Harley Chopper / Bobber Project on 2040-motos
French Lick, Indiana, US
Bobber Bobber tech info
Bobber Bobber description
A NON REFUNDABLE DEPOSIT PAYMENT OF $1,000 WITHIN 24 HOURS AFTER THE END OF THE AUCTION AND THE BALANCE TO BE PAID IN A CERTIFIED BANK CHECK OR CASH WHEN BIKE IS PICKED UP. BUY WITH CONFIDENCE ") I TELL IT LIKE IT IS CHECK MY FEEDBACK * 100% POSITIVE SOLD AS DESCRIBED, AS IS NO WARRANTY, NO RETURN NON PAYING BIDDERS WILL RECEIVE NEGATIVE FEEDBACK I reserve the right to end the auction early if this item is sold locallyYOU ARE BIDDING ON A 1979 HARLEY CHOPPER / BOBBER PROJECT
THIS IS A CLEAR TITLE, ALL MATCHING NUMBERS 1000CC IRONHEAD SPORTSTER… I BOUGHT THIS BIKE FROM A GOOD FRIEND ABOUT 7 YEARS AGO. IN THE PIC’S YOU CAN SEE WHAT IT LOOKED LIKE WHEN I GOT IT, MILDLY CUSTOMIZED WITH PAINT, PIPES, WHEELS, CARB, SEAT & BARS… HE WAS TOLD THERE HAD BEEN SOME MILD ENGINE MOD’S BUT WAS UNSURE EXACTLY WHAT HAD BEEN DONE. ALL I CAN TELL YOU IS THE BIKE RAN VERY STRONG. I SPENT EVERY EVENING AFTER WORK FOR MONTHS POURING OVER CATALOGS AND ORDERING NEW PARTS TO MAKE IT LIKE THE MOCK-UP WHICH IS THE PIC SHOWN IN THE COVER AD… I REMOVED THE REAR FENDER STRUTS, CUT DOWN & CUSTOMIZED REAR FENDER SO IT IS ONLY INCHES PAST THE BACK OF THE SOLO SEAT, SHAVED / LATHED FORK LOWERS OF REFLECTOR BLOCKS & FENDER MOUNT TABS AND PUT IN MANY HOURS HAND SANDING & POLISHING TO FINISH THEM AND A BUNCH MORE LABOR PREPING FOR THE BUILD. A PARTIAL LIST OF ALL NEW ITEMS WHICH HAVE BEEN STORED IN MY DUSTY SPARE BEDROOM AT HOME, UNUSED & NEW, MOST ALL IN PKG:
ULTIMA WIRE WHEELS & DUNLOP TIRES MOUNTED & BALANCED WITH POLISHED STAINLESS ROTORS & CHROME SPROCKET, REAR AXLE WITH SPIKE END NUTS AND NEW DIAMOND CHAIN W/MASTER LINK. TIRE SIZES ARE: REAR = 150/80-16 * FRONT = 80/90-21. THE 150 REAR IS AS BIG AS YOU CAN GO WITHOUT FRAME MOD’S. S&S SUPER “E” CARB,
W/ DAMPER KIT, FIT WITH ONE OF A KIND HAND MADE KNURLED ALUM. GRIPS, A SINGLE 2.5” DIA. SPEEDO W/CABLE & CHROME FRT. AXLE DRIVE UNIT AND A GERMAN MADE 6” DIA. H4 HEADLIGHT W/BRACKET, PAUGHCO 2PC. DUAL UPSWEEP SLASH CUT DRAG PIPES W/BRKT., POWDER COATED BLACK FRAME BRACKET WITH CHROME REAR CALIPER, FORWARD CONTROLS, CHROME PRIMARY COVER W/GASKET, CHROME FINNED MASTER CYL. COVER, CHROME LOWER FORK STEM COVER, CHROME FORK TUBE CAP BOLT, V-TWIN CHROME REAR AXLE ADJUSTERS AND THE LIST JUST KEEPS ON GOING……
THE RESERVE IS PRETTY MUCH EQUAL TO MY COST ON WHAT I SPENT FOR JUST THE PARTS, SO IT’S LIKE THROWING IN THE TITLE, FRAME & MOTOR FOR FREE. IF THE RESERVE IS NOT HIT I WILL BE FORCED TO RE-LIST ALL ITEMS SEPERATELY. THIS IS QUITE A DEAL!!!!! THE FRAME & MOTOR WILL NEED CLEANED & PAINTED AFTER ANY ADDITIONAL MOD’S AND WIRING ARE MADE. I DON’T HAVE THE GAS TANK SHOWN ANYMORE, I WAS GOING TO USE A 3 GAL. SPORTSTER STYLE TANK. I HAVE DRAWN A VERY SIMPLE WIRING SCHEMATIC THAT WILL BE EASY TO DO IF YOU HAVE THE ABILITY TO INSTALL THE PARTS LISTED
PLEASE EMAIL QUESTIONS
NO SHIPPING PICK UP ONLY
A DEPOSIT PAYMENT OF $1,000 IS DUE WITHIN 24 HOURS OF END OF AUCTION
ITEM IS USED
PLEASE EMAIL QUESTIONS BEFORE BIDDING
BETTER TO ASK AND CONFIRM IMAGINATION
THEN TO IMAGINE BETTER AND NOT CONFIRM
Bobber Bobber for Sale
- Custom harley bobber 2010(US $9,000.00)
- Custom south florida choppers built bobber with springer front and ridged frame(US $4,550.00)
- 2007 custom bobber w/100 inch revtech and six speed(US $13,000.00)
- Custom show motorcycle(US $18,000.00)
- Rare zero engineering type 5 bobber - 113ci s&s - no reserve(US $15,000.00)
- Custom bobber chopper built by chop machine harley davidson sportster 1200(US $6,865.00)
Moto blog
2014 Lito Sora Electric Motorcycle Entering Production
Thu, 20 Feb 2014Canadian company Lito Green Motion announced the start of production for its SORA electric motorcycle. Described as a cafe racer with a bobber twist, the Lito SORA claims a top speed of 118 mph and a range of 124 miles in the city and more than 52 miles at highway speeds. Visually, the Lito SORA stands out from other electric motorcycles.
Mac Motorcycles
Thu, 28 May 2009British motorcycle design studio Xenophya Design and product designer Ellis Pitt have teamed up to produce a new company, Mac Motorcycles. Based out of Upton-Upon-Severn in Worcestershire, England, Mac Motorcycles will produce a line of bikes powered by Buells air-cooled single cylinder 492cc engines used in the Blast, with a tubular backbone frame. On the companys website, Pitt describes its bikes as being simple to maintain, include references and details from choppers and bobbers and feature Harley posture, flat-track manners, Ducati handling.
The Harbortown Bobber DVD Review
Fri, 22 Jan 2010On the surface, The Harbortown Bobber by One World Studios Ltd. is a documentary about the build/restoration of a bobber bike owned by Scott Di Lalla, co-founder of One World, and co-producer/co-director of Harbortown. However, what I took away from the 75-minute DVD was that the film is less about the skeletal remains of a 69/71 Triumph rising from the ashes, and more about the people (characters in a film for sure!) that help Scott along the way to realizing his dream of breathing life into a bobber of his own.
Bobber Bobber by State
| Bobber Bobber by City
| Bobber Bobber by Color |