Hodaka All Motorcycles in Utah

YOU ARE BIDDING ON ONE BONANZA FRONT FORK BOLT PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON BONANZA NOS JAPAN FOOT PEG RUBBER (B) PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

PARTS IN THIS LISTING ARE FROM: 1976 HODAKA WOMBAT 125 (03) YOU ARE BIDDING ON: STATOR ALTERNATOR COILS CONDITION: GOOD USED PART. PLUGS ARE GOOD. WIRING NEEDS A LITTLE TAPE.

YOU ARE BIDDING ON  BONANZA KILL SWITCH PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

Seat is in poor shape.no damage to seat pan .pad damaged at tear in cover.

YOU ARE BIDDING ON ONE BONANZA MOTOR SPROCKET CHAIN PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

PARTS IN THIS LISTING ARE FROM: 1976 HODAKA WOMBAT 125 (03) YOU ARE BIDDING ON: GEAR SHIFT SHAFT CONDITION: GOOD USED PART. NOT BENT. SPLINES ARE GOOD.

CLICK THE PICTURE TO VIEW LARGE CLOSE-UP DETAILED PICTURES. FACTORY OEM MANUAL:  OWNER'S MANUAL AND ILLUSTRATED PARTS LIST for           HODAKA 100 / 99 ROAD TOAD * PUBLISHED: N/A * PART #: 029510 * PAGES: 51 MANUAL IS USED.   BOOK IS COMPLETE, NO MISSING PAGES.

YOU ARE BIDDING ON ONE BONANZA NOS REAR WHEEL FLANGED BRAKE DRUM PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA THROTTLE CABLE 4' 10'' PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

PARTS IN THIS LISTING ARE FROM: 1976 HODAKA WOMBAT 125 (03) YOU ARE BIDDING ON: CARBURETOR CONDITION: EVERYTHING MOVES GOOD. CHOKE MOVES GOOD. SLIDE MOVES GOOD.

YOU ARE BIDDING ON BONANZA NOS HURST AIRHEART MASTER CYLINDER OVERHAUL 120 8310 PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON BONANZA NOS PALO ALTO HUB HALF (A) PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA CLUTCH PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA JACK SHAFT DRIVE SPROCKET PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA NOS THROTTLE TWIST PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA EXHAUST PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON BONANZA NOS HURST AIRHEART CALIPER OVERHAUL 02-8060 02-8213 12-8073 PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA CHAIN PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON BONANZA NOS PALO ALTO HUB HALF (B) PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

PLEASE READ: May fit other years and other models but it is the responsibility of the buyer to verify this before purchase as we cannot guarantee this.  Remember...Used parts have the usual minor scratches and wear. This may or may not be visible in the photos provided. Wear items such as bearings, bushings, light bulbs, brake pads, tires, etc.

YOU ARE BIDDING ON ONE BONANZA JACK SHAFT DRIVE CHAIN PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA THROTTLE TWIST GRIP PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA NOS SMALL JACK SHAFT SPROCKET PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA FRAME IS IN GOOOD SHAPE THERE IS SURFACE RUST AND BOTHE OF THE FOOT PEG BRACKETS ARE DAMAGED PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

YOU ARE BIDDING ON ONE BONANZA SEAT PLEASE LOOKS AT ALL OF THE PHOTOS, THANKS!

PARTS IN THIS LISTING ARE FROM: 1976 HODAKA WOMBAT 125 (03) YOU ARE BIDDING ON: CLUTCH BASKET DISC ASSEMBLY CONDITION: GOOD USED SHAPE. SEE PICTURES. COMES AS SHOWN.

PARTS IN THIS LISTING ARE FROM: 1973 HODAKA COMBAT WOMBAT 125 MODEL 95 YOU ARE BIDDING ON: FRONT FENDER BRACKET CONDITION:  DOES NOT APPEAR BENT. MOUNTS GOOD. HAS PITTING INFO ABOUT THE BIKE IT WAS TAKEN OFF OF.

PARTS IN THIS LISTING ARE FROM: 1976 HODAKA WOMBAT 125 (03) YOU ARE BIDDING ON: CRANKSHAFT CONDITION: SPINS FREE. NO UP & DOWN PLAY. BOTH ENDS ARE GOOD.

This part came off of 64-67 Hodaka Ace 90 (frame# A4246). What was left of the bike was abandoned in a field outside of Moab utah for a long time. For condition, please look closely at the pictures as I try to take detailed photos so that you know what you are buying.

Hodaka Ace 90 rear mud protector.  In good condition, all of the snaps are good, none are broken.  OEM Please remember that the motorcycle parts are used, most are vintage and will have wear associated with them.

PARTS IN THIS LISTING ARE FROM: 1973 HODAKA COMBAT WOMBAT 125 MODEL 95 YOU ARE BIDDING ON:  GAS CAP CONDITION: NO CRACKS OR DAMAGE. THREADS GOOD. INFO ABOUT THE BIKE IT WAS TAKEN OFF OF.

THIS PART IS OFF OF A: HODAKA ACE 100,  BUILD DATE IS MAY 1971,  FRAME # B-57698 FOR AUCTION: .FOOT BRAKE PEDAL. CONDITION: LOOKS LIKE IT WAS LENGTHENED AND MAY BE BENT A LITTLE. USED AND SHOWS SCRATCHES AND WEAR..

THIS PART IS OFF OF A: HODAKA ACE 100,  BUILD DATE IS MAY 1971,  FRAME # B-57698 FOR AUCTION: .OIL DIP STICK. CONDITION: GOOD PIECES. NO DAMAGE, USED AND WEATHERED.

PLEASE SEE PHOTOS BELOW... This part may work on many Models/Makes/Applications. Please check with your favorite local Dealer/Website/Mechanic to confirm.Thanks!

THIS PART IS OFF OF A: HODAKA ACE 100,  BUILD DATE IS MAY 1971,  FRAME # B-57698 FOR AUCTION: .REAR AXLE BOLT. CONDITION: GOOD USED PIECE. HAS SURFACE RUST.

THIS PART IS OFF OF A: HODAKA ACE 100,  BUILD DATE IS MAY 1971,  FRAME # B-57698 FOR AUCTION: .FRONT AXLE BOLT. CONDITION: GOOD USED PIECE. HAS SURFACE RUST.

1972 - 1973 HODAKA WOMBAT GASKET SET This gasket is cut from material equal to or exceeds OEM quality. We have many more gaskets that we can cut, If you do not see the gasket you need send us an email with Year, make, model and gasket you need, We will see if we can have it cut for you.  We use a Gasket-on-Demand program and cutter, with material that is equal to or exceeds OEM quality!  Material INFO: Made By "Inter Face Solutions" in the "USA" PF-4N Description: PF-4N has a fully cured nitrile butadiene rubber binder for maximum fluid resistance. It has excellent sealability in a variety of environments and flange conditions. It is intended for applications with short duration maximum temperatures up to 290oC (550oF).

CLICK HERE FOR MORE HONDA CB750 PARTS!!! PLEASE SEE PHOTOS BELOW... This part may work on many Models/Makes/Applications.

1972 HODAKA SUPER RAT GASKET SET A This gasket is cut from material equal to or exceeds OEM quality. We have many more gaskets that we can cut, If you do not see the gasket you need send us an email with Year, make, model and gasket you need, We will see if we can have it cut for you.  We use a Gasket-on-Demand program and cutter, with material that is equal to or exceeds OEM quality!  Material INFO: Made By "Inter Face Solutions" in the "USA" PF-4N Description: PF-4N has a fully cured nitrile butadiene rubber binder for maximum fluid resistance. It has excellent sealability in a variety of environments and flange conditions. It is intended for applications with short duration maximum temperatures up to 290oC (550oF).

CLICK HERE FOR MORE HONDA CB750 PARTS!!! PLEASE SEE PHOTOS BELOW... This part may work on many Models/Makes/Applications.

1973 HODAKA COMBAT WOMBAT GASKET SET A This gasket is cut from material equal to or exceeds OEM quality. We have many more gaskets that we can cut, If you do not see the gasket you need send us an email with Year, make, model and gasket you need, We will see if we can have it cut for you.  We use a Gasket-on-Demand program and cutter, with material that is equal to or exceeds OEM quality!  Material INFO: Made By "Inter Face Solutions" in the "USA" PF-4N Description: PF-4N has a fully cured nitrile butadiene rubber binder for maximum fluid resistance. It has excellent sealability in a variety of environments and flange conditions. It is intended for applications with short duration maximum temperatures up to 290oC (550oF).

This tank came off of a 1970 Hodaka ace 100 (frame# A45441). It has been sitting outside for at least 10 years in the desert near Moab Utah. Please look closely at the pictures for condition.

Excellent condition, even for 52 years old!  Came in a parts lot that I purchased but I have no use for them.  Cleaned in a sonic washer.  Some internals still look new. No slop in shift mechanism. Original metal dip stick shows "channel-lock pliers" damage, ribbed edge is stripped.

This tank came off of a 1970 Hodaka ace 100 (frame# A45441). It has been sitting outside for at least 10 years in the desert near Moab Utah. Please look closely at the pictures for condition.

CLICK HERE FOR MORE HONDA CB750 PARTS!!! PLEASE SEE PHOTOS BELOW... This part may work on many Models/Makes/Applications.

This tank came off of a 1970 Hodaka ace 100 (frame# A45441). It has been sitting outside for at least 10 years in the desert near Moab Utah. Please look closely at the pictures for condition.