTOM CYCLES FOR CACC, REDNEW FOR 2013!!! ANARCHY 200 SOFTAIL BOBBER BY CHIX CUSTOM CYCLES FOR CACC, RED (2013)
    * Chix Custom Cycles Presents:   >>>No Reserve Auctions!!!<<< Quality parts at closeout prices... New. Used.
    2013-10-19 00:01:14
    Virginia Beach, Virginia, US
    5
    12,900.00
  • NEW FOR 2013!!! ANARCHY 200 SOFTAIL BOBBER BY CHIX CUSTOM CYCLES FOR CACCNEW FOR 2013!!! ANARCHY 200 SOFTAIL BOBBER BY CHIX CUSTOM CYCLES FOR CACC (2013)
    * Chix Custom Cycles Presents:   >>>No Reserve Auctions!!!<<< Quality parts at closeout prices... New. Used.
    2013-10-19 00:01:14
    Virginia Beach, Virginia, US
    5
    12,900.00
  • custom bobbercustom bobber (2012)
    Custom Harley Rigid Bobber- Professionally built- Kraftech frame, 80'' Evo style motor with a mild cam,Built on S@S cases and every thing else Harley OEM parts. Super E polished carb. 5 speed tranny linked to a BDL 3'' open belt.
    2013-10-20 00:01:43
    North Hollywood, California, US
    500
    3,000.00
  • Hot Rod Bobber ChassisHot Rod Bobber Chassis (2011)
    This is a no reserve auction for our Hot Rod Bobber Chassis.  This package includes a Polished 113" Ultima motor, polished 6 speed tranny, polished 3.35" open belt drive, Frame (30 degree neck and 0 stretch), Chrome Springer, 40 spoke powder coated wheels, tires, fuel tank, round oil tank with battery box, handlebars (pictured with 16" apes or drag bars your choice), risers, axles, spacers and neck bearings, The frame is completely tig welded and made in the USA. This set-up is a great start for a cool old school bobber that will eat crotch rockets for a snack.
    2013-10-16 00:14:27
    Toledo, Ohio, US
    0
    7,600.00
  • MMW NEW SCHOOL MOTO MAG MX TRACKER 26 FRONT , 200 REARMMW NEW SCHOOL MOTO MAG MX TRACKER 26 FRONT , 200 REAR (2013)
        MALIBU MOTORCYCLE WORKS  ALL OF OUR FRAMES , ROLLING CHASSIS AND COMPLETE KIT BIKES COME WITH 17 DIGIT FEDERALLY APPROVED VIN NUMBERS AND A MSO (MANUFACTURE STATEMENT OF ORIGIN ) FOR EASY REGISTRATION  WE SHIP WORLD WIDE  PLEASE CALL ME  818-300-4299 OR E-MAIL ME  FOR ANY QUESTIONS MIKE SIMS   WE STOCK OVER 50 PRE-ASSEMBLED ROLLING CHASSIS AND HAVE OVER 30 FRAMES IN STOCK TO BUILD YOU A CUSTOM ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION . WE STOCK OVER 10,000 PARTS AND STOCK EVERY PART TO THIS ROLLER INCLUDING COMPLETE DRIVE TRAIN PACKAGES ...THAT WE CAN MAKE INTO A E-BAY AUCTION  ASSEMBLED AND READY TO GO JUST FINISHED  MMW HOLESHOT NEW SCHOOL BOBBER   2013 MMW NEW SCHOOL MOTO MAG MX TRACKER 26 FRONT , 200 REAR   ,    ROLLING CHASSIS LEFT SIDE DRIVE   ,   , , RIGID ,35 DEGREE RAKE  ,2  INCH BACK BONE STRETCH 0 UP STRETCH, BLACK    FRONT END WITH    18X5.5 , 26 FRONT MOTO MAGS      WHEELS WE ALSO HAVE OTHER WHEELS TO CHOOSE FROM BLACK ,POLISHED OR CHROME FINISH .) .  BRAND NEW 200 ,26 FRONT TIRE  , 9 INCH WIDE   REAR FENDER , CAN BE SET UP FOR PASSENGERS, INTERNAL STRUTS , , NEW BEARINGS AND WHEEL SPACERS, SPECIAL MMW CUSTOM   GAS TANK ,,  , MMW   BARS    , RISERS , CHROME KICKSTAND WITH HIDDEN SPRING . OIL TANK , MOUNTAIN BIKE SPRING SEAT  NOTE : SHEET METAL HAS NOT BEEN MOUNTED    THIS ROLLER HAS BEEN EPOXY COATED FOR RUST PROTECTION     .
    2013-10-16 00:12:52
    Thousand Oaks, California, US
    0
    6,600.00
  • WEST COAST CHOPPERS OG 4 UP CFL 200 ROLLING CHASSISWEST COAST CHOPPERS OG 4 UP CFL 200 ROLLING CHASSIS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 25 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA BACK IN STOCK !!! WEST COAST CHOPPERS CFL !!!!
    2013-10-16 00:12:52
    Thousand Oaks, California, US
    0
    6,500.00
  • 1968 Triumph Bobber1968 Triumph Bobber (1968)
    1968 Triumph Bobber Built by our machinist 3 years ago, and has less than 1,000 miles on it.Bike has a bunch of cool custom fabricated parts, including bolt-on Hardtail Section, High Pipes, Aluminum Oil Tank, Sissy Bar, Forward Controls, Handlebars, Sprocket Carrier and Caliper Carrier, etc.Rear wheel has Stainless Disc & 4-Piston Billet Caliper with GMA Master Cylinder &Stainless line.Front Wheel is Triumph two-shoe brake cleaned & rebuilt with new shoes and bearings laced to a 21" Excell rim.Tires are Avon Speedmaster front and Avon Safety Mileage rear. Motor has been completely rebuilt from the crank up. Fresh bearings,bore & pistons, valves & guides. New clutch, primary chain, etc.Ignition is Boyer.
    2013-10-15 00:01:41
    Corvallis, Oregon, US
    1,000
    6,250.00
  • 2005 TITAN CUSTOM SPRINGER CHOPPER BOBBER FAT TIRE Von Zipper ONLY 841 Miles!2005 TITAN CUSTOM SPRINGER CHOPPER BOBBER FAT TIRE Von Zipper ONLY 841 Miles! (2005)
    2013-10-15 00:01:10
    West Palm Beach, Florida, US
    841
    7,800.00
  • Bobber 2005 MobsterBobber 2005 Mobster (2005)
    This is a cool bobber style bike built by Southern Motor Works in 2005 , it has only 4516 miles and its in great condition . It has a rev tech 100 , 6 speed trans ,200 mm rear ,16'' ape ,braided stainless wires and oil lines , 4'' primary belt ,also has  turn signals in front (not shown in pictures ) I took them of for the looks after inspection , its a fun bike and it runs great ,reason for selling is that Im getting a older panhead . Any questions or more detailed pics ,let me know .
    2013-10-14 00:07:41
    Tracys Landing, Maryland, US
    4,516
    3,050.00
  • custom bobber softtail style silver bullet- CHECK IT OUT!custom bobber softtail style silver bullet- CHECK IT OUT! (2002)
    2002 custom bobber / chopper/softail cruiser.5500 miles- ** 80 evo engine, 5 spd rev tech tranny ( kick start ), velocity stack on carb / pipes wrapped in black pipe cloth.new oil change, ** Amazing ghosted silver flames on paint job. ** new battery, runs great, sounds great and its CHEAP! Michigan assembled title.  **cheap insurance because of what i valued it at. kicks over on the first kick.everything works.
    2013-10-14 00:07:40
    Lansing, Michigan, US
    5,500
    510.00
  • 2006 pro street custom with 107 ci ultima engine with 500 miles2006 pro street custom with 107 ci ultima engine with 500 miles (2006)
    2006 pro street custom new ultima 107ci motor with 500 miles. new 0pen belt ultima primary and clutch. 5 speed trans.
    2013-10-17 00:44:19
    Summerfield, Florida, US
    500
    10,100.00
  • CUSTOM DROP SEAT HOT ROD PRO SHOW STREETROD MOTORCYCLE FULL SUSPENSION SWING ARMCUSTOM DROP SEAT HOT ROD PRO SHOW STREETROD MOTORCYCLE FULL SUSPENSION SWING ARM (2014)
     RODS & RIDES MOTORCYCLE COMPANY - R O L L I N G  C H A S S I S - This auction / sale is for a complete bike minus Engine, Exhaust, Transmission, and Primary. That means, everything else is ready to go... Painted, Lights, Foot & Hand Controls, Bars, Brakes, ETC SALE DOES NOT INCLUDE DRIVETRAIN CAN BE SOLD COMPLETE, CALL FOR DETAILS The "Anarchy Bobber" is a newest model and features some of the most advanced technology we have offered in the Drop Seat Bobber line up.
    2013-10-21 00:15:37
    Saint Louis, Missouri, US
    1
    9,995.00
  • MCS CUSTOMS FAT TIRE BOBBER ROLLERMCS CUSTOMS FAT TIRE BOBBER ROLLER (2013)
       FOR SALE IS A FAT TIRE BOBBER ROLLER. COMES WITH REAR FENDER, GAS TANK, HANDLEBARS, SEAT PAN, SPRINGER FRONT END, POLISHED WHEELS WITH MATCHING ROTORS, AND AVON TIRES. REAR IS A 300-40-18 AND FRONT IS A 120-70-21.
    2013-10-19 00:48:17
    Boyertown, Pennsylvania, US
    0
    2,750.00
  • 60's Vintage Bobber-Custom Built Rigid Frame Bobber/Chopper-479 actual miles!60's Vintage Bobber-Custom Built Rigid Frame Bobber/Chopper-479 actual miles! (1999)
      HD  Bobber/Chopper For Sale- like the "Billy Bike" This Bike was built to resemble the famous "Billy Bike" ridden by Dennis Hopper in the iconic "Easy Rider" Movie from 1969.  It has been a prolific Bike show winner and is a lot of fun to drive with the low seat height and 96" stroker motor!    Frame:   Paughco-Rigid Wishbone-35 degree rake-Custom Molded and painted   Gas Tank: Paughco-3 .25 gallon custom "flame"paintjob.   Forks:  Paughco-Springer -3" over extension- 35 degree rake-pull back "drag" style bars.   Wheels: Landmark-Rear Wheel-18" for 180 tire-Ball Hub-80 Spoke "diamond cut".
    2013-10-17 00:35:18
    Fort Myers Beach, Florida, US
    500
    14,500.00
  • 2009 Custom Copper on Black Bobber2009 Custom Copper on Black Bobber (2009)
    Beautiful Custom Bobber Bike was custom built in 2009 by Ultimate Cycles in Miami, FL. Specifications: Custom real copper springer front end. 113" Ultima engine.
    2013-10-19 00:16:13
    Hollywood, Florida, US
    1,100
    5,200.00
  • CUSTOM BOBBER FAT TIRE 300MM SHOW WINNING PRO HOT ROD STREETROD NEW CRUISERCUSTOM BOBBER FAT TIRE 300MM SHOW WINNING PRO HOT ROD STREETROD NEW CRUISER (2014)
      RODS & RIDES MOTORCYCLE COMPANY Saint Louis, MO USA   2014  DROPSEAT  BOBBER      ~SPOOKY HALLOWEEN SALE, ONE WEEK ONLY~ Oct 9th - Oct 16th   MSRP $24,995  SALE $19,995 SHIPPED TO YOUR DOOR  S a v e   $ 5 , 0 0 0. 0 0   TERMS OF SALE: This sale is for an order, please allow 6-8 weeks for complete build time.  The choices are yours for the following equipment options.   -300mm Paint: Mono Color Choice (Add $495 for Candy Colors, $995 for flames, and $195 for Pinstriping)   -Springer Frt End: Satin Black or Chrome (Add $495 for gloss or any other color)   -Chrome Spoke Wheels STD Frt.
    2013-10-21 00:15:37
    Saint Louis, Missouri, US
    0
    19,995.00
  • NICE BIKE 2010 Custom Bobber 100 cui RevTech 6 speed Jesse James Tank 1600 milesNICE BIKE 2010 Custom Bobber 100 cui RevTech 6 speed Jesse James Tank 1600 miles (2010)
    Custom Bobber -- This is one sexy bike!! Excellent condition! NEAR NEW!
    2013-10-19 00:02:00
    Bothell, Washington, US
    1,600
    7,100.00
  • 2013 Southern Boardtrack Old School Racer with 232013 Southern Boardtrack Old School Racer with 23" wheels rolling chassis (2013)
    2013 Southern Motorcycle Works Boardtrack rolling chassis.  Call 580-224-2888 or email with any questions.   FOR MORE INFO YOU CAN GOOGLE SEARCH SOUTHERN MOTORCYCLE WORKS In stock and ready to ship.   Allow 5 to 10 business days for packing and shipping times. Information on the roller: USA Made Tig Welded boartrack frame for 23" wheels No fab work necessary and is bolt together.  All welding and brackets are done for you prior to shipping USA Made 23" Elite Black Contrast Legend wheels with 23" front and rear Avon Cobra tires USA Made 11.5 Front and Rear Black Contrast Matching Legend Rotors USA Made 51T Black Contrast Legend chain sprocket USA Made Rear and Front axle kits USA Made Black Solo Seat with an anti-sore ass solo spring shock with a 300lbs load rating USA Made Custom Side Mount Oil Tank that just bolts to the frame USA Made Southern Custom made rear fender Black Billet Forward Controls and Hardware Cole Foster Gas Tank with flush mount cap Black or Chrome Springer Front end Black headlight and riser bracket Handlebars, risers, and Hardware Brackets and Hardware to set it up just like in the photo Paint is not included Comes with Manufactures Statement of Origin and 17 digit VIN Frame is for Big Twin or Evo motors Most Big Twin Softail Harley or After-Market parts will work with this chassis Shipping and freight charges vary so email for a quote Call 580-224-2888, email, or Google us at Southern Motorcycle Works with any questions Everything for $5995.00 plus shipping
    2013-10-14 00:04:54
    Ardmore, Oklahoma, US
    0
    5,995.00
  • Custom chopper/bobber RIGID 100 IN MOTOR 6 SPEED TRANSCustom chopper/bobber RIGID 100 IN MOTOR 6 SPEED TRANS (2007)
    CHASSIS DESIGN COMPANY 100 IN ULTIMA MOTOR 6 SPEED TRANS 200 REAR 21 IN FRONT BIKE IS FAST AND HANDLES REALLY GOOD RUNS GREAT 3 IN BDL BIKE HAS REALLY LOW MILES BEEN GARAGED FOR YEARS  
    2013-10-14 00:04:54
    Riverside, California, US
    3,000
    4,550.00
  • choppers inc billy lane built motorcycle bobber shovelheadchoppers inc billy lane built motorcycle bobber shovelhead (1983)
    Custom built bobber by Billy Lane of Choppers Inc. Custom frame, 1983 FXWG shovelhead with S&S Super E carb, electronic ignition, RevTech 4 speed transmission, custom finned oil tank, custom leather choppers inc seat, custom sissy bar, custom springer front end made by Boyd customs, custom handlebars with internal throttle, Fat Daddy wheels 21 & 16", Coker tire, Performance Machine hand controls and calipers, Jockey shift foot clutch, Custom exhaust, hand made headlight from billet aluminum, mid control foot controls, belt drive. MANY hours of fabrication work!
    2013-10-14 00:04:38
    Scottsdale, Arizona, US
    1
    7,000.00
  • 2006 Covington Custom Classic bobber FINANCING AVAILABLE & TRADE ACCEPTED WOW !!2006 Covington Custom Classic bobber FINANCING AVAILABLE & TRADE ACCEPTED WOW !! (2006)
      2006 Covington Classic Custom Bobber - 88ci Evo Motor - Chrome Springer Goose Neck Front End (cost $2000) - NEWER Avon & Dunlop Wide White Wall Tires Front & Rear (cost $400) - Classic 2-Tone Green Body w/ Yellow Pinstripe (cost $1000) - RPM Forward Controls (cost $400) - BDL 3 Open Primary (cost $1000) - Baker 5 Speed Transmission (cost $800) - Chrome Front & Rear Brake Calipers (cost $400) - Green w/ White Trim Springer Solo Seat (cost $300) - Front (21) Rear (16) 80 Spoke Wheels (cost $600) - Covington Custom Exhaust (cost $500) - Old School Grips (cost $50) - Fork Bag (cost $75) - Curved Tag Bracket (cost $150) - Bullet Turn Signals (cost $50) - Stainless Steel Brake Lines (cost $100) - The bike is in great running condition, and rides well. It has been through our service department, and has been serviced and inspected. In-House Buy Here, Pay Here Financing offered & Trades Accepted.
    2013-10-14 00:04:54
    Pinellas Park, Florida, US
    4,493
    6,650.00
  • BSA CUSTOM SHOW WINNING BOBBER VINTAGE CHOPPER TRIUMPH NORTON HarleyBSA CUSTOM SHOW WINNING BOBBER VINTAGE CHOPPER TRIUMPH NORTON Harley (1968)
     Here for your viewing is my BEAUTIFUL BSA Chopper!  This is an absolutely stunning custom built motorcycle. The engine built by legend brit bike specialist John York is from a 1968 Thunderbolt completely rebuilt, polished, and tuned to perfection!  The bike project was overseen and assembled with "Master Custom" builder Denny Berg in Southern California! The bike has snagged several awards and trophies at every show the most prestigious being "Best Rigid" honors at the Del Mar Concours!
    2013-10-03 22:34:25
    Atascadero, California, US
    1,500
    5,100.00
  • 2008 Custom Bobber2008 Custom Bobber (2008)
    Custom Build Chopper Bobber 2008 Cenzi Custom Chopper Build $38.000 in Value http://www.youtube.com/watch?v=VGT9sMVECl8   Build by Tony Cenzi in 2008 Only 700 miles perfect condition like new Engine 124 CC TP PRO SERIES Transmission Baker 6 Speed Won #1 Best Bobber 2008 All cables inside the frame (nothing on the exterior) Eye catcher Contact George 847 505 6777 By sale by owner      
    2013-10-22 00:40:32
    Schiller Park, Illinois, US
    700
    12,200.00
  • 2009 Johnny Pag Custom Bar Hog Original2009 Johnny Pag Custom Bar Hog Original (2009)
    I'm selling this bike for my next door neighbor, who rarely rides it since he has too many toys to play with.  I can attest to the quality of the bike and the condition and that the bike has been professionally maintained by a local shop.   Here are the specs.
    2013-10-02 13:30:28
    Rumson, New Jersey, US
    500
    4,500.00
  • HONDA BOBBER BAR HOPPER chopper w/ Harley wheels CUSTOM BIKEHONDA BOBBER BAR HOPPER chopper w/ Harley wheels CUSTOM BIKE (1980)
    Up for sell is a custom loosespokz two seater bar hopper. your choice of tank, silver Honda tank or blue distressed tank with fuel gauge bottle. Bike has RC billet wheels and custom air bagged twin seat.
    2013-10-02 02:53:53
    High Point, North Carolina, US
    100
    6,999.99
  • HARLEY CHOPPER / BOBBER PROJECTHARLEY CHOPPER / BOBBER PROJECT (1979)
    YOU ARE BIDDING ON A 1979 HARLEY CHOPPER / BOBBER PROJECT THIS IS A CLEAR TITLE, ALL MATCHING NUMBERS 1000CC IRONHEAD SPORTSTER… I BOUGHT THIS BIKE FROM A GOOD FRIEND ABOUT 7 YEARS AGO. IN THE PIC’S YOU CAN SEE WHAT IT LOOKED LIKE WHEN I GOT IT, MILDLY CUSTOMIZED WITH PAINT, PIPES, WHEELS, CARB, SEAT & BARS… HE WAS TOLD THERE HAD BEEN SOME MILD ENGINE MOD’S BUT WAS UNSURE EXACTLY WHAT HAD BEEN DONE. ALL I CAN TELL YOU IS THE BIKE RAN VERY STRONG.
    2013-10-02 01:01:55
    French Lick, Indiana, US
    999,999
    1,125.00
  • Custom Harley Bobber 2010Custom Harley Bobber 2010 (2010)
    This is a custom built bike, S&S lower end on the V-Twin motor, 97" axtell jugs are bored out and 10:1 pistons with a hopped up cam.  This bike moves quickly, lots of torque and well balanced.  Breaks have been gone through and stops on a dime.
    2013-10-01 22:13:05
    Winterset, Iowa, US
    1,700
    9,000.00
  • Custom South Florida Choppers Built Bobber with Springer Front and Ridged frameCustom South Florida Choppers Built Bobber with Springer Front and Ridged frame (2009)
    Built in 2009, only about 2000 miles on it.  Runs and rides great.  The bike is very cool and gains attention where ever you take it.  Has twisted Spokes, 1340 HD EVO, Powder coated frame and tins, front and rear brakes, springer front forks, wife white walls, custom exhaust.  I will deliver it anywhere in south Florida.  Buyer must make arrangements for transportation outside of Florida.  
    2013-10-01 15:40:37
    West Palm Beach, Florida, US
    2,000
    4,550.00
  • 2007 Custom Bobber w/100 Inch RevTech and Six Speed2007 Custom Bobber w/100 Inch RevTech and Six Speed (2007)
    Custom 2007 Bobber. Six speed 100 inch Revtech. 6,900 miles.
    2013-09-30 01:00:32
    New Palestine, Indiana, US
    6,900
    13,000.00
  • Custom Show MotorcycleCustom Show Motorcycle (2011)
    Up for Auction an awesome built 2011 Custom Show Motorcycle Bobber style motorcycle built on a Kraft Tech soft tail frame 113 cubic inch motor, 6 speed tranny, open belt primary- all by Ultima 5 spoke wheels, discs, pulley - all by RC Components LePera seat Wild Ones Outlaw handlebars Metzler tires Indian Larry gas tank Performance Machine brakes Vance and Hines Big Shot Shorts exhaust Front fender(not shown in photo's) Custom paint by Mike Meyers This bike is for sale or trade. Will listen to any to your offers. Contact Jack 515-577-8291 Buyer responsible for shipping or will deliver to lower 48 for $500.00 Good Luck Bidding    
    2013-09-29 21:27:09
    Ankeny, Iowa, US
    325
    18,000.00
  • Rare Zero Engineering Type 5 Bobber - 113ci S&S - No ReserveRare Zero Engineering Type 5 Bobber - 113ci S&S - No Reserve (2009)
    To my memory, this is the first time in years that a custom Zero Engineering bike has been listed on Ebay (and not via private sale or brokerage). I purchased this bike in 2009 and placed it in the front lobby of my family-owned company office. It lived there for 3 years as decoration, and I took it out to ride around the parking lot occasionally on the weekends, or to get it serviced.
    2013-09-29 02:02:55
    Boston, Massachusetts, US
    2,646
    15,000.00
  • Custom Bobber Chopper Built by Chop Machine Harley Davidson Sportster 1200Custom Bobber Chopper Built by Chop Machine Harley Davidson Sportster 1200 (1999)
    We use only quality parts on all of our builds.  Please feel free to set up an appointment to see the bike.  If you think the pictures look good you should see it in person. This bike is so much fun to ride.
    2013-09-29 01:22:35
    Toledo, Ohio, US
    12,877
    6,865.00
  • AWARD WINNING CUSTOM DARWIN BRASS BALLS BOBBER W/ HARLEY EVO MOTORAWARD WINNING CUSTOM DARWIN BRASS BALLS BOBBER W/ HARLEY EVO MOTOR (2007)
    MINT CONDITION DARWIN CUSTOMS BRASS BALLS BOBBER; ORIGINAL OWNER; LESS THAN 500 MILES; TAKEN TO LOCAL BIKE SHOWS; AWARD WINNING CUSTOM BUILDER DAR HOLDSWORTH HAS WON CUSTOM BIKE EVENTS AT STURGIS AND ATTENDS ANNUALLY WITH HIS LINE; FEATURED IN SEVERAL BIKE MAGAZINES. CUSTOM BUILT FOR ME. H-D EVO ENGINE 1340 CC HOPPED UP W/ CAM; 6 SPEED ULTIMA TRANNY; SPORTSTER TANK;  80 SPOKE FRONT AND REAR WHEELS;METZLER 880E TIRES - 200 ON BACK; HEADWINDS HEADLIGHT;DIAMOND TAILLIGHT; PM CONTROLS;CUSTOM PAINT WITH DESIGNS.; ONE OF A KIND WILL GET YOU MANY LOOKS; CUSTOM MADE CERAMIC COATED STEP TUNED DRAG PIPES; RICH PHILLIPS HAND TOOLED LEATHER SEAT; A REAL BAD BOY!
    2013-10-19 00:30:07
    Waterbury, Connecticut, US
    450
    13,550.00
  • Lucky 7 Choppers - Custom chopper/bobber - 96 S&SLucky 7 Choppers - Custom chopper/bobber - 96 S&S (2007)
    THIS MOTORCYCLE WAS CUSTOM BUILT BY A PROFESSIONAL BUILDER AT LUCKY 7 CHOPPERS, CA. BEAUTIFUL PAINT JOB, 4K INVESTED! FEEL FREE TO STOP BY AND CHECK IT.
    2013-09-28 01:24:35
    La Jolla, California, US
    3,000
    12,666.00
  • 2010 Indian Larry 2010 Indian Larry "Tribute" Bobber (2010)
     2010 Indian Larry Tribute Bobber: PYROMANIAC Hand built custom which took over 820 man hours. Built on frame #17 of the legendary “twisted down tube” frames built by Indian Larry. Only 1 mile!
    2013-09-27 23:51:36
    Salt Lake City, Utah, US
    1
    21,211.00
  • Custom Built Motorcycle, chopper bobber no reserveCustom Built Motorcycle, chopper bobber no reserve (2013)
    I am selling my Custom built bobber, It is built with American made parts, I did not go cheap on this bike. It is built from the highest end parts. The thing handles like it is on rails, rides very nice.
    2013-09-27 17:46:51
    Garden City, Idaho, US
    200
    5,800.00
  • 2012 CUSTOM CHOPPER / BOBBER2012 CUSTOM CHOPPER / BOBBER (2012)
    2012 COMPLETE CUSTOM BOBBER 113 S&S MOTOR MOTOR IS BUILT WITH ALL S&S PARTS. S&S SUPER G CARBURETOR ULTIMA 6 SPEED TRANS ULTIMA IGNITION SYSTEM. THE BIKE WAS JUST COMPLETED IN OCTOBER 2012.
    2013-09-27 13:10:55
    Rancho Cucamonga, California, US
    20
    10,900.00
  • 1993 89c.i. Sportster,bobber,custom Harley1993 89c.i. Sportster,bobber,custom Harley (1993)
    Just completed 1993 89c.i. EVO sporty.89 inch S&S Big bore kit (flywheels,rod's,piston's,cylinders,adjustable pushrod's).Andrew's cam's,Crane Ing,S&S E carb.Motor is set in a candy red powder coated Krafttech frame with a DNA springer front end,Invader wheels(These wheels are not Knock off's) with new Avon Cobra tires. The rear has a DNA sprotor set up the front is a spool.(N0 front brake) Cole Foster Salinas Boyz Fuel tank,Krafttech oil tank.The pipe's are Bassani sweeper's.The bike has a new H-D stator,CCI regulator and a new sealed H-D battery.The title match's motor with m.s.o. for the frame.This was a split case build from the ground up with nothing left untouched.
    2013-09-26 23:45:19
    Sarasota, Florida, US
    100
    10,500.00
  • MMW OLD SCHOOL OG 200 BOBBER RIGID ROLLING CHASSISMMW OLD SCHOOL OG 200 BOBBER RIGID ROLLING CHASSIS (2013)
             MALIBU MOTORCYCLE WORKS ALL OF OUR FRAMES ,ROLLING CHASSIS AND KIT BIKE COME WITH 17 DIGIT NUMBER THAT ARE FEDERALLY APPROVED WITH A MANUFACTURE STATEMENT OF ORIGIN (MSO) WE SHIP WORLDWIDE WE STOCK OVER 75 ROLLING CHASSIS THAT ARE PRE-ASSEMBLED AND HAVE OVER 30 FRAMES TO BUILD YOU A ONE OF KIND ROLLING CHASSIS OR COMPLETE KIT BIKE THAT WE CAN MAKE INTO A E-BAY AUCTION  TAKE A GOOD LOOK AT THIS ROLLING CHASSIS, THIS IS NO BIKE IN A BOX CHEAP JUNK, WE ASSEMBLE EACH ONE TO MAKE SURE EVERYTHING FITS AND WORKS .WE SPECIALIZE IN MAKING ONE OF A KIND KIT BIKE FOR YOU TO BUILD PLEASE CALL OR E-MAIL ME WITH ANY QUESTION  818-300-4299 MIKE SIMS  WE CAN MAKE THIS ROLLER A KIT BIKE FOR YOU WITH EVERY PART NEEDED TO FINISH THIS BIKE INCLUDING  WIRING HARNESS,OIL LINES AND FITTING. JUST CALL OR E-MAIL US AND WE WILL PUT A  CUSTOM PACKAGE TOGETHER FOR YOU THAT WE CAN MAKE INTO A E-BAY AUCTION  MADE IN THE USA   SET UP FOR BIG TWIN EVO , WE CAN ALSO MAKE IT FOR SHOVELHEAD AND PANHEAD  2013 MMW OLD SCHOOL OG 200 TIRE BOBBER    .SET UP FOR HARLEY FACTORY AND AFTERMARKET EVO MOTORS .  RIGID ROLLING CHASSIS  SET UP FOR CHAIN  OR BELT  ,30 DEGREE RAKE   ,0 INCH BACK BONE STRETCH, 0  UP STRETCH ,,  LEFT  SIDE DRIVE ,   CUSTOM  OIL TANK /  ,  SPRINGER FORKS       (OTHER FRONT ENDS AVAILABLE OLD SCHOOL SPRINGER , ,CONVENTIONAL),   18X8.5 , 21X2.15   MMW WIRE  WHEELS  ( CAN SWAP OUT WHEELS FOR OTHER STYLES ).   FRONT AND REAR AVON    TIRES  ,      ,, NEW BEARINGS AND WHEEL SPACERS,  , CUSTOM   MMW GAS TANK  (SEVERAL TO CHOOSE FROM) ,  REAR FENDER ,  RISER,RAPED APES BARS ,  , KICK STAND NOTE :THE SHEETMETAL HAS NOT BEEN MOUNTED   .
    2013-09-26 23:59:33
    Thousand Oaks, California, US
    0
    3,600.00

Bobber Bobber Price Analytics