Pro Street Pro Street Motorcycles, page #5

Special construction harley for sale.  This is a very nice bike built with some of the best components. -Santee frame-Legend air ride-Corbin seat-Performance Machine wheels, brake rotors/ calipers, hand controls and passenger pegs-Accutronics forward controls-21" front wheel 18"x180 rear-BDL open primary-S&S 100" engine just rebuilt...

2002 Ron Simms custom, 131'' thug engine, 6-speed baker trans, BDL belt drive primary, 240mm rear tire, 18'' pm wheels, 13'' pm rotors, pm hand controls and foot controls, signature pm Simms calipers, legend air ride, Simms Thunder header pro-pipe. New parts include all brake lines, throttle cables, clutch cable, speedo cable, oil lines, fuel lines, fork seals and dust covers, fork oil, rotor bolts, pulley bolts, seat pan and upholstery, pm grips, handlebars, gas tank bolts, hand control switches, indicator lights, turn signal lens, headlight and visor. Re-chromed parts include triple trees, hand controls, center of floating rotors, primary cover, brake light mount, rear turn signals, axel covers, rear pulley,  front axel covers, Storz forks where rebuilt,  polished and anodized black. I had the engine rebuilt and polish $2400.

2006 WIld West Dragoon. Excellent Condition, 128 Patrick Racing Motor, Jims RT side drive, Baker trans, all high end components, 300 Rear, 21" Front, 43 Deg Rake, drop seat, oil in frame, (has a very small leak under gooseneck) 7200mi. comes with manual, NADA lists @ 41K. 

                     "THE GRINCH"                       2001 CUSTOM  ROLLING THUNDER / ARLEN NESS PROSTREET SOFTAIL       ROLLING THUNDER PROSTREET SOFTAIL 250 FRAME TP SHOW POLISHED 116" MOTOR SHOW POLISHED 5 SPEED TRANSMISSION 2 1/2 CLOSED, DRY PRIMARY DRIVE LEGEND ADJUSTABLE AIR RIDE REAR SUSPENSION WITH ON BOARD COMPRESSOR BIKE CAN BE RAISED OR LOWERED WITH THE FLICK OF A SWITCH WHILE RIDING IT! ZOOMIE PIPES 250 REAR TIRE ALL CHROME PLATED BILLET EVERYTHING ON THIS BIKE IS EITHER ARLEN NESS OR ONE OFF HANDMADE THIS BIKE TOOK 13 MONTHS TO BUILD. PARTS ALONE WERE $50,000.00 ...WITHOUT DESIGN AND LABOR LOOK CAREFULLY AT THE PHOTOS....

  Custom built by the late Bryan Hagan of Iron Thunder Cycles.  This bike was built to take to shows…has less than 700 miles on it!!!! War Eagle pro-street Wrath frame (soft tail) Matte black finish Ultima 107ci motor Dual profire coils 3” belt drive primary with custom cover Braided copper lines throughout Copper plug wires 240 rear tire Adjustable swing arm shocks Custom, one-off handle bars Custom, one-off headlight Odins mirrors Incredible matching grips and pegs   Receipts totaling over $31,000!!!

Big Bear Athena 2007 ,Purchased beginning of 08.  4500 Original  miles • Proprietary patented mid-section stretch in the frame for better weight distribution and handling • Super low neck height with an aggressive 44° rake for a long -n- low awe-inspiring stance • Slammed seat height of 20" that enhances the riding senses and enables low speed confidence • Unique radius dual downtubes and stretched backbone • Creative and patented fuel tank that meets seamlessly into the seat • Patented oil tank holds 5 quarts of oil for engine optimization • Dramatic rolling fenders that finish off with a point • Famous and patented ™ swingarm •Xtremely  Comfortable  Pull back  handlebar design Component Features: • 100” Low Vibration Polished Engine at 112 lbs. of Torque, Top Quality S&S • 6-Speed  Top of the line Baker  Polished Transmission •  wheels 21" Front and 300mm Rear Tire •Xlnt Rubber on  Both tires. • Cosmetically and mechanicly perfect.

SOFTAIL"  Big Bear Pro Street Chopper. Pampered (lives in the garage) Low actual miles. 3k in the last 5 yrs 100 cubic inch very strong reliable engine.

I BOUGHT THE BIKE FROM A CAR DEALERSHIP HERES WHAT I WAS TOLD. IT HAS A 131 H&K MOTOR,BAKER 6 SPEED,3 1/2 PRIMO BELT DRIVE,AIR RIDE SUSPENSION,ALIGATOR SEAT,140 FRONT AND A 280 BACK TIRE. EVERTHING ON BIKE IS TOP OF LINE PARTS AND DID EXCELLENT ON BUILD,BIKE RUNS AND LOOKS GREAT.

 **********RESERVE LOWERED********** LOWERED BUY IT NOW PRICE  IF YOU SELECT BUY IT NOW I WILL PAY FOR SHIPPING TO THE LOWER 48  Trades Possible for Muscle Cars, Classics, etc...    (Trades plus cash either way may work as well)   OPEN TO REASONABLE OFFERS!      Custom Built Dropped Seat Soft tail Chopper, by Biker Dreams of in Alpharetta GA.   This bike had a $65/70,000.000 build sheet.     TC-250 DROP SEAT SOFTTAIL FRAME & STRECHED GAS TANK, BY EDDIE TROTTA / THUNDER CYCLE DESIGN (Fort Lauderdale, FL)    Custom Front Forks, Hawg Halters Brakes,     One off Custom Cut wheels.

500.00 DUE AT SALE CLOSE.WITHIN 24 HOURS    REMAINDER DUE WHEN PICKED UP. WITHIN 5 DAYS

I’m getting old and it’s time for my “ZROD” to go.  I built this bike 10 years ago and every couple of years I would work on something for her.  Paint, engine, tranny, frame, lights, ect.  You can read the attached appraisals and the pictures really show the work in this bike.  The Ultima 127” engine with a custom dual Ultima R1 carb’s is matted to a Baker “Torque Box”. 3”BDL Primary to a 530 Chain final drive with a Russell Mitchell “Sprotter” brake setup on a 17" x 200mm rear tire.  The front end is a Pauco 4” over Springer front end with a Wind Vest fairing on a 21" front tire.  Handle bar controls are Arlen Ness with Bad Lands Mirrors.  These are the mirrors that have the gages in them.  The chin spoiler is also a 3.5 quart oil tank.  I’ve never seen the temperature above 220° The Exhaust is Thunderheader that I added an O2 sensor to.  The readout is under 1 of the speaker covers on the dash.  The other speaker cover is blank. (no speakers either – I was going to add them, but the bike is too much fun)  It has the Legends air ride setup on the Pro-one 4 link rear end.  The transmission utilizes the Baker built-in ignition kill switch for FULL-THROTTLE shifting by foot or Jockey.  The Rat Fink even lights up.  There are (2) 300cca batteries under the seat to roll the motor over using the 2.4KW starter.  Be very clear that this bike is fast.  It’s not for beginners!!!!  In the right hands you’re the king of state.  I’ve dyno’d it at over 120 HP to the rear wheel and have run a 10.7 sec ¼ mile on the Teressi Dyno Drags.

For Sale: 1 Custom built 2005 Kenny Boyce Pro Street FXR, I recently bought a 2013 Street Glide for better family use so now its time for the toy to GO...Over $34K invested.   2,400 original miles One of a kind custom paint 127 CI Elbruto Motor,140 horse power at the rear wheel Paul Yaffe crack pipe exhaust 5 Speed tranny All welds have been molded Very clean wire harness Serious inquiries only, priced to sell and show off at the 110th Harley Anniversary!!! Please contact James @ 414-581-6900      

3" open primary drive, 6 spd baker trans, softail, 107 S&S motor, custom intake filter, good tires, no scratches or dings, 5K miles, runs and drives great. call or text 607-215-1967 will consider any reasonable offer. I just don't ride it any more.

  it has been time to sell my show piece for awhile. i built it a few years ago as a fun project and to maybe make a little extra money with it. thanks for the bottom dropping out on choppers halfway through the build, i am basically just looking to get some of the parts cost back out of it.

2005 Saxon firestorm, Prostreet model, excellent condition. Soft tail, S&S motor, 6 speed trans, 250 rear tire, belt drive runs strong, runs great. Displacement 96 ci; 1566cc, Electronic Ignition, Frame Stretch 0" downtube, 4" backbone, Speedometer Digital with integrated tach Rake 40° neck 5° tree; 45° $ 14,000

Available for you to consider is a ONE OFF CUSTOM!!! A very nice Motorcycle in great shape. This 1998 CMC is one fast, great looking motorcycle that needs to be seen to appreciate.

I JUST FINISHED THIS CLEAN LITTLE BIKE..RUNS AND RIDES GREAT!! SOUNDS VERY NICE THRU THOSE LONGSHOTS!! MOTOR IS A FRESHENED UP 03 TWIN CAM...NEW CAM TENSIONERS..ADJUSTABLE PUSH RODS,ECT...ALL NEW IGNITION..BATTERY....PAINT IS EXTREMELY NICE...JUST A HINT OF TRU-FLAME....NOT TOO MUCH...LOOKS BEAUTIFUL!!

I received several questions asking why I'm selling the bike, simple answer, I'm going to ride more cross country and want to buy a street glide. It has a clear Washington state title Beautiful custom pro street style motorcycle with over 50k into it. Several times I have caught people video taping me while riding.Users with feedback under 5 need to contact me prior to bidding.

heres a great bike at a stupid low price your going to steal.has an s&s 96 inch motor with 5 speed trans and a 3 3/8 primary drive.s&s carb,190 rear,21 front and the list goes on.runs perfect and the motor and primary are worth more than the buy now price.this bike is fast and not for the newbe's.no smoke or knocks and rides,steers,shifts,brakes as it should.a ton of cash in the build.dont have the front fender and was going to put on a different style but havent got to it.this is way below 1/2 price it would cost you to build a bike like this so dont snooze on the deal.not sure of exact miles and put in what is on the speedo.a lot of past buyers have used U SHIP for transport and seemed to be reasonable or bring a plate and ride it home.i may also be able to deliver on a day road trip for a fee.so if you want a bike that wont break the bank here it is.

Here's the details on this Pearl yellow low softail prostreet.  100'' rev tech . CCI 3'' open belt drive.

      110 HARLEY MOTOR WITH BAKER 6 SPEED, HARLEY ELECTRICS AND RUNNING GEAR,RC WHEELS,VANCE AND HINES EXHAUST,SMALL WINDVEST WINDSHIELD. HAS A 300 MM REAR TIRE AND A RIDE RACK,BACK REST.   NO RESERVE

Up for Auction is my 2002 Custom ProStreet Motorcycle. This bike is a one of a kind built from the frame up so you will never see another one like it anywhere. To build this bike in parts alone without labor would be over 35K. I will list the specifics of the bike below but my favorite things about this bike are definitely the Goldammer Front Forks, TP 124" Engine, custom paint, right side drive and the way it handles and drives for a hardtail.  This bike turns heads and is talked about everywhere it's been.

Bike was built as a show bike for my shop. Only the best parts were used, all Arlen ness parts with S & S motor. Bike has never been titled and only break in miles on motor and trans.

Condition: Excellent condition V8 Kannon Motorcycle. Features One of the only 502s built by Kannon Motorcycle. This bike is in excellent condition, never laid down.

ARLEN NESS COMPONENT with a 145 ci S&S "Tribute" motor, Super G Carb housed in the ARLEN NESS RUBBER MOUNT Y2K FRAME. This frame/chassis is one of  only a few that can hold the 145 ci monster, yet with a Pro Street geometry , 250 Avon rear tire, it rides and handle very well. Its truly amazing.

Very nice custom bike from Johnny Pag. Selling because I am looking to get a moped/scooter instead and pay a few bills. Runs like new.

2011 Pro Street Custom Built Motorcycle Original Cost $45,000 Pro Street Frame Custom $10,000 Paint Job Edelbrock Engine Producing a lot of HP Mukuni Carb Custom Exhaust Custom Chrome Wheels with Brembo Disc Brakes Avon Tires Fully Adjustable Rear Air Shocks Boyce Open Belt Drive Everything Chromed Out   You are looking at a one of a kind custom built Pro Street Motorcycle. This bike cost in excess of $45K new. It is in showroom condition with no expense spared.

Up for sale a custom built rolling motorcycle chassis. It is a pro street frame. Streched 6" in back bone and 0 stretch in downtube.

WILL DELIVER WITHIN 250 MILES FOR A FEE OF 100.00                                 NO RESERVE   STORZ 54MM INVERTED FORKS   113 S+S G-CARB WITH NOS 6 SPEED 4" KARATA OPEN BELT CARLINI TORQUE ARM DYNA DUAL COIL SINGLE FIRE PERFORMANCE MACHINE WHEEL BRAKES FOWARD CONTROL VANCE AND HINES SHORT SHOT EXHAUST SPYKE STARTER DAKOTA DIGITAL GAUGES 2" CHUBBY PULL BACK BARS 6 GALLON TANK CERTIFIED 169 HORSEPOWER WINDVEST ANY QUESTIONS PLEASE CALL JEFF AT 702 809 9107 , OR EMAIL @ JG99RK@YAHOO.COM

 2011 BIG BEAR VENOM PROSTREET CHOPPER. THIS BIKE HAS LESS THEN 2000 MILES ON IT AND SELLS NEW FOR OVER $35,000.00 REVTECH 113 ULTIMA EVO STYLE ENGINE WITH A 6 SPEED TRANSMISSION. 3" BDL OPEN PRIMARY. BIKE DOES AVE PEGGS AND A SUCTION CUP SEAT THAT GOES ON REAR FENDER FOR A PASSENGER.

This 1998 custom Kenny Boyce Pro Street FXR has it all! 103 c.i. STD rubber-mount, V-twin, large-bore motor with dual plug heads; Street cam; 5-speed tranny; MACHINE PERFORMANCE BRAKES; KENNY BOYCE FXR FRAME with custom leather seat; custom stretch tank with base coat/clear coat paint; AKRON Rims; ARLEN NESS controls, cam and tranny covers, and other options; passenger pegs; BUB pipes; GMA stabilizer bar; PRO CYCLE auto meter tach.; JOKER front turn signals; auxiliary starter; ABS front and rear fenders with recessed ARLEN NESS tail light (there is a repair to a small crack that appeared on the right/rear fender, due to the over-tightening of the fender bolt below the strut.

This is a 2006 MGS PRO STREET CHOPPER. It was built with no expense spared.  Absolutely amazing bike!  here is a list of some of the bike's features : Lowlife frame with  MGS molded down tube MGS tank, fenders, pipes, and molded rear parts Legend air ride  suspension 121" TP Engineering "PRO SERIES'" engine Baker six speed trans ( belt drive) Accutronix & PM  hand and foot controls w/hydraulic clutch Headwinds headlight Custom Airbrushed paint with candy red base coat Danny Gray Croc seat Custom one off wheels 21" front 18" rear  with a 300mm tire speedo/ odometer gauge built into bars hidden wires    and more...... --------OVER $ 65k  when built-------- Bike is All Chrome and airbush.  NEEDS TO BE SEEN IN PERSON TO APPRECAITE IT!!

  For Sale, 2008 Pro street Softail Motorcycle Frame:  Softail 40* Rake, 4 inch stretch in backbone, -2 in down tube Handlebars: V design made for 40* rake Diablo Cycles    Engine: 2008 Ultima 127 c.i.    10.2 to 1 comp.    Mikuni 45mm Carb Transmission: Accessories Unlimited RSD 6 Spd     Sheetmetal: Gas Tank-Kraft tech Pop up gas cap                        Rear Fender- Twisted chopper                        Front Fender- Russ Wernimont                        Oil Tank- DNA  Dyna “S” Dual coil Ignition, Progressive Shocks, BDL forward controls, Joker machine hand controls, Ultima Inverted front end stock length, PM Brakes, Exhaust Saxon, Dakota Digital Speedo, Ostrich Skin seat, frame powder coated Candy Orange Starburst, Paint By J.E.

HELLO, AND THANKS FOR LOOKING.  SOME OF THE PICS DID NOT UPLOAD WELL.  WE ALSO TOOK THE PICS LATER IN THE EVENING. BUT BELIEVE ME THIS IS A LONG, LOW, LEAN MACHINE!  IT IS A 2007 SPENCER BOWMAN CUSTOM RED/BLACK HIGH ROLLER PRO STREET.  IT HAS A ULTIMA 113 CI AND THE BIKE IS CHROMED OUT.  IT HAS A 330 REAR TIRE AND IS A MONSTER.  WE RARELY SEE A BIKE WITH THE SAME OR LARGER REAR TIRE.  WE HAVE OWNED 3 OTHER CUSTOMS AND THIS IS THE NICEST ONE WE HAVE OWNED.  THIS BIKE IS A SOFTAIL AND RUNS AND DRIVES GREAT.  IT HAS A WIMMER INTAKE. THE BIKE AS YOU CAN SEE HAS NICE FLAMES AND GETS ALOT OF ATTENTION.   THE RIMS ARE PAINTED RED TO MATCH THE FRAME IN RED AND REALLY SETS THIS BIKE APART FROM THE OTHERS.  THERE IS VERY SLIGHT PITTING ON THE BIKE IN A COUPLE AREAS.

2006 Hilltop Custom Chopper, 300 soft tail with 117 cu in S&S motor, Twisted Sister pipes, BDL drives and controls.  Beautiful paint with blue flames, Danny Grey seat and very low mileage.  Purchased as a kit and assembled by a local shop here in Washington.  This is a beautiful bike at a reasonable price. .   Contact Craig at 425-870-8099 

Pro-Street V8 motorcycle with polished hi-rise tunnel ram and (2) 600 Holley carbs. Original manufacturer was a "American King V" in Baton Rouge, LA. 350 Chevy motor with approx. 3,800 miles.

THIS IS A BEAUTIFULL CUSTOM BAGGER......BUILT WITH HARLEY PARTS.....MIAMI CHOPPERS TITLE AS CUSTOM BIKE....LOTS OF XTRAS...WHY SPEND 20K ON A NEW BIKE AND ADD 15K IN XTRAS WHEN YOU CAN HAVE ONE ALREADY DONE FULLY CUSTOM FOR LESS THAN HALF...HARLEY TRANSMISSION,HARLEY ENGINE..21 CHROME RIM...LOWERING KIT WITH 3 HIGH POSITIONS..RINEHART EXAUST...  EXTENDED BAGS AND FENDER,CUSTOM BARS...CUSTOM SEAT..ARLEN NESS FORK BOOTS ....ANY CHANGES OR PAINT WORK.. THAT YOU WANT TO DO...WE CAN DO IT FOR YOU AT COST LIKE NEW.. THANKS AND GOOD LUCK BIDDING YOU CAN ALSO CALL ME AT 305-992-0196 THANKS    

THIS IS A BEAUTIFULL CUSTOM BAGGER.........MIAMI CHOPPERS TITLE AS CUSTOM BIKE....LOTS OF XTRAS 6 SPEED BAKER TRANSMISSION,HARLEY ENGINE RIDES EXTENDED BAGS AND FENDER,CUSTOM BARS LIKE NEW THANKS AND GOOD LUCK BIDDING YOU CAN ALSO CALL ME AT 305-992-0196 THANKS    

 2004 custom build, motor is a 2007 Ultima 120ci. , Baker 6 speed transmission, only the best components used to build this motorcycle. Great for a taller rider.

****PRICE REDUCED**** Don't have any room for this bike, that's why its at the bike shop for sale. Must sell! Can't come back home!

2004 Pro-Street Chopper 2 Time Award Winning – Best In Class/Best In Show ·      Custom Diamond Chassis 7” back bone stretch ·      Custom Oil Bag ·      100cu inch Rev Tech Polished Engine o  Edelbrock 2 barrel carb & intake o  100+ Horse power ·      Pingel Polished Fuel Value & Filters ·      Rev Tech 6 Speed Polished Trans o  1 ½ belt Drive o  All Custom Polished Pulleys BDL 3” Primary Belt Drive - Polished o  Custom Chrome High Crank Starter o  Low-Boy Odyssey Drycell Battery ·      Custom Bars / Upper Controls o  Hidden Cables ·      All Custom Sheetmetal ·      Headwinds 7” Head Lamp ·      Custom LED Brake Light/Blinkers ·      Custom Airbrush Paint Job – 17+ coats ·      Performance Machine Front & Rear Disc Brakes ·      Performance Machine Foot Controls ·      Custom Stingray/Leather Seat o  2 Stage Padding ·      Custom Fat Fork Design ·      Billet Polished Aluminum Wheels ·      Avon 250 Rear Tire ·      Avon Front Tire ·      Must See To Appreciate!! BUYER RESPONSIBLE FOR PICKUP OR SHIPPING, REQUIRES $500 DEPOSIT IMMEDIATELY FOLLOWING THE CLOSE OF THE AUCTION. GOOD LUCK B

 I'm a private seller who has own the bike for seven years.  Bike is in great condition, but looking to sell or trade to buy a mustang.  It has inverted forks, modified beach bars, a brand new battery, high torque starter, Corbin two person seat, thunder header, compression release in the heads, Carlini racing mirrors, left hand belt drive, Super G carburetor, a brand new speedometer and tac, forward controls, LED headlights and taillights and LED lights under the frame and motor.  The bike is 96 cubic inch with S and S.

Softail Custom Bike Spiderman Year 1998 Low miles Patrick Billet Engine Bub Exhaust PM Foot Controls Arlen Ness Parts Billet Wheels

Beautiful 2001 Pro-One, 113" All Polished S&S engine, Dyno @ 107 HP with 115 Lbs of  Torque. Jims 6-Speed Transmission, Vance & Hines 2 into 1 Exhaust, Quad 4-Link rear suspension, 5" stretch frame, 38 degree rake front end, Everything Polished or Chromed, Eye catcher Candy Orange Paint with graphics. Minimal small chip in rear fender.  Beautiful Bike, Fast, fun and comfortable to ride.

Flawless 114 Cubic Inch 1860 cc 2300 Miles Custom seat with blue flame stitching Matching removable passenger seat Custom paint by Buck Wild Vance & Hines Big Radius Exhaust Pro-One chrome plated billet aluminum wheels with matching brake rotors, and pulley stainless brake rotors with chrome billet aluminum centers 300mm Avon rear tire, right side drive 41mm chrome front suspension, featuring hard-chrome fork tubes Dual adjustable shock rear suspension Pro-One billet aluminum 4-piston brake calipers Custom fuel tank with flush mount cap, 4-gal capacity Pro-One stinger handlebars with all-in-one digital readout instrument console Braided stainless steel brake and oil lines Fully polished engine with chrome accessories 45mm Mikuni carburetor

THIS IS A MEAN LOOKING BIKE. COMPLETE CUSTOM PAINT AS PICS SHOW. BIKE HAS LESS THAN 3000 MILES ON IT.

This is a custom built street legal chrome moly frame dragster / street bike custom built fenders and gas tank custom built vulcan extra wide front end with a 140 front tire dual disc chrome performance machine calipers all around RCcomponent rims custom gas built gas tank notched at bottom for a forced wind air cleaner the eyes of the chrome skull on the tank are your neutral and oil light the motor is a 120 inch fresh fully polished merch motor the motor produces a TRUE 118 hp to the rear wheel also with compression releases 5 speed polished tranny chrome inner and outer primary THERE IS NO CLUTCH ASSEMBLY it was used on another project the rear tire size is a 295 THIS BIKE FLIES!! Some of the chrome is pitted and the paint is chipped I am getting rid of this bike due to being disabled and able to ride any more it took me 3 years to build and has my heart and sole in it good luck bidding you will not be disappointed

Pro Street. 96ci S&S Motor on Daytec Frame, Pro One Front end. Thunderheart Electronics.

 Main components of the 2008 Custom Chopper are as follows: One of One Made Mileage Under 2,500 High-Dollar Living Flames Custom Paint Job 127 c.i./2081 c.c. Show-Polished Ultima Engine ~ 140 HP and 145 Lbs/Foot Torque at the Rear Wheel 6 Speed Ultima RSD Transmission Hydraulic Clutch Avon Venom 120mm Front Tire Avon Venom 300mm Rear Tire Widow Wheels and Rotors 40 Degree Rake 2" Single Down Tube 5" Stretch Down Tube CCI Headlight & Tail Light Martin Brother Exhaust Pipes LA V-Fly Handle Bars Custom Cut Fenders D&D 4" Stretched Gas Tank With Pop Up Gas Cap Spiked Air Cleaner Tricky Air Ride Suspension Braided Lines & Cables Hawg Halter Front Brake Lucky Brake Rear Transmission Brake Chain Drive Arlen Ness Mirrors Pro One Front End Liquid Filled Oil Pressure Gauge Dakota Digital Speedometer/Tachometer/Odometer/Trip Gauges Phone David to arrange showing ~ (414) 779-1004 !!!   CASH PAYMENT IN PERSON IS REQUIRED   !!!

***BEST OF SHOW WINNING BIKE... Paint: Pearl White w/ candy blue stripes  Engine: 107 CI. S&S  Trans: 6 speed Primo  300 rear tire  air ride suspension  hand made custom sheetmetal work  Bike is made after a 68 Camaro SS...You wont find one nicer and also a driver...bike currently has 1700 miles on it, and drives and runs great, very dependable!  MAKE ME A REASONABLE OFFER SEE VIDEO on youtube, email me for the link if you cannot find it.

condition is in like new .all though many imperfections ,as that is the type look I was after when building .the bike is tabbed and passes all Washington State requirements and a file receipt history come with. 100 0/0 legal dot approved in the US.

~iMMACULATE CUSTOM PRO STREET~ "Collector Quality" "EL SCORPION ROJO" One of kind and like New  Super Custom Show Quality Custom Bike all metal Fabrication by MGS CUSTOMS  This beauty has to many Custom Features and needs somebody who can ride this work of art, Bottomline to  many toys and no time !!!!   Bike Details list.   21" chrome front wheel with matching 18" chrome rear - PM wheels   250 tire.

                                                                                                                        2013 one of a kind drop seat hot rods                            by big Tony's Chopp Shop    Built by the mid-wests number one custom bike shop. We build the nations baddest custom motorcycles. We are a federaly liscensed manufacturer and issue titles with our bikes. These bikes pictured are examples of our latest in big wheel bikes from Mid level 18/21 chassis to our all out radical High End 20/23 chassis. Starting at 55k, these Bikes are 9 -10 foot long and start with a made for (b.t.c.s.) exclusive one off chassis. We start with a -1 in.

FEATURED IN THE OCTOBER 2004 EDITION OF EASYRIDERS BUILT BY RIFF RAFF CUSTOMS LOOK AT THESE SPECS... 113 CUBIC INCH DISPLACEMENT S&S MOTOR 112 HORSEPOWER 124 FT/LB TORQUE 6 SPEED TRANSMISSION S&S CARB K&N AIR FILTER LA CHOPPERS CUSTOM PIPES CRANE HI-4 FIREBALL IGNITION PRIMARY DRIVE BDL 1999 ROLLING THUNDER FRAME & OIL TANK INDEPENDENT GAS TANK BLACK HOUSE OF KOLOR PAINT W/PLATINUM TRIBAL GRAPHICS ARLEN NESS FRONT END 38 DEGREE RAKE 2 INCHES UP & OUT HIDDEN SHOCK CORBIN SEAT PERFORMANCE MACHINE FRONT BRAKE & ROTORS PERFORMANCE MACHINE REAR BRAKE & ROTOR PERFORMANCE MACHINE FRONT 19" X 2.75" WITH METZELER FRONT TIRE PERFORMANCE MACHINE REAR 18" X 8.5" WITH METZELER 240 REAR TIRE PERFORMANCE MACHINE HANDLEBAR & FOOT CONTROLS   Bike has always been garaged and only has less than 200 miles, never registered.  Comes with MSO for the frame, S&S Engine Certificate, and California Department of Motor Vehicles of Verification of Vehicle done by California Highway Patrol.  Bike inspected by my local motorcycle shop and ran thru a 27 point inspection.  Documentation available of build cost (Approximately $38K) and recent inspection.  New battery installed and runs flawlessly.  Bike comes with Easyriders magazine and sign from bike show.  Email or call (559-790-3794) with any questions.  Must see to appreciate the workmanship and detail!  Shipping assistance available in California, out of state buyers please use USHIP to get a quote on shipping to your location.

2006 ARLEN NESS LOWLINER, 11000 MILES. Incredible black, Blue, and silver Skull graphics.S and S 124 premium polished motor and 6-spd transmission. Ness Y2k frame, with twin billet progressive shocks and rubber-mounted motor for unbelievable ride comfort.

Custom built show motorcycle. Rigid frame. Rev Tech 88 inch engine.

<div style="text-align:center"><img src="http://ti2.auctiva.com/sw/java.gif" border="0"><br><table align="center"><tr><td><a style="text-decoration:none" href="http://emporium.auctiva.com/pbclvinc" target="_blank"><img src="http://ti2.auctiva.com/sw/browse2.gif" border="0"></a></td><td height="21px" valign="middle" align="center"><font face="arial" size="2"><b><a href="http://emporium.auctiva.com/pbclvinc" target="_blank">pbclvinc</a> Store</b></font></td></tr></table></div> <img src="http://ti2.auctiva.com/web/aswCredit.gif" border="0"><br><a href="http://www.auctiva.com/?how=scLnk0" target="_blank"><img src="http://ti2.auctiva.com/images/sc1line0.gif" border="0"></a> Dynamic Choppers - Psycho 280 35 MILES FROM NEW   This was a test ride bike, only went out a few times, approximately 35 miles, never registered It has  17 digit VIN number, KBB registered comes with a manufacturers MSO for easy registration financing and insurance  basically like new, few minor scuffs from being in storage for five years on bottom of the frame  this is the most balanced bike and lightest feeling you will EVER sit on, guaranteed  WHEN NEW IN THE SHOWROOM IT WAS LISTED AT $33,500 price is this than half its value to owner leaving the country   280 RACING STRIPE - 2007 5" OUT 2" UP RIGID FRAME AMERICAN SUSPENSION PHANTOM FORKS WELD RACING WHEELS 18 inch front and 280 rear METZLER TIRES HD EVO 80" MOTOR PRIMO RIVERA 6 SPEED TRANSMISSION 3" BDL OPEN PRIMARY HHI FOOT CONTROLS & REAR DRIVESIDE BRAKE JAYBRAKE HAND CONTROLS PERFORMANCE MACHINE GRIPS CUSTOM SHEET METAL FLAT BLACK WITH FLAT SILVER RACING STRIPE CUSTOM 2 INTO 1 EXHAUST CERAMIC COATED WIRED INTERNALLY KELLEY BLUE BOOK LISTED - NEVER REGISTERED   AMINA MUNSTER IS NOT INCLUDED IN THE SALE   delivery is the responsibility of the buyer, all cost incurred will be the buyers responsibilty...the motorcycle shown is sold in as is/ where is condition with no warranty given or implied on any individual part of the motorcycle as a whole. any inspection is welcomed new owner will be the first to register and will recieve MSO certificate for registration payment will only be accepted as CASH in person or a wire transfer and once cleared the bike will be released motorcycle can be stored up to THREE MONTHS free if paid in full first, so you have time to arrange your best shipping deal and not be any rush    <div style="text-align:center"><a style="text-decoration:none" href="http://mostpopular.sellathon.com/?id=AC970281"><img src="http://www.sellathon.com/Resources/Images/countercredit.gif" border="0"></a></div>