-
1979 Honda CBX (1979)
TIMS has a ground up every nut and bolt custom restoration for sale-- --everything has been rebuilt or replaced 100% including the motor ,carbs ,brakes, etc-it has tons of performance parts including falicon crank ,falicon rods,ported and polished head TIMS exclusive 67.5mm high compression pistons, TIMS exclusive cr roundslide carbs with k/n filters,TIMS stainless steel brake and oil lines, all brakes and calipers completely rebuilt,it has TIMS exclusive dyna ignition, dyna coils and wires- as well as TIMS exclusive euro polished alternator--it has upgraded prolink front suspension with prolink vented disc and twin puck calipers, custom swing arm with kosman widened wheel with metzler marathon tires (160-60-18 rear)-it has an immaculate custom black paint job with red ghost flames, corbin gunfighter seat,piggy back rear shocks, custom motor mounts, 6/1 exhaust--it is basically a brand new bike with all of our upgrades and the bike is fast as all get out as well--its ready to ride or show--TIMS will assist in shipping worldwide at buyers expense--check our other auctions for more cool cbxs and parts--contact us at 1-877-TIMSCBX with any questions--2016-07-01 04:44:58Cornelia, Georgia, United States50019000 -
1979 Honda CBX (1979)
TIMS has a streetfighter themed 1979 honda cbx for sale--we built it last summer--it has a 0 mile prolink motor with the prolink quiet clutch in it along with our custom cr roundslide carbs,it has a rare bassani competition 6/1 header--modern suspension front and rear with 17 inch wheels, a ducati bi posto seat and cowl, streetfighter fairing ,electronic gauge cluster, all works but the tach, we couldnt figure how to hook it up ) it has a custom black satin/gloss paint job with an aircraft flush mount gas cap.lots of custom billet pieces, our custom euro alternator conversion, dyna coils, ign and wires--this cbx is a one of a kind cbx that would get all the attention at any bike night or even a bikeshow--TIMS will assist in shipping anywhere in the world at new owners expense---check out TIMS other auctions for more cool cbx parts and bikes--2016-07-01 04:44:43Cornelia, Georgia, United States315,000.00 -
1979 honda cbx (1979)
TIMS has an extremely nice 1979 bone stock honda cbx--it is in near perfect condition and runs absolutely great--there are no issues with the bike,the carbs are clean,clean ,clean--the clutch has no chatter whatsoever and everything works like it should, the tires are like new,all plastics still have the oem patina look with no fading anywhere,the wheels are super clean,the gas tank has no rust whatsoever in it,the seat is in great condition with no splits tears or rips,the motor is really clean with no oil or gas stains--the only flaws even worth mentioning are 1--a small bubble in the lower pinstripe on the gas tank back near where it meets the seat on the left side and 2--a small slit in the airbox at the seam about 3/8 inch long on the left side as well,but both are hardly noticable--ive driven this bike a couple times and its very tight and shifts smoothly through all gears and the brakes work great as well,the pipes are original oem hm422 and have no scratches,dents or typical underneath rust----this bike is nice enough to put in a collection but ready to ride anywhere as well--you dont find many low mileage bikes that are ready to ride so dont miss out on this one --TIMS will assist with shipping here in the us or overseas as well at the new owners expense--TIMS will be at barber vintage fest from the 9th-13th so we will be unavailable for showing the bike during this time --2013-10-14 00:06:52Cornelia, Georgia, US9,3968,600.00
Honda CBX Price Analytics
Moto blog
Honda has applied for a European Vehicle Type Approval for a new model
Fri, 06 Aug 2021Earlier this year, a Japanese company patented the name and layout of the new NT1100 model. A while later, renderings of what a sports touring car with the engine and transmission from the CRF1100 Africa Twin might look like appeared on the network. Since then, no new information about the appearance of the NT1100 has been leaked, but just the other day it became clear that the model will be presented soon.
Honda has unveiled the 2022 CRF450RX
Fri, 04 Jun 2021There are no crutial changes, the manufacture's engineers, with the help of factory racers, were fine-tuning the motorcycle. As a result, the enduro CRF450RX, like the cross-country CRF450R, received a retuned electronic engine control unit, as well as recalibrated shock absorbers, which had a positive effect on enduro handling.
Honda has announced plans to go completely zero-emission
Sun, 30 May 2021The company President Toshihiro Mibe said that Honda is committed to being completely carbon-neutral across all of its products. To do this, the company is expanding the range of electric vehicles and has also developed a standard for replaceable batteries Honda Mobile Power Pack.
Looking forward to the NX200 - Honda's new touring enduro
Thu, 06 May 2021It will be a real adventurer, only a small one. The motorcycle will focus on the Asian markets. These isn't much information about the bike yet, but it is preliminary known that it will be built on the CB190 platform and will receive a single-cylinder engine with a displacement of 184 cc.
The other day, Honda patented the name and layout of the NT1100 motorcycle
Fri, 12 Feb 2021The Africa Twin parallel twin will be installed in another chassis - an asphalt tourist one. Unfortunately, at the moment there are no official pictures, only the fantasies of fans and third-party designers. Only one thing is clear - the engine will be 1100cc, and just like the CRF1100 Africa Twin touring enduro and CMX1100 Rebel chopper, the engine will be offered with both a conventional motorcycle foot-shift gearbox and a DCT robot.
Honda has updated its flagship GL1800 Gold Wing tourer for 2021
Tue, 19 Jan 2021There are no radical changes, improvements have affected parts of Honda tourers that are important for ensuring the comfort of the rider. In addition, new color and graphic schemes have appeared for the 2021 models. The Tour version has Gunmeatal Black Metallic and Candy Ardent Red.
Honda introduced the European version of the MSX125 Grom 2021 model year
Sat, 12 Sep 2020The legendary microbike received an engine that complies with Euro5 standards and significantly upgraded looks. In addition, the MSX125 will now also be sold under its own name Grom on the European market. Honda Grom received an updated 125cc single-cylinder engine with 9.6 horsepower, aggregated with a five-speed gearbox instead of the previous "four-speed".
Honda will introduce the new CBR600RR later this year
Wed, 08 Jul 2020There has been no official information from Honda about the new generation CBR600RR yet, but it became known that the 2021 model will echo the older Fireblade in terms of its exterior. The "Six hundred" will receive a "two-eyed" LED head optics, the air intake will be located in the middle. Winglets will be added to the fairing to increase downforce at high speeds.
Honda has patented a technical solution from the arsenal of the Gold Wing tourer.
Thu, 02 Apr 2020The modern Honda Gold Wing is equipped with a double wishbone front suspension, which not only increases ride comfort, but also allows the geometry of the motorcycle not to change during acceleration and braking. Lever suspension, which stabilizes the bahavior, may appear on other models of the company in the future. This is hinted at by patent images of similar systems integrated into the design of completely different motorcycles - the “classic” CB1100 and the small-capacity C125 Super Cub.
Little brother: Honda introduced a "nano version" of the X-ADV scooter
Sun, 11 Aug 2019The model is called ADV 150 and, despite its similarity with the X, it has nothing to do with it. The engine is a single-cylinder with a volume of 149.3 "cubes", developing 14.2 hp at 8500 rpm and 13.8 Nm at 6500 rpm. Suspension is a regular telescopic fork and two Showa rear shocks.